Performance Chip Tuning Box For Petrol Skoda Cars Obd2 Extreme Power on 2040-parts.com
US $22.99
Location:
Ljubljana, Slovenia
Condition:New
Brand:Unbranded/Generic
Country/Region of Manufacture:United States
Manufacturer Part Number:755474577
  MADE FOR SKODA PETROL CARS Eco OBD2+（Drive Nitro） Chip Tuning Box Plug and Drive OBD2 Chip Tuning Box
EcoOBD2 : Lower Fuel and Lower Emission
EcoOBD2 is a Plug&Drive Ready
device to function the reducing fuel consumption for the economy and
lower emission for the world.
EcoOBD2 is easy to install. Just plug it into the OBD2 connector of cars. EcoOBD2 fits all car from the year of 1996.
It works based OBD2 protocols as
remaping the Car's computer ECU. After driving 200 km road total,
EcoOBD2 adjusts itself to the car,
according to the drivers' habits and always keeps remaping the ECU to save fuel lower and immission.
What does EcoOBD2 make?
According to your driving habits, EcoOBD2 makes new map in the car's computer ECU for the vehicle's lower fuel consumption.
As you driving much more KM/Mile, EcoOBD2 renews the map and adjusts itself to match your car perfectly for more fuel saving.
What is EcoOBD2 Chip Tuning Box?
EcoOBD2 is a Chip Tuning Box which can be plugged into OBD2 connector of your car to decrease the fuel consumption of your car.
When it plugged into OBD2 connector,
EcoOBD2 receives the information from the car抯 computer ECU. With the
received data from ECU,
EcoOBD2 adjusts the boost pressure,
quantity of fuel, injection timing and pressure to decrease the fuel
consumption of your car.
EcoOBD2 Chip Tuning Box does not exceed the manufacturer抯 requirements. It works only within the tolerance of the engine.
EcoOBD2 finds out the hidden power of your car.
EcoOBD2 does not damage the engine and the car抯 computer ECU or not cause any negative effects to the car factory setting.
EcoOBD2 does not change any of the
settings permanently. To turn back to the car's original settings, just
unplug EcoOBD2 from OBD2 connector.
EcoOBD2 finds out the hidden power of your car.
- Up to 15% fuel savings
EcoOBD2 is very easy to use.
Plug EcoOBD2 into OBD2 connector of your car. And turn the ignition on for 30 seconds. And Turn the engine on.
EcoOBD2 settings are optimal and the best for your car. Even the parameters are different for each vehicle,
there might not be a need to make an additional adjustment.
EcoOBD2 will recognize your vehicle and your driving habits after around 200 km/150 miles driving,
and then EcoOBD2 adjusts itself to match your car perfectly.
EcoOBD2 works on the basis of changing the signal form ECU. As a consequence, it changes the whole injection map.
The main difference between EcoOBD2
Chip Tuning Box and Remapping tuning methods is that EcoOBD2 Chip Tuning
Box is easily removable,
and after unplug you go back to the
factory settings. EcoOBD2 is the cheap and safe type of tuning.
Remapping is a permanent change to your car.
This is the expensive tuning and you
cannot remove it. EcoOBD2 is equipped with the engine protection
function and 100% safe for your car engine.
EcoOBD2 produced on the printed circuit board in SMD technology. EcoOBD2 Chip Tuning Boxes are high quality.
Installation and Calibration
1 - Pull the Car Key out from the ignition.
2 - Find OBD2 connector(*) in your car and Plug in EcoOBD2
3 - Insert the key into the ignition and twist the key to the first stage. (Do not start the car)
4 - Press the reset buttom for about 5
sec. After releasing the buttom, just wait for a while about 30-54 sec.
(EcoOBD2 will communicate and establish connection with ECU)
5 - Start up the engine.
6 - EcoOBD2 will recognize your
vehicle and your driving habits, after around 200 km/150 miles driving
and thus EcoOBD2 will adjust itself to match your car perfectly for more
fuel saving.
EcoOBD2 Diesel : Blue
EcoOBD2 Benzine: Green
Each device available for LPG.
Does your car have OBD2 connector?
On-Board Diagnostics, or "OBD," is a computer-based system built into all 1996 and later light-duty vehicles and trucks,
as required by the Clean Air Act Amendments of 1990. OBD systems are designed to monitor the performance of some
of an engine's major components including those responsible for controlling emissions.
OBD2 necessarily for cars:
- Sold after January 1, 1996 in the USA
- Sold after January 1, 2001 in the European Union
- With diesel engine sold after January 1, 2003
(*)Where located OBD2 connector in your car?
1 Driver's side, underneath dasboard, in the area under the steering
column,
2 Driver's side, underneath dasboard,between the driver-side door and steering column area
3 Driver's side, underneath dasboard, between the steering column area and the center console
4 Driver's side, dashboard instrument/gauge area, between the steering column and center console
5 Driver's side, dashboard instrument/gauge area, between the driver-side door and steering column
6 Center console, vertical surface left of vehicle centerline
7 Center console, vertical surface right of vehicle centerline or on passenger side of center console
8 Center console, horizontal surface in front passenger area.
Certificates : CE / FCC / RoHS
Package content:
- EcoOBD2 Chip Tuning Box Interface
- User Manuel English
weight : 40 gr ( 0.04 kg )
Nitro obd2
lug and Drive NitroOBD2 Chip Tuning Box for Benzine Cars
35% More Power, 25% More torque
NitroOBD2 is a Plug&Drive Ready device to function the increasing the performance of engine.
NitroOBD2 is easy to install. Just plug it into the OBD2 connector of cars. NitroOBD2 fits all car from the year of 1996.
Plug and Drive NitroOBD2 Performance Chip Tuning Box for Benzine Cars
Certificates : CE / FCC / RoHS
NitroOBD2 Chip Tuning Box works based
OBD2 protocols as remaping the Car's computer ECU. After driving 200 km
road total, NitroOBD2 adjusts itself to the car, according to the
drivers' habits and always keeps remaping the ECU to increase the
performance of engine.
What does NitroOBD2 make?
According to your driving habits,
NitroOBD2 makes new map in the car's computer ECU to increase the
performance of your car. As you driving much more KM/Mile, it renews the
map. Thus it keeps the vehicle's power and torque increasing.
What is NitroOBD2 Chip Tuning Box?
NitroOBD2 is a Chip Tuning Box which can be plugged into OBD2 connector of your car to increase the performance of your car.
When it plugged into OBD2 connector,
NitroOBD2 receives the information from the car computer ECU. With the
received data from ECU,
NitroOBD2 adjusts the boost pressure, quantity of fuel, injection timing and pressure to increase the performance of your car.
NitroOBD2 Chip Tuning Box does not exceed the manufacturer requirements. It works only within the tolerance of the engine.
NitroOBD2 finds out the hidden power
of your car. NitroOBD2 does not damage the engine and the car computer
ECU or not cause any negative effects to the car factory setting.
NitroOBD2 does not change any of the
settings permanently. To turn back to the car's original settings, just
unplug NitroOBD2 from OBD2 connector.
NitroOBD2 finds out the hidden power of your car.
- Up to 35% more power
- Up to 25 % more torque
NitroOBD2 is very easy to use.
Plug NitroOBD2 into OBD2 connector of your car. And turn the ignition on for 30 seconds. And Turn the engine on.
NitroOBD2 settings are optimal and the best for your car. Even the parameters are different for each vehicle,
there might not be a need to make an
additional adjustment. NitroOBD2 will recognize your vehicle and your
driving habits after around 200 km/150 miles driving,
and then NitroOBD2 adjusts itself to match your car perfectly.
NitroOBD2 works on the basis of changing the signal form ECU. As a consequence, it changes the whole injection map.
The main difference between NitroOBD2
Chip Tuning Box and Remapping tuning methods is that NitroOBD2 Chip
Tuning Box is easily removable,
and after unplug you go back to the factory settings. EcoOBD2 is the cheap and safe type of tuning.
Remapping is a permanent change to your car. This is the expensive tuning and you cannot remove it.
NitroOBD2 is equipped with the engine protection function and 100% safe for your car engine.
NitroOBD2 produced on the printed circuit board in SMD technology. NitroOBD2 Chip Tuning Boxes are high quality.
Installation and Calibration
1* Pull the Car Key out from the ignition.
2* Find OBD2 connector(*) in your car and Plug in NitroOBD2 Chip Tuning Box
3* Insert the key into the ignition and twist the key to the first stage. (Do not start the car)
4* Press the reset buttom for about 5
sec. After releasing the buttom, just wait for a while about 30-54 sec.
(NitroOBD2 Chip Tuning Box will communicate and establish connection
with ECU)
5* Start up the engine.
6* NitroOBD2 Chip Tuning Box will
recognize your vehicle and your driving habits, after around 200 km/150
miles driving and thus NitroOBD2 Chip Tuning Box will adjust itself to
match your car perfectly for more fuel saving.
Each device available for LPG.
Does your car have OBD2 connector?
On-Board Diagnostics, or "OBD," is a
computer-based system built into all 1996 and later light-duty vehicles
and trucks, as required by the Clean Air Act Amendments of 1990.
OBD systems are designed to monitor
the performance of some of an engine's major components including those
responsible for controlling emissions.
OBD2 necessarily for cars:
- Sold after January 1, 1996 in the USA
- Sold after January 1, 2001 in the European Union
- With diesel engine sold after January 1, 2003
Where located OBD2 connector in your car?
1 Driver's side, underneath dasboard, in the area under the steering column,
2 Driver's side, underneath dasboard,between the driver-side door and steering column area
3 Driver's side, underneath dasboard, between the steering column area and the center console
4 Driver's side, dashboard instrument/gauge area, between the steering column and center console
5 Driver's side, dashboard instrument/gauge area, between the driver-side door and steering column
6 Center console, vertical surface left of vehicle centerline
7 Center console, vertical surface right of vehicle centerline or on passenger side of center console
8 Center console, horizontal surface in front passenger area.
Package content:
1pc x NitroOBD2 Chip Tuning Box Interface
1pc x User Manuel English |
Chips, Programmers for Sale
Performance chip tuning box for petrol fiat cars obd2 extreme power(US $22.99)
Performance chip tuning box for petrol citroen cars obd2 extreme power(US $22.99)
Superchips 98609 edge accessory system power switch w/ starter kit(US $141.34)
Dpf,cat,egr delete 6 level tuner for ford powerstroke 6.4l 2008-10 diesels(US $549.00)
Performance chip tuning box for diesel alfa romeo cars obd2 extreme power(US $22.99)
Performance chip tuning box for diesel volvo cars obd2 extreme power(US $22.99)
NASCAR: Rule changes to be clarified
Mon, 24 Jan 2011The 29th annual NASCAR Sprint Cup Series Media Tour opens on Monday in the Charlotte, N.C., area. It's a four-day smorgasbord of announcements, team-shop tours, optimistic predictions and the unveiling of new race-car paint schemes, team members and sponsorships. More than 150 writers, broadcasters and photographers will get a steady diet of claims such as “we're excited,” “we've been working harder than ever,” “we feel we've got everything in place” and “we can't wait to get started.” The tour will visit almost every team that plans to run the full series schedule in 2011, teams such as Earnhardt-Ganassi, Stewart-Haas, Penske, Michael Waltrip, Richard Childress, Kevin Buckler's TRG, Team Red Bull, Furniture Row, Richard Petty, Hendrick, Roush-Fenway and Joe Gibbs.
Jaguar XF SportBrake at Geneva and NO 4WD?
Wed, 30 Nov 2011Jaguar XF SportBrake - Geneva 2012 debut? There are reports coming from the US this morning that Jaguar will debut the XF SportBrake at the Geneva Motor Show, and it won’t get 4WD. As we reported last week, Jaguar has started the countdown to the debut of the XF Sportbrake – the new Jaguar XF Estate – with some ‘official’ spy shots and a new @sportbrake Twitter account.
Jay Leno gives us the lowdown on his McLaren P1 (video)
Tue, 13 May 2014Jay Leno drives his new McLaren P1 Jay Leno has no shortage of cars to play with in his collection, but if this video of Jay and his new McLaren P1 is anything to go by, the P1 is his favourite car by far (at least for now). Jay meets up with McLaren CEO Mike Flewitt at his garage and there’s plenty of chat about what makes the P1 special, and how it compares to the legendary McLaren F1 (a car Jay also owns). Then it’s time for a drive out in the P1, first with Mike Flewitt as a passenger and then with Jay on his own as he takes the P1 round the winding roads near his home, and Jay reveals that he put nearly 900 miles on the clock in the first five days he had the P1.