New Kse Midget Gen2 50 Power Steering Gear Box Unit,beast,stealth,spike,bullet on 2040-parts.com

You are bidding on a Brand New KSE Gen 2 Steering Gear with Quick Release for Midgets (Part #KSGEN2L-3472).

• Features:
  • Left-hand steering unit
  • 10" Input Shaft
    • Shown as "A" in the diagram below
    • Measurement is made from the steering wheel mounting surface of the quick release hub to the center line of the output shaft.
    • Input shaft length is based upon driver preference; 11" is the most common in Sprint and Silver Crown cars. 10" and 11" are also used in Midgets.
  • 14" Live Tube Output Shaft
    • Shown as "B" in the diagram below
    • Dimension is determined by chassis width, as well as the desired location of the drag link.
    • 14" and 16" are common left side Midget lengths.
    • 16" and 18" are common left side Sprint and Silver Crown lengths. 16" with the wide angle broached pitman arm are used to maximize weight reduction.
  • 50 Servo Valve Effort
    • Shown as "C" in the diagram below
    • The servo valve torsion bar determines the effort required to steer by the driver. This is a driver preference. All KSE gears have the torsion bar size stamped on the web side of the case, next to the serial number.
    • A "20"” is the least effort size, and a "65" requires the most effort.
    • Dirt sprint cars and Silver Crown drivers generally choose the lower efforts (35-40), while Midgets and pavement drivers choose higher efforts (40-50).
  • Includes Pull-type Steering Wheel Quick Release Hub
    • Shown as "D" in the diagram below
• Fits most popular Midget Chassis, including Beast, Stealth, Spike, Bullet, Twister, Triple X, etc.

KSE Racing Products’ GEN 2 steering gear was initially released in 2005 and it helped to revolutionize the open wheel steering system with its integral reservoir and in-board mount design. The GEN 2 quickly took the industry by storm to become the industry’s leading power steering system.

Built-in Reservoir:

The reservoir is built into the live hub tube of the gear. This design eliminates turbulence, aeration, and provides the most cooling of any tank KSE has tested. The easy-fill 2" diameter cap is vented and has a built-in dipstick.

Wing Slider Ports:

Standard on all GEN 2 gears, the wing slider ports are o-ring sealed. Special high-flow #3 o-ring boss to 37-degree JIC #4 fittings are available.

Positive Feel:

The new four-degree valve and 20% faster lead ball screw transfers quicker front wheel feedback to the hydraulic assist to improve front wheel stability. The inboard mount improves top steering gear mount rigidity, which reduces the rotation of the gear box in the chassis when steering.

Consistent Feel:

The new four-degree valve contours the pressure load over a greater range than the previous two-degree valve. This provides a more uniform feel in the steering wheel regardless of the steering load on the front wheels.

Improved Durability:

Solid-model design and structural analysis were utilized to design a casting that is considerably stronger. The cross shaft tooth form is 40% stronger. The inboard mount eliminates the steering gear as a structural member of the chassis.

Less Weight:

The GEN 2 is the lightest steering gear currently on the market! It is comparable to the weight of the KSE Pro Lite gear and is 25% lighter than the previous 1st generation KSE gear.

Simplified Plumbing:

A #10 line from the built-in reservoir to the pump inlet, and a #6 pressure line from the pump to the pressure port is all that is needed. The return to the reservoir is internally ported. The GEN 2 eliminates all external tubes and fittings of the standard gear.

Easier and Cleaner Installation:

The inboard mount makes installation and removal quicker and easier. It also improves leg-room and minimizes throttle linkage issues. The built-in reservoir and internal plumbing eliminate hoses, fittings and a remote-mounted reservoir. The built-in wing slide ports eliminate fittings and hoses— further simplifying installation.

***Does not include the steering wheel shown below***

No "Tight" Spots:

Tight spots are caused by the steering load being greater than the pressure the pump can deliver. Output torque has been increased by 15% relative to pressure. The inboard mount also eliminates binding of the steering gear due to chassis flex.

Value:

The industry-leading GEN 2 is priced comparable to the previous standard KSE gear with a dead-tube reservoir. All-in-all, the outstanding quality, durability, and the extras add up to an amazing value. KSE takes pride in producing the absolute best products at the fairest prices with unmatched service.

You can view and download KSE's installation and start-up guide here

You can browse hundreds of other Sprint Car, Midget, and Mini-Sprint items in our Ebay store.

We also have thousands of other High Performance Parts in our store.

Shipping:

There is no faster shipping on Ebay.  If you pay for the item by 5:00 Eastern, Monday-Friday, we will ship it the same day.  If it's after 5:00 EST, we will ship it the next business day.  If you pay for the item on the weekend, we will ship it out Monday.

Ebay now requires that sellers put a "handling time" on each item and "1 Business Day" is the shortest listed option.  WE DON'T HAVE A HANDLING TIME.  We ship same day in accordance with the paragraph above.  No delays here.  We want you to have the parts as bad as you do. 

Shipping cost will be $29.99 within the continental United States.  If you buy 2 or more of our auctions, shipping will certainly be combined to save you money.

Accepted payment methods:

We accept Paypal. If buyer doesn’t have a Paypal account, he or she can pay with Visa, Mastercard, or Discover through seller’s merchant account.