Sell Motorcycle Nitrous Oxide Kit Single Bottle Hayabusa , suzuki drag nitrous kit in Hudson, Massachusetts, US, for US $259.00

This auction is for one new DynoTune
Dry Nitrous system for EFI motorcycles. Signle Bottle system for max performance and looks. Bracket Will be SILVER and the bottle will be SILVER. See notes at bottom of page.

SILVER BOTTLE AND SILVER BRACKET FOR THIS AUCTION

Contact DynoTune for other bottle and bracket colors.

Checkout the custom twin bottle Busa video of this system below:
To see the Twin Bottle DynoTune Busa Video click here

Click here to see video of the bottles being removed and filled!

This Uuniversal DynoTune dry kit will add up to an additional 40HP to your Ride. Comes with eveything you need for a complete installation.(some fabrication may be needed as this kit is universal) This Dry kit uses your bikes EFI sensors to add the additional fuel needed to make the Power! By passing the cool nitrous charge past the Air Temperature sensor in the intake track, we can fool the bikes EFI system into adding the little extra fuel you need to make some sweet power! Note: Consult your factory manual to make sure you have a "Air Temperature" sensor in your intake (Most EFI Bikes have a Temp sensor). Comes with three jet settings of 15HP, 30HP, and 40HP.

Comes with a single 12oz bottle(shown on bike above). Kit Comes complete with instructions on how to use your Horn or starter for nitrous activation making it a clean installation.

The Twin inlet system allows the user to configure the inlet any way they want. Single or dual snorkel intakes, its all in the kit! High Heat/Pressure teflon tubing inculded.

Note: In the Video, The Purge kit, V nozzle and braided line from purge solenoid are optional Items from DynoTune.

Note: Some fabrication and mounting screws/hardware is required to mount the billet bottle bracket. The frame or rear foot pegs are the best location.

The Kit contains the following:

1 12oz SILVER powder coated Nitrous Bottles
1 SILVER Billet bottle mounting brackets
1 two foot stainless bradied nitrous lines
175HP High flow Nitrous Solenoid
Solenoid mounting bracket with hardware
Twin mounting nozzles with mounts for dual snorkel intakes
High Pressure/Temperture Teflon Tubing (connects solenoid to nozzles)
"T" fitting and compression fittings
Nitrous bottle fill adaptor. Bottles simply twist off in seconds for the ulitmate in quick filling.
3 nitrous jets (NOS style) 15-30-40HP
Complete electrical kit with switches, wire, connectors and a complete manual showing how wire your horn or starter button as the activation switch.

NOTE: ZX-14 or GSXR requires an adaptor to mount the bracket to the bike, contact DynoTune direct for the adaptors. This auction is for the universal kit, not application specific but will work on any EFI motorcycle!

NOTE: Old style bracket shown above. All the new brackets shown below

will have the larger round knobs. The knobs are much easier to turn, will not come off, and the brackets are thicker and stronger than ever! It comes with a Gauge port built into the side of the bracket (1/8" NPT threads) plus the standard outlet fitting on the opposite side. (Gauge sold separate) All new kits will come with this style bracket(s). Contact DynoTune for different color brackets and bottles.

Mercedes plots McLaren buyout

Wed, 04 Oct 2006

By Georg Kacher Motor Industry 04 October 2006 09:00 DaimlerChrysler is planning a bid for the McLaren Group, to gain full control of its F1 operation and production of the SLR supercar. CAR Online asked DC boss Dieter Zetsche if he was considering extending Mercedes' stake in McLaren, to give the Germans control. 'It's one of the options we might exercise,' he said.

Bungling thief caught after stealing hire car's steering wheel

Thu, 27 Mar 2014

A DIM-WITTED criminal has been convicted of theft after stealing parts of a brand new Audi A3 hire car and replacing them with old bits taken from his much older Audi S3. Alexander Keating, a 23-year-old former bodyshop technician who lost his job following the conviction, stole parts as obvious as the steering wheel and gear knob from the A3 that his mum had hired after damaging her car in an accident. Keating foolishly believed no one would notice the battered old steering wheel on the otherwise shiny, new car, but sure enough the mismatched parts were spotted and the hapless bungler was caught by the car hire firm’s bespoke anti-fraud team Asset Protection Unit (APU).

Aston Martin Rapide base price will be less than $200,000

Mon, 07 Dec 2009

Aston Martin has set the base price for the Rapide in the United States at $199,950. For just less than $200,000, you'll get a Bang & Olufsen sound system, heated memory seats and an active suspension system. Of course, there will be options that push the sticker price above the $200,000 mark.

Motorcycle Nitrous Oxide Kit Single Bottle Hayabusa , Suzuki Drag Nitrous Kit on 2040-parts.com

Nitrous & Parts for Sale

Mercedes plots McLaren buyout

Bungling thief caught after stealing hire car's steering wheel

Aston Martin Rapide base price will be less than $200,000