Find or Sell any Parts for Your Vehicle in USA

New Suspension & Wilwood Brake Set,currie Rear End,posi-trac Gear,booster,717311 on 2040-parts.com

US $3,799.99
Location:

High Performance Parts, United States

High Performance Parts, United States
Condition:New Manufacturer Part Number:FDM7173X-K11 Brand:Wilwood Engineering, Currie Enterprises

                                                                                           

You are bidding on a Brand New Suspension and Brake Kit for 1971-1973 Ford & Mercury (Part #FDM7173X-K11).

This specific set features Wilwood brakes with Black Calipers.

Fits:

  • 1971-1973 Ford Mustang, all models including Coupe, Fastback, GT, Mach 1, Boss 302, Boss 429, CJ, SCJ, and Shelby
  • 1971-1973 Ford Ranchero
  • 1971-1973 Mercury Comet
  • 1971-1973 Mercury Cougar, all models including XR-7 and Eliminator

Includes:

  • Currie 9-Plus Notch-Back Rear End with 31 Spline Axles (Currie #CE-FDM6466X)
    • Currie Crate Rear Ends are designed to be a bolt-in upgrade
    • 9-Plus notchback heavy duty housing
    • 31 Spline performance axle package
    • Built to the stock overall width (60 7/8") and pinion offset specs
      • 60 7/8" is measured outside-of-axle-flange to outside-of-axle-flange, in other words, where the wheel bolts on to where the wheel bolts on
    • Heavy-duty 2 1/4" wide leaf spring pads are installed in the stock location for an easy bolt-in installation  
    • Housing includes all 3rd member studs installed
    • Axles include:
      • Stock 5 x 4 1/2" wheel bolt pattern
      • Wheel studs installed
      • 1/4" Thick heavy-duty bearing retainer plates
      • Tapered Timken style wheel bearings pressed on
    • The Axle flanges on this rear end are the Big Bearing Ford (New Style), also known as "Torino", which fit the Wilwood brakes perfectly
  • Southwest Speed 9" Ford Rear End Third Member with Posi Trac-Loc (SWS Part #603-2078)
    • This kit comes with a 3.70 ratio gear, which is a good cruising ratio.  We have ratios from 3.50 to 5.00 that can be substituted in.  If you would like a different ratio besides the 3.70, just make sure to request that.
    • 9" Ford case is reconditioned and sold completely assembled with:
      • New 31 Spline Trac-Loc Posi Unit
        • 4 Pin limited slip trac loc
        • Brand new, not rebuilt
        • This is a clutch style posi unit
        • Using this product does require friction modifier in the gear lube
      • New Premium Ring & Pinion
      • New Solid Shim Set
      • New Bearings
      • New Pinion Yoke
      • 3rd Member Gasket
      • Instructions Detailing Proper Break-In Procedure
    • Professionally set up with proper lash
    • Pinion is precision matched to ring gear
    • Pinion yoke is 1310 series "short" yoke; Accepts 1310 series u-joints, which have 1 1/16" outside diameter cups and measure 3 7/32" wide to the outside of the cups
    • Shipped in heavy cardboard box with foam to prevent any damage in shipping
    • **Due to the nature of high performance ring & pinions, some gear noise is a possibility with these 3rd members**
    • In addition to this kit, we have driveshafts that will fit this application in this listing.  We would just need to know what length your specific vehicle requires.
  • Wilwood Disc Brake Kit with Standard Rotors and Black Calipers (Wilwood Part #140-11073 Front & #140-11389 Rear): 
    • Wilwood brake kits consist of specifically engineered & matched groups of components designed to provide superior brake system performance & custom appeal over a wide range of applications.
    • For the Front, Forged Dynalite Pro Series front hub kits offer complete disc brake upgrade solutions for traditional non-ABS spindle applications on American muscle cars, vintage rods, & heavyweight drag cars. Based on the venerable Forged Billet Dynalite caliper, these versatile kits are easily optioned to suit the braking requirements & style preferences for a daily driver, serious competition, or the most discriminating show enthusiast.
    • For the Rear, Dynapro Low-Profile Pro-Series rear disc brake kits provide a complete solution for popular muscle car rear axle.  Forged billet Dynapro Low-Profile four-piston calipers, 11" one-piece hat and rotor assemblies, and high friction pads provide optimized and balanced braking for all types of custom performance street/strip and show machines. The neatly hidden internal shoe system provides a clean installation with superior static holding power for parking
    • These Brake kits require at least 15" diameter wheels
    • Front Brake Kit includes:
      • .810" Thick x 11.00" O.D. Rotors
      • Forged Dynalite 4 Piston Calipers - Black
      • Caliper Mounting Brackets
      • BP-10 Smart Compound Brake Pads
      • Hubs, Bearings, Seals, &
      • All Bolts, Washers, and Shims necessary to install the complete braking system on both front wheels
    • Rear Brake Kit includes:
      • .810" Thick x 11.00" O.D. Rotors with Hats
      • Low-Profile Dynapro 4 Piston Calipers - Black
      • Drum Parking Brake Assemblies with Caliper Mounting Brackets
      • Bearing Retainers
      • BP-10 Smart Compound Brake Pads
      • All Bolts, Washers, and Shims necessary to install the complete braking system on both rear wheels
    • You can view and download the complete assembly instruction booklet for the front brake kit here and for the rear brake kit here
    • This listing includes the Wilwood kit with Black Calipers and 11" Standard Rotors.  We also offer the Wilwood kits with different options, including Black, Red, and Polished calipers, with both standard and drilled/slotted rotors in 3 different sizes.  You can see all of the options below.  Just let us know if you would like to upgrade to one of these other kits:
  • Front & Rear Flexline Kits:
    • Steel braided brake lines, caliper fittings, and chassis fittings to connect the calipers to the hard lines
    • Also includes weld-on line tabs to install on your rear end
  • Rear Hard Line Kit:
    • Steel hard brake line tubing to connect the chassis fittings to the included rubber hose
    • Rubber hose connects those hard lines to the line on the frame
    • Note: Tubing bending is generally necessary for the installation of these lines
    • **The front flexline kit connects to the stock hard lines on your car**
  • Rear Parking Brake Cable Kit:
    • Connects to the Wilwood Parking Brake Assemblies, then comes together to join the stock cable behind the transmission

In Our Ebay Store, we have:

 

Currie Rear End with Axles:

9" Ford 3rd Member:

Wilwood Rear Brake Kit:

Wilwood Front Brake Kit:

We have many other Currie Products, Wilwood Products, and other Mustang Products in our Ebay store.

We also have thousands of other High Performance Parts in our store.

Shipping:

There is no faster shipping on Ebay.  If you pay for the item by 5:00 Eastern, Monday-Friday, we will ship it the same day.  If it's after 5:00 EST, we will ship it the next business day.  If you pay for the item on the weekend, we will ship it out Monday.

Ebay now requires that sellers put a "handling time" on each item and "1 Business Day" is the shortest listed option.  WE DON'T HAVE A HANDLING TIME.  We ship same day in accordance with the paragraph above.  No delays here.  We want you to have the parts as bad as you do. 

Shipping cost will be $199.99 via UPS Ground within the continental United States.  If you buy 2 or more of our auctions, shipping will certainly be combined to save you money.  We will be glad to ship internationally.  Just send me a message for an international shipping quote.

Accepted payment methods:

We accept Paypal. If buyer doesn’t have a Paypal account, he or she can pay with Visa, Mastercard, or Discover through seller’s merchant account.

     
    After purchasing, pay instantly with your credit card through PayPal!
    Pay me securely with any major credit card through PayPal!
    VisaMasterCardDiscoverAmerican ExpresseCheck

    Powered by eBay Turbo Lister
    The free listing tool. List your items fast and easy and manage your active items.

    Citroen DS3 Cabrio Racing IS going in to production

    Mon, 15 Jul 2013

    The Citroen DS3 Cabrio Racing (pictured) is going in to ;imited production Last week Citroen revealed a cabrio version of the DS3 Racing – innovatively named the Citroen DS3 Cabrio Racing – which was a DS3 Racing with the top chopped off and lots of special design cues. The Cabrio Racing had its first outing this weekend at Goodwood – and is heading for a more public reveal at Frankfurt in September – even though Citroen are calling the Cabrio Racing a Concept. But it seems the Cabrio Racing is more than just a concept and is heading for limited production after Citroen confirmed as much to Auto Express over the weekend.

    BMW – Mean, GREEN, Driving Machines

    Fri, 23 Jan 2009

    BMW may be a lot of things. But stupid isn’t one of them. They haven’t stayed at the top of the Premium Car sector for so long without a pretty good idea of what they’re doing.

    Is Jaguar Land Rover about to get in to bed with Chery Automobile in China?

    Wed, 19 Oct 2011

    Jaguar Land Rover to partner with Chery Automobile Following on from yesterday’s report that Jaguar are upping the ante in India with plans to assemble the Jaguar XF and Range Rover Evoque in Tata’s back garden, we now hear that JLR has agreed a deal with Chery Automotive in China for a joint venture. We reported back in February that sources in China were saying that the most likely partner for Jaguar Land Rover would be Chery Automobile, and reports from China Daily say that things have moved on since February and JLR and Chery have now got as far as seeking government approval for a joint venture. When we had the news back in February about a possible JLR/Chery deal, we asked Jaguar about the reports.