New Bbc Big Block Chevy Aluminum Cylinder Heads 454 Hp 320cc Assembled Set Of 2 on 2040-parts.com
Rialto, California, US
| ||||||||
As with all Procomp cylinder heads, our Big Block Chevrolet heads are Gravity Die Cast.
This casting process creates a much more uniform and robust cylinder head.
With the increasingly large displacements becoming common, the need for more airflow is necessary.
If you are looking to build a 400-500+hp. engine, give our PC3021-396 heads a try.
They offer a smaller cross - section to increase the incoming air?s velocity, resulting in great driveability, power and economy.
On engines over 500hp., use the rectangle port PC3021 heads. The mid-size cross section works well on engines under 540cu.in. and under 7000RPM.
If you are working on a larger, or higher RPM engine, step up to the CNC ported PC3028 heads.
The added volume of the PC3028 intake ports ( 360cc ) helps to fill in the gap between As-Cast performance heads and All-Out racing heads.
If you?re looking for 750+hp the PC3028-125XLVJ with their competition valvejob fit the bill perfectly.
APPLICATION INFO:
Finished Part No: | PC3021 |
Valve Angle: | 24deg |
Valve Springs: | 2.250' / 1.88' |
Intake Volume: | 320cc |
Chamber Volume: | 119cc |
Comp. Valve job: | No |
Port Finish: | As Cast |
Chamber Finish: | As Cast |
Casting Material: | Aluminum |
CLICK IMAGE TO ENLARGE:

Head Gaskets
Due to the wide combustion chamber needed to fit around the large 2.250/ 1.880" valves, we recommend our PC5211 MLS head gaskets.
These gaskets are .041" thick, and fit bore sizes as large as 4.540" on all Mark IV and VI blocks, as well as aftermarket blocks.
Felpro 1017 gaskets will also work with these head/ block combos.
To install our BBC heads on Mark V blocks, you will need to use our PC5233L and PC5233R Elite Series MLS head gaskets.
Alternatively, you can use Victor Reinz # 4918(R) & #4923(L) head gaskets on Mark V blocks with our heads.
Intake Gaskets
The PC3021 heads work well with our PC3289 rectangle port gaskets.
The PC3021-396 heads require our PC3290 oval port gaskets.
If you prefer Felpro gaskets, the PC3021 heads take a 1275 or 1275-5 gasket, depending on the thickness you require.
The CNC-ported heads (PC3028-125) are matched to the Felpro 1275 & 1275-5 gaskets.
Push Rods
Our aluminum 23deg. heads typically use +.100' (longer than stock) pushrods.
Depending on the components used, it is possible that you may need pushrods shorter or longer than that so we recommend that you use an adjustable pushrod to dial in your rocker geometry and order pushrods to match.
Spark Plugs
Our heads require the use of 14mm. x 3/4" reach 5/8" hex gasket seat sparkplugs.
Some recommended plugs are; NGK BCPR6ES or R5671A-7, Champion RC12YC, Autolite AR3923 or AR3924.
Remember these are for mild street engines. Higher compression or boost requires colder sparkplugs!
Head Bolts / Studs
Due to the raised (+.625") exhaust port location on our heads, +.100" longer bolts / studs are needed next to each port.
Use our pn# PC2452-6100 Headstud Kit. ARP #135-3703 12pt. Headbolts, and #235-4303 Headstuds work too.
If you already have a standard BBC headstud kit and are just looking for the 8 +.100" studs, use our pn#2452-6100-8 or ARP # 235-4306.
These heads should be torqued to 65ft.lbs. using high pressure moly lube or 70ft.lbs. using 30wt. oil.
Exhaust Gaskets
Our BBC heads utilize a 1.88" x 1.88" square exhaust port.
This exhaust port requires specific gaskets.
Our pn# PC5202 gaskets are made of re-useable copper, or if you prefer paper, use our pn# PC5123.
Felpro also offers gaskets that work with our heads as # 1410.
Dimensions: | 24.000x9.000x6.000 |
INTERNATIONAL SHIPPING |
Cylinder Heads & Parts for Sale
Honda acura 2.2 2.2l f22b1 2.3 2.3l f23a1 f23a5 f23a7 exhaust valves set 8 94-02(US $56.96)
2jzge vvt-i cylinder head and intake manifold - is300 2001-05(US $350.00)
Edelbrock valve stem locks machined hardened steel 7 degree 1-groove 11/32" i.d.(US $22.49)
Sbc chevy 76cc 350 383 drilled for 400(US $9.99)
Gm 3.4l 3.4 3.1l 3.1 cylinder head both heads grand am prix century malibu(US $174.99)
Engine expansion plug (dorman #565-030)(US $28.34)
Volkswagen up! (2012) arrives – traditionally.
Sun, 21 Aug 20112012 VW Up - on sale in early 2012 Volkswagen has been trailing the VW up! forever. Well, four years - since Frankfurt 2007.
Tesla Model S starts at $57,400, tops out at $92,400 when sales start in 2012
Wed, 21 Dec 2011Tesla Motors Inc., the U.S. electric-car maker that plans to build a rechargeable sedan in California, said a top-of-the-line version of the Model S will cost as much as $92,400 when it goes on sale in 2012. Tesla released detailed prices, features and options for the Model S sedan Dec.
Full-scale model of 5th Peugeot Design Competition winner revealed in Shanghai
Wed, 22 Apr 2009A life-sized model of Carlos Arturo Torres Tovar's RD concept, for which the 26 year old Columbian designer won the 5th Peugeot Design competition, is on display at the Peugeot stand in Shanghai. The 'RD' concept was chosen via an online internet poll and a competition jury headed by Peugeot's Managing Director, Jean Philippe Collin in September last year. The theme for the 2008 competition was 'Imagine the Peugeot in the worldwide megapolis of tomorrow'.