Find or Sell any Parts for Your Vehicle in USA

New Pioneer Ts-sw841d +1yr Mfg. Waranty Car 8" Shallow Slim 500w Subwoofer 4 Ohm on 2040-parts.com

US $79.95
Location:

McHenry, Illinois, US

McHenry, Illinois, US
Returns Accepted:ReturnsNotAccepted Part Brand:PIONEER TSSW841D CAR 8" SHALLOW SLIM SUBWOOFER Manufacturer Part Number:PIONEER TSSW841D CAR 8" SHALLOW SLIM SUBWOOFER Warranty:Yes UPC:012562807287

Pioneer TS-SW841D Shallow-Mount Subwoofer (New in sealed box): 1-Year Pioneer Warranty

Pioneer's innovative TS-SW841D 8" subwoofer packs a punch that belies its slender cross-section. Its Air Suspension Control System eliminates the need for a conventional spider structure. Instead, a cushion of locked-in air acts like a spring, providing smooth, precise movement of the woofer. This special design keeps the total depth of the sub comfortably under 3", for bold bass in places regular subwoofers can't fit.

The one-piece die-cast aluminum basket sports a radical fin design that provides extra cooling and rock-solid resonance control. Rugged internal parts, a powerful strontium magnet, and a cone-reinforcing aluminum dust cap round out the package. Pair this sub with a special low-profile enclosure from Pioneer to get the most out of this slender powerhouse.

Highlights:

  • 8" 4-ohm shallow subwoofer
  • carbon and glass fiber reinforced IMPP cone with woven-fiber surround
  • Air Suspension Control System eliminates traditional spider structure
  • cast aluminum basket
  • strontium magnet
  • power range: 50-120 watts RMS (500 watts peak power)
  • frequency response: 30-1,500 Hz
  • sensitivity: 85 dB
  • mounting depth: 2-9/16"
  • sealed box volume: 0.15-0.5 cu. ft.
  • ported box volume: 0.15-0.5 cu. ft.
  • Pioneer warranty: 1-year
Product Research:

Features

Shallow Mount Woofer: Pioneer's Shallow-Mount subwoofers are designed to provide wider installation options for a broad range of vehicles. They can be mounted behind or under the seats of many vehicles. The TS-SW841D has interlaced Carbon/Glass fiber reinforced IMPP (Injection Molded Polypropylene) composite cones. This cone design is lightweight and rigid, resulting in clean, powerful bass response.

Air Suspension System: Rather than using a standard spider to control cone movement, Pioneer created an Air Suspension system; using two cones with a sealed air space between them. The air locked between the main and drive cones creates a spring-like effect between them moving in unison. The dual cone structure maintains better linearity, resulting in consistently clear, powerful, wide ranging bass response. The drive cone also deflects air pressure inside the enclosure, which further contributes to the bass output of the small package.

Cast Aluminum Basket: The one-piece cast aluminum basket assembly holds the motor assembly, cone, and magnet structure securely in place. The benefits of this design include reduced internal stress, superior damping, and increased magnetic efficiency.

Surround: The two cones use three-layer, fiber-woven, M-shaped radial surrounds to attach to the basket and form the Air Suspension System. This design keeps the voice coil centered, even under high power, for clear and powerful bass.

Terminals: The spring compression binding post terminals will accept a pin connector, a single banana plug, or bare wire up to 10 gauge.

Specifications

Sealed Box Volume: The sealed box sizes recommended by Pioneer range from 0.15 ft³ to 0.5 ft³; within this range the ideal size is 0.4 ft³.

Vented Box Volume: The vented box sizes recommended by Pioneer range from 0.25ft³ to 0.5 ft³; within this range the ideal size is 0.4 ft³. The ideal port size for a 0.4 ft³ enclosure is 2.5" diameter x 6" long.

Single Reflex Bandpass Volume: The bandpass box sizes recommended by Pioneer range from 0.25 ft³ per chamber to 0.4 ft³ per chamber; within this range the ideal size is 0.35 ft³ per chamber. One 3" diameter x 6" long port should be used in an enclosure with 0.35 ft³ chambers.

Infinite-Baffle Operation: The woofer is also optimized for infinite-baffle operation so that it can be installed in a variety of locations, without the need for a dedicated enclosure.

Features & Specs:

Size8 -inch
Impedance4 ohms
Cone MaterialCarbon Fiber/IMPP
Surround Material3-Layer Woven Fiber
Ideal Sealed Box Volume (cubic feet)0.4
Ideal Ported Box Volume (cubic feet)0.4
Port diameter (inches)2.5
Port length (inches)6
Free-AirYes
Dual Voice CoilNo
Sensitivity85 dB at 1 watt 
Frequency Response30 - 1500 Hz
RMS Power Range (Watts)50-120
Peak Power Handling (Watts)500
Top Mount Depth (inches)2 9/16
Bottom Mount Depth (inches)N/A
Cutout Diameter or Length (inches)7 1/4
Vas (liters)1.892
Fs (Hz)67.5
Qts1.64
Xmax (millimeters)3.5
Parts Warranty1 Year
Labor Warranty1 Year

Skoda VisionD Concept revisited

Fri, 09 Dec 2011

Skoda VisionD - new pictures released For reasons best know to Skoda, they have released a new set of pictures the VisionD Concept from the Geneva Motor Show 2011. The Skoda VisionD Concept arrived at the Geneva Motor Show this year and was said to signal the future design language of Skoda. It was a smoother, less angular look without the current statement face of Skoda.

Rolls Royce Ghost EWB launched +video

Tue, 19 Apr 2011

Rolls Royce Ghost EWB - a Chinese launch Really, you wouldn’t expect Rolls Royce to release something as common as a long wheelbase Ghost, would you? No, this Ghost is an extended wheelbase Ghost – the Rolls Royce Ghost EWB. When we reported back in December that the LWB Ghost was getting close – and the Ghost DHC and Ghost Coupe, for that matter – we’d half expected Rolls Royce might get a shake on and take the Ghost EWB to Geneva.

Ford plans to introduce two-cylinder and three-cylinder engines

Tue, 15 Sep 2009

Ford Motor Co. will introduce its smallest turbocharged engine yet next year, and on the horizon are even tinier engines--including two- and three-cylinder versions, the automaker's powertrain chief said Monday. Barb Samardzich, Ford vice president of powertrain engineering, said two- and three-cylinder engines and engines with displacements of 1.0 liter or below are possible.