New Axxess Ax-adct4 4-channel Adjustable Line Output Converter With Trigger on 2040-parts.com

A 4 Channel Adjustable, Line Output Converter (LOC) with Built-in Amplifier Remote Generator The AX-ADCT4 is designed to convert 4 channels of speaker level audio into 4 channels of line level audio that can be used by OEM amplifi ers. It can also be used with OEM radios to add aftermarket amplifiers. This device will also detect the presence of an audio signal and then generate a +12V output (verified by an illuminated LED) that can be used to turn-on an aftermarket amplifier.

Features & Specifications: The AX-ADCT4 is able to handle 80 watts per channel continuous input without over heating. The input circuitry is designed to correct the crossover distortion commonly found on standard LOCs while providing a high to low level step down of 6:1. Output audio level is infi nitely adjustable using the onboard, high quality potentiometers. The remote output or amplifi er trigger is rated at 500mA (+12V) and will easily handle an outboard relay if additional current is needed. The remote output will trigger instantaneously when the AX-ADCT4 detects a DC voltage on the white, left + audio input wire above 5V or a very low audio signal. It will shut off 60 seconds after no signal is detected.

Installation: The AX-ADCT4 should be installed on a stereo’s speaker output wires or the output wires on an OEM amplifi er of up to 80 watts per channel. These wires can be found behind the stereo in the dash, on the output of an OEM amplifier, or on the input terminals on the OEM speakers. Please refer to the wiring diagram for the input connection details.