Oem Fuel Injectors 1997-1998 Jeep Tj Sport 4.0l Set Of 6 *asnu Reconditioned* on 2040-parts.com
Orlando, Florida, US
Price is for a set of 6 reconditioned fuel injectors!
Professionally Reconditioned and Flow Matched using the Industry Leading ASNU Machine!
YOU WILL GAIN PERFORMANCE AND GAS MILEAGE WITH A FLOW MATCHED SET OF OUR INJECTORS, EVEN IF YOUR FUEL INJECTORS ARE RELATIVELY NEW, FUEL DEPOSITS AND CARBON BUILD UP CAN BEGIN TO AFFECT FUEL INJECTOR'S PERFORMANCE IN AS LITTLE AS 3 - 4 YEARS
These are factory Siemens Deka fuel injectors, part number 53030778.
NO MODIFICATIONS ARE REQUIRED!
These injectors are a direct "plug-and-play" product.
FOR LESS THAN THE PRICE OF CHEAP AFTERMARKET UNITS, WHY NOT USE FACTORY PARTS?
THIS SET OF INJECTORS WILL FIT THE FOLLOWING APPLICATIONS ;
1996 - 1998 | Jeep | Wrangler ALL TRIMS | 4.0L I6 |
---|---|---|---|
1997 - 1998 | Jeep | TJ ALL TRIMS | 4.0L I6 |
1996 - 1998 | Jeep | Cherokee ALL TRIMS | 4.0L I6 |
1996 - 1998 | Jeep | Grand Cherokee ALL TRIMS | 4.0L I6 |
THESE ARE ORIGINAL SIEMENS DEKA INJECTORS , NOT CHEAP AFTERMARKET UNITS !
All of our injectors are reconditioned using a state of the art process with the industry leading ASNU machine!
Our injectors are rebuilt through the following process ;
1. Visual inspection for any physical damage that would render the injector inoperable
3. Any dirt, grease and paint is removed from the outside of each injector
2. All soft parts are removed ( o-rings, filters, caps etc… ) YES THE FILTERS “INSIDE EACH INJECTOR” are removed !
4. All injectors are submerged in a cleansing bath under “ULTRASONIC VIBRATION” This powerful vibration with the presence of the concentrated cleaning solution breaks down all deposits and sludge built up inside each injector. The injectors are pulsed open and closed rapidly during this process to help remove contaminants.
5. All injectors are then FLOWED BACKWARDS under high pressure to flush out any remaining contaminants6. All injectors are flowed and we look for a good evenly distributed spray pattern and proper electronic operation and current draw, along with a high pressure leak test.
7. All injectors are grouped in flow matched sets within 1% variance ( factory allows a variance of usually 3%-5% )
7. All metal bodied injectors are clear coated or repainted for that “like new” look.
8. All o-rings caps and filters are replaced and the injectors are then packaged.
All of our injectors come with a 100% satisfaction guarantee, if you are unhappy for any reason we will make EVERY effort to resolve the situation. We have spent a substantial amount of time to perform research and study on which injectors work properly in which applications, and we assure you that the injectors you receive will work flawlessly on the vehicles in the compatibility list. If you are using them on ANY other type of application other than described in the ad, please assume responsibility for proper fitment and application, or ASK us prior to purchasing ! We would be glad to answer any questions you have. All warranty issues will be resolved by exchange, refunds ONLY IF we no longer have the correct units available for exchange. Please contact us and give us the opportunity to make you happy prior to leaving feedback !
All of our shipping is done through priority mail, or express mail. Priority mail is FREE to ANYWHERE in the United States and territories thereof, $20.00 to Canada, and $30.00 anywhere else in the world. ALL EXPRESS MAIL ORDERS PLEASE CONTACT US PRIOR TO PURCHASING SO THAT WE CAN MAKE SURE WE ARE ABLE TO SHIP IMMEDIATELY TO AVOID ANY DELAYS !!! If we are able to ship express mail the price for doing so is $15 within the USA, $35 to Canada, and $50 anywhere else worldwide.
THERE IS NO CORE CHARGE OR ANY OTHER HIDDEN FEE’S OR CHARGES ON ANY OF OUR SETS!
IF YOU HAVE INJECTORS THAT NEED TO BE SERVICED PLEASE LET US KNOW AND WE CAN RUN AN EBAY ADD OFFERING THE RECONDITIONING SERVICE TO YOU ALONG WITH OUR WARRANTY.
DO YOURSELF A FAVOR, DON’T BUY SOME CHEAP USED SET OF INJECTORS OFF EBAY FOR YOUR VEHICLE, THEY ARE USED INJECTORS AND WERE MOST LIKELY REMOVED FOR A REASON…… AND SOME SELLERS SELL INJECTORS THAT ARE “USED BUT WE TEST THEM” ….. HOW ? ON A VEHICLE ? WITHOUT THE PROPER EQUIPMENT THAT’S THE ONLY WAY TO TEST THEM, AND THEY MAY BE WORKING, BUT THEY ARE NOT AT 100% CONDITION. DON’T FORGET, FLOW MATCHED INJECTORS AND “PROPERLY” WORKING INJECTORS WILL HELP YOUR VEHICLE ACHIEVE OPTIMAL GAS MILEAGE AND PERFORMANCE, IF YOU HAVE ANY QUESTIONS AT ALL PLEASE EMAIL US !!!
Fuel Injectors for Sale
- 4age 20v silvertop injectors(US $45.00)
- Fj144 set of 4 new fuel injector nissan, stanza,axxess,240 sx, 2.4l,4 cyl (89-95(US $119.75)
- Ford 4.6l mustang engine fuel rail w/injectors (f55e-a2e) (ggg-4) #f24568(US $65.00)
- 2001 2002 chrysler pt cruiser 2.4 liter fuel injector o rings (US $2.99)
- Airtex 4j1007 fuel inj throttle valve-throttle air bypass valve(US $59.87)
- Airtex 1g1013 fuel injector seal kit(US $9.69)
BMW X7 confirmed – but will it take on the Range Rover?
Mon, 31 Mar 2014BMW today confirmed it will produce an all-new X7 model at its Spartanburg, US plant – reinforcing the American factory’s position as BMW’s largest production facility in the world. The new X7 is expected to be a large seven-seat range-topper that will appeal to the US market; it will probably be a rival to the Mercedes-Benz GL – and thus potentially be a premium alternative to the luxury Range Rover. BMW X4 revealed BMW X5 Plug-In Hybrid review (2014 onwards) BMW hasn’t confirmed anything other than the fact it will be ‘larger’ than the X5 and X6.
Classic Toyota bus back in service
Thu, 20 Feb 2014TOYOTA has restored one of its classic buses and is now using it again to transport staff around its factory in Japan. The 1969 Toyota Coaster looks better than new after a full rebuild by workers at the company’s HQ. They had to scour the shelves of warehouses to find unused original parts to help bring back the classic bus to full health.
Autodesk European Automotive Days 2008
Tue, 28 Oct 2008The 2008 Autodesk European Automotive Days conference was held last week in Munich, bringing together 200 automotive design and visualization experts. Autodesk presented their strategy and vision for industrial design, with an emphasis on 'digital prototyping', where even at the concept stage the digital model is treated not just as a set of surfaces, but is integrated within the engineering process as as a functional digital prototype, with the aim to eventually replace physical models entirely. There was also a recognition that traditional techniques continue to have an important place alongside digital workflows, as the workflows and technologies continue to evolve.