Find or Sell any Parts for Your Vehicle in USA

Oem Fuel Injectors 2001 Ford Mustang Svt Cobra 4.6l Dohc V8 *asnu Rebuilt* Bosch on 2040-parts.com

US $159.99
Location:

Orlando, Florida, US

Orlando, Florida, US
Item must be returned within:30 Days Refund will be given as:Money back or exchange (buyer's choice) Return shipping will be paid by:Buyer Returns Accepted:Returns Accepted Return policy details: Restocking Fee:No Manufacturer Part Number:XR3E-C5B Other Part Number:0280155865 Warranty:Yes Part Brand:BOSCH

Untitled Document

Price is for a set of 8 reconditioned fuel injectors!


Professionally Reconditioned and Flow Matched using the Industry Leading ASNU Machine!


YOU WILL GAIN PERFORMANCE AND GAS MILEAGE WITH A FLOW MATCHED SET OF OUR INJECTORS, EVEN IF YOUR FUEL INJECTORS ARE RELATIVELY NEW, FUEL DEPOSITS AND CARBON BUILD UP CAN BEGIN TO AFFECT FUEL INJECTOR'S PERFORMANCE IN AS LITTLE AS 3 - 4 YEARS

 

 photo IMG_7769_zps795248b2.jpg



These are professionally reconditioned O.E.M. fuel injectors.

 

NO MODIFICATIONS ARE REQUIRED!

These injectors are a direct "plug-and-play" product.

 

FOR LESS THAN THE PRICE OF CHEAP AFTERMARKET UNITS, WHY NOT USE FACTORY PARTS?

  

THIS SET OF INJECTORS WILL FIT THE FOLLOWING APPLICATIONS :

 
1999 Ford Mustang SVT Cobra 4.6L DOHC V8
2001 Ford Mustang SVT Cobra 4.6L DOHC V8
2003-2004 Ford Mustang Mach I 4.6L DOHC V8


Factory Ford part numbers these injectors will replace:

XR3E-C5B

XR3Z-CB


THESE ARE ORIGINAL BOSCH INJECTORS , NOT CHEAP AFTERMARKET UNITS !

All of our injectors are reconditioned using a state of the art process with the industry leading ASNU machine!

 photo IMG_7762_zpsbab3b2e6.jpg
 photo IMG_7765_zps860240b6.jpg



Our injectors are rebuilt through the following process ;

1. Visual inspection for any physical damage that would render the injector inoperable

3. Any dirt, grease and paint is removed from the outside of each injector

2. All soft parts are removed ( o-rings, filters, caps etc… ) YES THE FILTERS “INSIDE EACH INJECTOR” are removed !  

4. All injectors are submerged in a cleansing bath under “ULTRASONIC VIBRATION” This powerful vibration with the presence of the concentrated cleaning solution breaks down all deposits and sludge built up inside each injector. The injectors are pulsed open and closed rapidly during this process to help remove contaminants.

5. All injectors are then FLOWED BACKWARDS under high pressure to flush out any remaining contaminants

6. All injectors are flowed and we look for a good evenly distributed spray pattern and proper electronic operation and current draw, along with a high pressure leak test.

7. All injectors are grouped in flow matched sets within 1% variance ( factory allows a variance of usually 3%-5% )

7. All metal bodied injectors are clear coated or repainted for that “like new” look.

8. All o-rings caps and filters are replaced and the injectors are then packaged.

 

All of our injectors come with a 100% satisfaction guarantee, if you are unhappy for any reason we will make EVERY effort to resolve the situation. We have spent a substantial amount of time to perform research and study on which injectors work properly in which applications, and we assure you that the injectors you receive will work flawlessly on the vehicles in the compatibility list. If you are using them on ANY other type of application other than described in the ad, please assume responsibility for proper fitment and application, or ASK us prior to purchasing ! We would be glad to answer any questions you have. All warranty issues will be resolved by exchange, refunds ONLY IF we no longer have the correct units available for exchange. Please contact us and give us the opportunity to make you happy prior to leaving feedback !

All of our shipping is done through priority mail, or express mail. Priority mail is FREE to ANYWHERE in the United States and territories thereof, $20.00 to Canada, and $30.00 anywhere else in the world. ALL EXPRESS MAIL ORDERS PLEASE CONTACT US PRIOR TO PURCHASING SO THAT WE CAN MAKE SURE WE ARE ABLE TO SHIP IMMEDIATELY TO AVOID ANY DELAYS !!! If we are able to ship express mail the price for doing so is $15 within the USA, $35 to Canada, and $50 anywhere else worldwide.

THERE IS NO CORE CHARGE OR ANY OTHER HIDDEN FEE’S OR CHARGES ON ANY OF OUR SETS!
IF YOU HAVE INJECTORS THAT NEED TO BE SERVICED PLEASE LET US KNOW AND WE CAN RUN AN EBAY ADD OFFERING THE RECONDITIONING SERVICE TO YOU ALONG WITH OUR WARRANTY.

DO YOURSELF A FAVOR, DON’T BUY SOME CHEAP USED SET OF INJECTORS OFF EBAY FOR YOUR VEHICLE, THEY ARE USED INJECTORS AND WERE MOST LIKELY REMOVED FOR A REASON…… AND SOME SELLERS SELL INJECTORS THAT ARE “USED BUT WE TEST THEM” ….. HOW ? ON A VEHICLE ? WITHOUT THE PROPER EQUIPMENT THAT’S THE ONLY WAY TO TEST THEM, AND THEY MAY BE WORKING, BUT THEY ARE NOT AT 100% CONDITION. DON’T FORGET, FLOW MATCHED INJECTORS AND “PROPERLY” WORKING INJECTORS WILL HELP YOUR VEHICLE ACHIEVE OPTIMAL GAS MILEAGE AND PERFORMANCE, IF YOU HAVE ANY QUESTIONS AT ALL PLEASE EMAIL US !!!

 photo IMG_7768_zpsc58bdd56.jpg  photo IMG_7770_zps0beb54a5.jpg  photo IMG_7773_zps8c4b2633.jpg  photo IMG_7774_zps54103e11.jpg  photo IMG_7775_zps8a6412b9.jpg

Fuel Injectors for Sale

Maserati GS Zagato

Fri, 20 Apr 2007

This is a the one-off Maserati GS Zagato commissioned by the entrepreneur Paolo Boffi and due for its public debut at the Concours d'Elegance at the Villa d'Este, Italy on the 20th April, a year after the debut of the Zagato-designed Ferrari 575GTZ. This Zagato design is based on the platform of the Maserati Spyder which itself is based on a shortened platform of the recently replaced Coupe. The GS consciously evokes the classic Maserati A6 G Zagato of 1954 in its form, and like that design also has an all aluminium body.

Nissan plots BladeGlider production (2014)

Fri, 03 Jan 2014

By Ben Pulman Motor Industry 03 January 2014 10:30 Last month we brought you spyshots of Nissan’s new Almera hatchback; this week it’s the altogether more enticing news that bosses at the Japanese car giant hope to put the wacky BladeGlider concept car into production. The ‘swept wing’ BladeGlider is inspired by Nissan’s ZEOD RC, the company’s entry into the 2014 Le Mans 24-hours, and it seems production of the crazy concept is a possibility. ‘It’s in our mid-term plan,’ Nissan chief planning officer Andy Palmer revealed to CAR.

Ferrari California Hybrid on the way? And ‘KERS Confusion’ too.

Tue, 17 Apr 2012

Ferrari California Hybrid on the way? A patent application by Ferrari for a new hybrid system has lead to speculation that a Ferrari California Hybrid is on the way. Ferrari has been flirting with hybrid set-ups for years and actually previewed a 599 with a ‘HY-KERS’ hybrid system at Geneva 2012.