Find or Sell any Parts for Your Vehicle in USA

Nos 1978 89 For Lincoln Mercury W Valve Push Rod D8az-6565-a (2) on 2040-parts.com

US $9.99
Location:

Huntsville, Missouri, United States

Huntsville, Missouri, United States
Condition:New other (see details) Brand:Ford Warranty:No Manufacturer Part Number:D8AZ-6565-A UPC:Does Not Apply







NOS 1978 89 For Lincoln Mercury W Valve Push Rod D8AZ-6565-A (2)

This listing is for a package of two (2) NOS push rods for the 1978 through 1989 Ford, Lincoln and Mercury with the 351W (using stamped steel rocker arms). Part number D8AZ-6565-A. These are loose dealer stock and have some light to moderate cosmetic oxidation. Use as required. Push rods you will receive will be similar to/or the ones pictured. Picture shown is representative of the push rods themselves, not the packaging. They may come in a box, in a package, wrapped up with tape or without packaging of any sort. Regardless, the push rods will be the correct part number and application as listed. These have been sitting for DECADES and as such, have been shelved, packaged, unpacked, and re-packaged by various dealers during inventory control. Go ORIGINAL Ford!! If you need a replacement or an extra, here it is.

I am currently listing many small, hard to find, NOS Ford, Lincoln, and Mercury parts. I do not have EVERY parts book Ford put out, but I do have most and will make every attempt to accurately describe the item, it's application(s), and the years it was in service.

All my listings are for NOS items unless otherwise specified in the item description. Please keep in mind that while these are NOS parts manufactured by or for Ford, there may be something that is unforeseen in quality or present due to storage, such as discoloration, shelf and box rubs, light scuffing, residues, etc. Most of these parts have been sitting on a dealership shelf and are between 20 and 50 years old. I don't sell junk, broken, or obviously unusable parts. Those are for the trash. If a part is missing, or needs some attention due to chrome spotting, shelf grime, or surface rust, I will note it. These items are often one of a kind and obsolete from Ford. As such, all items are sold as is. Also, it's hard for me to visualize where on a car or truck each and every part may go since I list thousands of different parts from 1932 grill trim to the seat back bushings on a 1992 F-250. The buyer will have to rely on either shop experience, knowledge of their car or truck, and a visual comparison with the photo(s) in conjunction with what I have described, to make a determination as to exact fit or application as it pertains to their vehicle.

Please e-mail me if you have any questions. I am always glad to provide more photos if you feel they will help you make a good decision. I will have other NOS and used items up for sale periodically so bookmark my Seller's page and check back every few days. I also have a Store with hundreds of items you may find of use.

Thanks for looking and good luck!!

PAYMENT

I Accept PayPal

I accept PayPal or any other approved payment method per eBay. Payment requested within 10 days of listing end.


SHIPPING

Shipping is FREE in the Continental US unless otherwise specified in the listing details

Unless specified in the auction payment/shipping details, shipping in the Continental United States is FREE! If shipping is specified, buyer to pay ACTUAL (no handling or hidden charges) shipping via USPS mail or UPS. Shipping will be quoted at the most economical manner unless buyer wants faster service. If buyer has multiple purchases please wait for a combined shipping/item invoice. Multiple items being shipped will be shipped at the most economical combined method possible, regardless of what the shipping time/method is listed for any single item. In other words, if an item is listed for Expedited First Class, but you also purchase a UPS ground item, ALL items will be shipped UPS ground.

Also, if shipping is specified, it is for shipping in the US and territories only. International and our northern neighbors will need to wait for a quote as I will give shipping costs and options after the auction based on your address. Most small parts that weigh less than a pound will be shipped First Class in a padded envelope. NOTE: Any item over $250.00 will require a CONFIRMED address and a signature verification.



LIABILITY

I am not responsible for non-delivery by the Post Office or UPS due to incorrect address, non-confirmed addresses, or mishandled mail by the carrier.


 

FEEDBACK

Feedback will be left upon payment of item. Thank you for your prompt payment! Once you receive your item and everything is satisfactory to you, please return feedback in kind. If you have any questions, please contact me.


DON’T MISS YOUR PARTS BECAUSE YOU ARE AWAY AT WORK OR OUT OF TOWN!! Use eSnipe to set and forget.





Rocker Arms & Parts for Sale

New Longbridge production line

Thu, 31 May 2007

By Tim Pollard Motor Industry 31 May 2007 10:10 Reborn MG opens its doors at Longbridge Yesterday marked the latest chapter in one of the genuine rollercoaster stories of our times: the rise and fall – and now yet another recovery – of car production at Longbridge, the spiritual home of some of the most famous nameplates in British car manufacturing. This time it’s the rebirth of MG, now in Chinese hands and back from a near-death experience since MG Rover collapsed in April 2005. Nanjing Automobile Corporation (NAC) is the oldest car maker in China and paid £50 million to snap up the MG brand and manufacturing rights, but can it really stand a chance with its new English project?  The Chinese manufacturer is reviving the MG brand and, in Europe, the first model on sale will be the revised TF roadster on sale around September 2007.

Video: Lexus LF-CC concept explained by its designers

Fri, 12 Oct 2012

We're big fans of the Lexus LF-CC concept after seeing it in Paris. It's not what you would call traditionally beautiful but it's incredibly complex, engagingly off-beat and, most importantly, shows – along with the LF-LC concept – that Lexus may finally have a recipe for distinctive and consistent design. Here Lexus Design's General Manager Yo Hiruta discusses the continuing evolution of the brand in an interview with the Lexus Blog.

Audi RS6 Avant ‘Plus’ planned with 600bhp

Tue, 29 Jan 2013

Audi are planning a ‘Plus’ model of the new RS6 Avant which will come with around 600bhp and be a full production model. Just as they have with the launch of the TT RS Plus, Audi are planning to give the new RS6 Avant even more power than it already enjoys in an RS6 Avant Plus model, and it won’t be a limited edition model but a full production option. Talking to Car Magazine, Stephan Reil, Audi Quattri Division boss, said that Audi were planning a range of RS Plus models which could get not just a performance boost but less weight too.