Find or Sell any Parts for Your Vehicle in USA

New Efi Tunnel Ram Base, Show-polished, For 283-327-350-400 Sb Chevy Motor 4-efi on 2040-parts.com

US $450.00
Location:

Whittier, California, United States

Whittier, California, United States
Brand NEW, Show Polished Tunnel-Ram Intake base w/threaded EFI Bungs Installed,Professionally, Machined, Welded and High-Temp Epoxy Sealed by BDS, with no Welds Showing, for BDS Threaded Fuel Injectors see photos!
Brand:Offenhauser Surface Finish:Professionally Show Polished Manufacturer Part Number:*5921 Dated 08/20/91 Country/Region of Manufacture:United States

This is from a Project I started several years ago, but I never completed! This is a "NEW" Offenhauser Tunnel Ram Base *5921, Dated 08-02-1991, for a 283-327-350-400 SB Chevy Motor. This intake has provisions for the Road-Draft Tube or Oil Filler Tube used on Early SB Chevy V-8 motors, this can be plugged with a Brass Freeze Plug if necessary! The Port Size is for the *1205 and the smaller *1204 Intake Port Configuration! The T-Ram Base has the Threaded Fuel Injector Bungs Machined and Professionally Installed by BDS and these are the threaded Injector Weld-In Bungs, Created and Installed by Blower Drive Service. The bungs are trimmed at the connection to the intake, and do not protrude into the Intake Air-Flow! These threaded injector bungs are Tack-Welded @ 120 Degrees with 1/4" Welds in 3-places to eliminate intake-port distoration and then High-Temp Epoxy Sealed! This eliminates and warping of the intake, and eliminates Re-machine that is normally necessary after welding has been completed! This is not performed in this manor is not by others that offer this type of service! This type of installation was Developed and Perfected by BDS! The Bungs cost $15.00/ea and equal $120.00, the Installation and welding and epoxy work runs $275.00 for eight. BDS has performed many of the 8-Stack EFI Conversions, and does not need to Re-Machine the intake after performing this service! This has been performed by BDS, many times in the EFI Industry. The Show Polishing of this intake cost me over $150.00 Summit sells the T-Ram Base for $369.97, this Totals to $914.97, so I have quite a lot invested in this intake, and this is what you will need to get this done, so am offering that at less than 1/2 Price of what it will take to recreate this intake!

48 States UPS Ground Shipping/Insured

Intake Manifold for Sale

TVR sale latest

Thu, 08 Feb 2007

By Tim Pollard Motor Industry 08 February 2007 04:17 More than 30 parties have expressed an interest in buying the remnants of TVR, the sports car maker which crashed into administration over Christmas - and the factory could move to Asia. Administrator PKF (UK) LLP has spent the past month clarifying the assets of Blackpool Automotive Ltd, the company that ran the Blackpool factory, and it in fact holds several trump cards that could prevent the Russian owner switching production overseas. The sale advert in the Financial Times reveals that Blackpool Automotive controls the TVR trademark in Europe and the US, as well as all the intellectual property rights and tooling for the sports cars.

Bentley Continental Flying Spur Speed Series 51 Review & Road Test (2011) Part 2

Wed, 13 Apr 2011

Bentley Continental Flying Spur Speed on the road A prod on the button yields a turbine-like wail from the starter as it breathes life in to the 12 cylinders. That the background growl of the W12 is audible is a pleasant surprise; Bentley has chosen not to make the Speed experience a silent one. A prod on the throttle is enough to entice the Speed to leave its stationary position with something very close to instant acceleration.

Lamborgini Jota (or nota Jota) Tease 5

Mon, 27 Sep 2010

Lamborghini Paris 2010 Tease 5 Normally, we’d have given up now out of sheer boredom. But sometimes you go past the point when you should have said ‘Can’t be arsed’ and you get to the point where you might as well carry on. That’s where we’re at with the Lamborghini Jota / NotaJota tease which has been going on for months.