Find or Sell any Parts for Your Vehicle in USA

New Suspension & Wilwood Brake Set,currie Rear End,posi-trac Gear,booster,717312 on 2040-parts.com

US $3,999.99
Location:

High Performance Parts, United States

High Performance Parts, United States
Condition:New Manufacturer Part Number:FDM7173X-K12 Brand:Wilwood Engineering, Currie Enterprises

                                                                                           

You are bidding on a Brand New Suspension and Brake Kit for 1971-1973 Ford & Mercury (Part #FDM7173X-K12).

This specific set features Wilwood brakes with Red Calipers.

Fits:

  • 1971-1973 Ford Mustang, all models including Coupe, Fastback, GT, Mach 1, Boss 302, Boss 429, CJ, SCJ, and Shelby
  • 1971-1973 Ford Ranchero
  • 1971-1973 Mercury Comet
  • 1971-1973 Mercury Cougar, all models including XR-7 and Eliminator

Includes:

  • Currie 9-Plus Notch-Back Rear End with 31 Spline Axles (Currie #CE-FDM6466X)
    • Currie Crate Rear Ends are designed to be a bolt-in upgrade
    • 9-Plus notchback heavy duty housing
    • 31 Spline performance axle package
    • Built to the stock overall width (60 7/8") and pinion offset specs
      • 60 7/8" is measured outside-of-axle-flange to outside-of-axle-flange, in other words, where the wheel bolts on to where the wheel bolts on
    • Heavy-duty 2 1/4" wide leaf spring pads are installed in the stock location for an easy bolt-in installation  
    • Housing includes all 3rd member studs installed
    • Axles include:
      • Stock 5 x 4 1/2" wheel bolt pattern
      • Wheel studs installed
      • 1/4" Thick heavy-duty bearing retainer plates
      • Tapered Timken style wheel bearings pressed on
    • The Axle flanges on this rear end are the Big Bearing Ford (New Style), also known as "Torino", which fit the Wilwood brakes perfectly
  • Southwest Speed 9" Ford Rear End Third Member with Posi Trac-Loc (SWS Part #603-2078)
    • This kit comes with a 3.70 ratio gear, which is a good cruising ratio.  We have ratios from 3.50 to 5.00 that can be substituted in.  If you would like a different ratio besides the 3.70, just make sure to request that.
    • 9" Ford case is reconditioned and sold completely assembled with:
      • New 31 Spline Trac-Loc Posi Unit
        • 4 Pin limited slip trac loc
        • Brand new, not rebuilt
        • This is a clutch style posi unit
        • Using this product does require friction modifier in the gear lube
      • New Premium Ring & Pinion
      • New Solid Shim Set
      • New Bearings
      • New Pinion Yoke
      • 3rd Member Gasket
      • Instructions Detailing Proper Break-In Procedure
    • Professionally set up with proper lash
    • Pinion is precision matched to ring gear
    • Pinion yoke is 1310 series "short" yoke; Accepts 1310 series u-joints, which have 1 1/16" outside diameter cups and measure 3 7/32" wide to the outside of the cups
    • Shipped in heavy cardboard box with foam to prevent any damage in shipping
    • **Due to the nature of high performance ring & pinions, some gear noise is a possibility with these 3rd members**
    • In addition to this kit, we have driveshafts that will fit this application in this listing.  We would just need to know what length your specific vehicle requires.
  • Wilwood Disc Brake Kit with Standard Rotors and Red Calipers (Wilwood Part #140-11073-R Front & #140-11389-R Rear): 
    • Wilwood brake kits consist of specifically engineered & matched groups of components designed to provide superior brake system performance & custom appeal over a wide range of applications.
    • For the Front, Forged Dynalite Pro Series front hub kits offer complete disc brake upgrade solutions for traditional non-ABS spindle applications on American muscle cars, vintage rods, & heavyweight drag cars. Based on the venerable Forged Billet Dynalite caliper, these versatile kits are easily optioned to suit the braking requirements & style preferences for a daily driver, serious competition, or the most discriminating show enthusiast.
    • For the Rear, Dynapro Low-Profile Pro-Series rear disc brake kits provide a complete solution for popular muscle car rear axle.  Forged billet Dynapro Low-Profile four-piston calipers, 11" one-piece hat and rotor assemblies, and high friction pads provide optimized and balanced braking for all types of custom performance street/strip and show machines. The neatly hidden internal shoe system provides a clean installation with superior static holding power for parking
    • These Brake kits require at least 15" diameter wheels
    • Front Brake Kit includes:
      • .810" Thick x 11.00" O.D. Rotors
      • Forged Dynalite 4 Piston Calipers - Red
      • Caliper Mounting Brackets
      • BP-10 Smart Compound Brake Pads
      • Hubs, Bearings, Seals, &
      • All Bolts, Washers, and Shims necessary to install the complete braking system on both front wheels
    • Rear Brake Kit includes:
      • .810" Thick x 11.00" O.D. Rotors with Hats
      • Low-Profile Dynapro 4 Piston Calipers - Red
      • Drum Parking Brake Assemblies with Caliper Mounting Brackets
      • Bearing Retainers
      • BP-10 Smart Compound Brake Pads
      • All Bolts, Washers, and Shims necessary to install the complete braking system on both rear wheels
    • You can view and download the complete assembly instruction booklet for the front brake kit here and for the rear brake kit here
    • This listing includes the Wilwood kit with Red Calipers and 11" Standard Rotors.  We also offer the Wilwood kits with different options, including Black, Red, and Polished calipers, with both standard and drilled/slotted rotors in 3 different sizes.  You can see all of the options below.  Just let us know if you would like to upgrade to one of these other kits:
  • Front & Rear Flexline Kits:
    • Steel braided brake lines, caliper fittings, and chassis fittings to connect the calipers to the hard lines
    • Also includes weld-on line tabs to install on your rear end
  • Rear Hard Line Kit:
    • Steel hard brake line tubing to connect the chassis fittings to the included rubber hose
    • Rubber hose connects those hard lines to the line on the frame
    • Note: Tubing bending is generally necessary for the installation of these lines
    • **The front flexline kit connects to the stock hard lines on your car**
  • Rear Parking Brake Cable Kit:
    • Connects to the Wilwood Parking Brake Assemblies, then comes together to join the stock cable behind the transmission

In Our Ebay Store, we have:

 

Currie Rear End with Axles:

9" Ford 3rd Member:

Wilwood Rear Brake Kit:

Wilwood Front Brake Kit:

We have many other Currie Products, Wilwood Products, and other Mustang Products in our Ebay store.

We also have thousands of other High Performance Parts in our store.

Shipping:

There is no faster shipping on Ebay.  If you pay for the item by 5:00 Eastern, Monday-Friday, we will ship it the same day.  If it's after 5:00 EST, we will ship it the next business day.  If you pay for the item on the weekend, we will ship it out Monday.

Ebay now requires that sellers put a "handling time" on each item and "1 Business Day" is the shortest listed option.  WE DON'T HAVE A HANDLING TIME.  We ship same day in accordance with the paragraph above.  No delays here.  We want you to have the parts as bad as you do. 

Shipping cost will be $199.99 via UPS Ground within the continental United States.  If you buy 2 or more of our auctions, shipping will certainly be combined to save you money.  We will be glad to ship internationally.  Just send me a message for an international shipping quote.

Accepted payment methods:

We accept Paypal. If buyer doesn’t have a Paypal account, he or she can pay with Visa, Mastercard, or Discover through seller’s merchant account.

     
    After purchasing, pay instantly with your credit card through PayPal!
    Pay me securely with any major credit card through PayPal!
    VisaMasterCardDiscoverAmerican ExpresseCheck

    Powered by eBay Turbo Lister
    The free listing tool. List your items fast and easy and manage your active items.

    Ex-TVR chairman Peter Wheeler (1944-2009)

    Fri, 12 Jun 2009

    By Peter Adams Motor Industry 12 June 2009 11:50 Peter Wheeler, the chairman of TVR from 1980 to 2004, has died. Wheeler was in charge of TVR during some of the company’s finest modern years, launching lightweight and powerful rear-wheel drive Blackpool-built sports car including the Chimaera and Griffith, and the Cerbera, Tuscan, Tamora and Sagaris with TVR's own engine. Wheeler passed away during the night on Thursday 11 June after a short illness.

    Ferrari 612 Scaglietti 60th Anniversary (2007): first official pictures

    Tue, 30 Jan 2007

    By Jack Carfrae First Official Pictures 30 January 2007 11:35 Ferrari 612 Scaglietti 60th Anniversary: the lowdown This week marks the beginning of Ferrari’s extravagant 60th anniversary celebrations – and they’re led by that rarest of things: a Ferrari special edition. Between kicking off a cross-continental marathon and announcing a Ferrari theme park, Maranello has unveiled plans to produce a limited run of 60 unique versions of the 612 Scaglietti. Each car will commemorate the 60 most significant events in the history of the company, ranging from F1 World Championship wins to the launch of milestone models such as the F40 and Enzo.

    Next BMW 7-series previewed in Vision Future Luxury concept

    Sat, 19 Apr 2014

    BMW has previewed key exterior styling elements, contemporary interior design touches, lightweight carbon fiber construction and innovative lighting systems to be incorporated on next year's sixth-generation 7-series with the unveiling of an arresting new concept car that goes under the name Vision Future Luxury. Revealed at the Beijing auto show, the big new sedan is described as a showcase for future BMW models. But while initial speculation suggested the Vision Future Luxury pointed at a possible 9-series flagship model to be installed at the top of the German car maker's lineup, BMW officials have confirmed the new concept was created more specifically as a pointer to the next 7-series, which is planned to head into North American showrooms late next year.