Pearl White Suction Cup Hand Sanitizer Dispenser For Car, Truck, Suv, Vehicle on 2040-parts.com

Made in the USA

 

Want to free up some vehicle space and make things safer by not having normal hand sanitizer dispenser’s or wet wipe towel containers shifting/rolling around in the car?  Tired of giving up a cup holder to store the hand sanitizer?  The suction cup mounted IndispensibleTM is the perfect solution!  The IndispensibleTM comes ready to fill with your favorite product and installs in seconds.  The IndispensibleTM can be mounted similar to where a radar detector would be as seen in our photos.  This places the IndispensibleTM dispenser where you are frequently reminded to sanitize your hands which is the # 1 doctor recommended method for reducing the spread of germs and viruses such as cold, flu, Ebola, Marburg, etc.  

The IndispensibleTM is ideal for use in the transportation arena where sinks are sometimes few and far between. Have your hand sanitizer suction cup mounted in the car, truck, SUV, Taxi, bus, van, trains, planes, any vehicle to promote a healthier transportation experience!

The IndispensibleTM is a unique, heavy duty, versatile liquid dispensing system, great for soap, shampoo, conditioner, lotions, and hand sanitizer. The adjustable suction cups, ergonomic design and compact size allows for easy mounting to virtually any smooth surface; ideal for sinks, showers, boats, campers, RV’s, motor homes, cars, trucks, SUVs, Taxis, buses, vans, virtually any vehicle. The 5 flush-mount and 2 extended-neck suction cups provide for a secure mount with nearly endless possibilities.

The IndispensibleTM is patent protected and built tough having UV protection in the high density polyethylene, crush-resistant body (see the twenty pound weight setting on the dispenser body as seen in our photos). This makes it ideal for vehicles as it rugged and requires only a smooth clean surface for mounting.

The IndispensibleTM is perfect for children. It’s easy to reach and easy to use. The reduced output pump is ideal for little hands (yet still provides plenty of output for all sizes) which saves money and alleviates waste and mess. The ease and accessibility promotes hand washing which is the # 1doctor recommended method for reducing the spread of germs and viruses. The IndispensibleTM can provide complete payback if it helps you avoid even one trip to the doctor. Our customers had this to say about the IndispensibleTM mounted in a bathroom sink, “Great product! My 3 year old can now reach the soap dispenser! A+".  This can also be mounted where it is convenient for your passengers to sanitize their hands. Even your children will find this easily accessible, convenient, and safe to use as shown in our pictures.

At half a cc displacement from the push pump, the IndispensibleTM uses two thirds less soap than normal soap dispensers. You will save time and money by refilling the dispenser less often.

The dispenser pump has a quarter turn lock for storage/traveling to eliminate spillage.

The dispenser body is made in Iowa, the suction cups are made in Pennsylvania, the pumps are from a U.S. Midwest manufacturer, and the IndispensibleTM is assembled in Iowa. This product is only sold by MBHD LLC, a 100 percent family owned Iowa company. Patents on this product are the sole property of MBHD Enterprises LLC.

Specifications:

Pearl White color

6.25 oz capacity

Dimensions (HWD) 122mm X 94mm X 57mm

A full dispenser will provide approximately 370 pumps at an output of .5 cc

This package includes: 1 pump with dip tube, 1 ready-to-fill dispenser body, 5 flush-mount suction cups and 2 extended-neck suction cups to provide for a variety of mounting possibilities. Each product is new and unused.

Tips for Use:

1.For best results to ensure great initial mounting, install on a smooth, warm, clean surfaces with warm suction cups. This can be accomplished by running warm water over the suction cups, then drying with a lint free cloth. A hair dryer could also be used on low to pre-warm the surface and suction cups prior to mounting.

2.How to mount dispenser to a clean warm smooth surface.

a. Firmly press on the front of the dispenser towards the clean warm dry smooth mounting surface to seat as many suction cups to the surface as possible. (Note –the top two suction cups are the most critical to seat as these two alone are capable of holding the dispenser.)

b. Positioning can be accomplished by releasing the dispenser and repeating step "a" or you can attempt to slide and twist the dispenser against the mounting surface until the desired location is achieved. If the dispenser wants to slide on the surface the surface or suction cups are to moist. Either remove the dispenser from the mounting surface and with a lint free material dry off both the surface and dispenser or you may position the dispenser were you like it and let it dry/evaporate in place for a few hours before using the the dispenser.

c. After the final positioning, firmly press on the front again to ensure as many suction cups as possible are attached to the mounting surface.

3. The IndispensibleTM comes ready to use, however, it may be necessary to change the configuration of the suction cups based on the shape of the surface to which it’s applied.

a. To reattach or attach a different suction cup, moisten the mushroom-shaped head of the suction cup. Avoid getting excess moisture in the dispenser body mounting holes, as the suction cups may not be able to push water out of the mounting holes while attempting to insert them because of the precision tolerances.

b. This insertion process works best if the body and the suction cups are warm and flexible, as they are designed to fit tightly.

c. Firmly push in the center of the suction cup applying force towards the very center of the body’s mounting hole. While applying this force rotating and twisting the suction cup will help roll it in to the mounting hole.

d. Continue this process until the suction cup is completely seated. The mushroom head will be not be visible and the suction cup’s main body will be seated evenly all the way around the dispenser body. The suction cup should rotate easily in the seated mounting hole when inserted correctly.

e. In more extreme vertical mounting structures, the top two or three suction cups maybe the only ones completely attached to the mounting surface because of the nearly straight up and down surface. In this case, the bottom two extended neck suction cups will only be used to hold the bottom of the dispenser out and provide stability during operation. This situation is normal and should not affect operability.

4. Locking and unlocking the dispenser pump. While viewing from the top, with the pump securely tightened to the dispenser body, turn the pump head one quarter turn counter-clockwise to unlock it. Turn the pump head clockwise one quarter turn to relock.

 

NOTE– Do not mount the IndispensibleTM in a manner that would inhibit safety in any way.

CHOKING HAZARD - The suction cups are removable for replacement/adjustability. In addition, extra suction cups are provided for versatility. These disassembled parts could be a choking hazard.