Nissan Navara Np300 Lift Kit 4"inch Coil - Shackle Double Cab 2015-2017 on 2040-parts.com

Lift Kit 4” for Nissan Navara NP300 Double Cab 2015-2017

Nissan NP300, Renault Alaskan ,Mercedes-Benz X-Class

Renault’s first entry into the lightweight pick-up truck sector. The Alaskan will go on sale in South America later this year before being considered for other markets, including the UK

Note: 2018 model-year Mercedes truck will debut at Paris motor show this fall ,Mercedes-Benz will preview its upcoming pickup truck at the Paris motor show this fall, Auto Express reports. The pickup, which will likely be badged X-Class, is expected to go on sale in the fall of 2017 as a 2018 model. The newest addition to Stuttgart's light-truck lineup will share most of its mechanicals with the 2016 Nissan Navara pickup, though the powerplants are expected to be Mercedes' own. Expect four- and six-cylinder engines under the hood, along with a gas-electric hybrid that will arrive a little later in the product cycle.

TRUE SUSPENSION LIFT KIT  

4"  inches

GAIN REAL GROUND CLEARANCE / 4" FRONT + 4" -4.5 BACK

DAYTONA-CPS

3" (= approx. 75mm) FRONT

+

4"- 4.5” (= approx. 100mm to 130mm) REAR adjustable

All STEEL Construction – SAFETY FIRST

World Wide Shipping byTNT or  DHL Express is available for all KITS

To all Country’s

If your country is NOT listed just contact us for s Express delivery price by TNT or DHL 3-7 days in most areas

COMBO SUSPENSION LIFT KIT

Nissan Navara NP300 Double Cab 2015-2017

Lifts your Nissan Navara Double Cab to allow for more ground clearance and bigger tires!

Our kits provide you with all the necessary parts to lift your truck! This is the best high quality lift kit for any truck enthusiast by using existing suspension components rather than cutting and welding costing you hundreds of dollars on top of the kit itself.

Pls. DO NOT CONFUSE OUR DAYTONA-CPS COMBO SUSPENSION LIFT KITS WITH CHEAP BODY LIFT KITS

Body lift kits only lift the body off the frame of a car and therefore offer no performance advantage other than tire clearance.

Body lifts kits lead to the following problems:

Ugly exposure of trailer hitches, ugly gaps between trucks frame and cab/bed, need to extend/adjust fuel filler hoses, steering column, engine cooling fan air guiding parts, etc.

Our DAYTONA-CPS suspension lift kit offers you clear performance advantages

by spacing down your vehicles factory suspension.

This way you will get:

- Enhanced looks

- Increased tire clearance

enabling you to mount lager wheels/tires

- Increased ground clearance

resulting in improved off-road capabilities

Contents of our DAYTONA-CPS COMBO SUSPENSION LIFT KIT:

- 2 x coil spacers 

CNC-manufactured – for 3” front lift**

Made from STEEL- NOT Aluminum as there are many CHINA made Aluminum COILS made from standard grade aluminum which cracks and breaks under Road Conditions – Some say T-6 Aluminum [ Strong Grade] but it is NOT as the Cheap CHINA price reflects this reality ,some are anodized to make it look special ! its NOT ! . Ours is made of STEEL  like your Truck Frame  [ heavy and more cost to ship but its SAFETY design - ] to meet the manufactures Factory Safety TEST specifications for drive train and steering conditions . - Is your life worth the Cheap China Knockoff ?  Sure its cheaper to ship Aluminum but at your family’s LIFE expense in the savings . There is never an excuse for cheapness when SAFETY is involved.

- 2 x 9-10" Rear Shackle Lift Leveler

manufactured from heavy duty S235JR construction steel with  antirust coating

 - All required nuts and fasteners

- Detailed English PDF Picture Diagram installation instructions by email .

** IMPORTANT NOTE: The lift / coil spacer thickness ratio is not 1:1. This means that the lift achieved lift height is much greater than the actual thickness of the coil spacers. The reason for this is that the lower control arm compounds the amount of lift due to its angle and length.  Front 3" represents lift amount, NOT the spacer thickness. This lift kit is designed to give you an overall lift of up to approximately 3 inches (75mm) front / 3-3.5 inches 75-80mm back).  This is the recommended maximum which you can lift your vehicle without affecting your vehicles driving characteristics in a negative way. Shackle lifts are typically measured in halves. Meaning a 7-8" taller shackle produces 3 to 3.5" of actual lift is adjustable . This is because only one end of the spring is being lifted. Shackles do change steering caster and drive-line angles, which is why moderation is recommended on this lift

Our Daytona Full Lift Kits are precision engineered to lift and or level your truck. Our offerings include various size combinations for the front and rear so you can change or customize your truck to the required ride height. If there’s something you require, please message us and we’ll be happy to put an offer together  for you!

This is shipped DHL or TNT EXPRESS  International AIR 3-7 BUSINESS Days depending on your area

 Third generation (D23)

2015 -2017 Nissan NP300 Navara (D23) ST 4-door utility (17841084089).jpg

Also called   Nissan NP300 Renault Alaskan ,Mercedes-Benz X-Class

Production  started July 2014– Assembly     Thailand: Samut Prakan (2014–present) Spain (Nissan Motor Iberica, S.A. (2015–present) Argentina Santa Isabel (2017–)

Front-engine, rear-wheel drive / Four-wheel drive

On 11 June 2014, Nissan unveiled the third generation Navara (now known as the NP300 Navara) and is codenamed D23. The D23 will not be available in the US. Series production will commence at a new $360 million plant in Samut Prakan, Thailand in July 2014 and deliveries began in August for the 2015 up models. A Nissan North America spokesperson, Dan Bedore, has stated that the D23 is not indicative of a D40 Frontier replacement.[22][23][24][25] The European model will feature a 2.3-litre engine from the Nissan NV400.[26]

Stock Is Kept in Canada, Thailand and some Europe Locations subject to availability, Shipping location may vary due to STOCK availability, but we will always ship in 1 business days and Delivery is AIR TNT or DHL -3-7 days as noted. Some country’s will charge Import duty on items entry to country.

All Returns are paid for by BUYER