Find or Sell any Parts for Your Vehicle in USA

Porsche 911 3.0 Rebuilt Engine 911sc Motor on 2040-parts.com

US $3,595.00
Location:

Downey, California, US

Downey, California, US
Item must be returned within:14 Days Refund will be given as:Money Back Return shipping will be paid by:Buyer Returns Accepted:Returns Accepted Return policy details:All Porsche motors and Porsche transmissions sold come with our backed warranty service. Restocking Fee:No Warranty:Yes Part Brand:porsche

Remanufactured 3.0 Porsche 911 Motor

 

 

1978 - 1983 911 SC

CIS or Custom Carburetor

 

If your Porsche 911 engine is in need of rebuilding this is our specialty. Keeping your numbers matching and we make it simple. Just call us for our many options and we can pick up your vehicle or motor same day.

 

All our Porsche Remanufactured engines are professionally rebuilt with the following parts, machine work & labor:

 

Parts Included


 

Set Main Bearings
·        German Glyco
·        STD/STD
1-Rod Bearings
·        German Glyco
·        STD/STD
2-Intermidate Shaft Bearings
·        German Glyco
2-Timing Chains
·        German Iwis
·        1-Piece (non-link)
6-Chain Rails Set
·        German Swag
·        Turbo Up-Grade
12-Valve Guides
·        Bronze Phos
·        Longer lasting
·        Better lubrication
·        Harder material
12-Valve Stem Seals
·        Teflon Up-Grade
·        Longer lasting
Complete Piston Rings Set
·        For Mahle or Kolben Shimdt
12-Rod Bolts
·        German Iwis
12-Rod Nuts
·        German Iwis
12-Piston Pin Clips
·        Factory Porsche
·        Never re-use
4-Oil Return Tube
·        Factory German

1-Main Seal Front
·        German Reinz
1-Main Seal Rear
·        German Reinz
4-Oil Pump Seals
·        German Reinz
1-#8 O’ring
·        German Reinz
8-Oil Return Tube Seals
·        Green Viton
·        Longer lasting
1-Oil Pump Lock Tabs Set
·        Factory Porsche
3-Oil Cooler Seals
·        German Reinz
2-Camshaft Key Ways
·        Factory Porsche
2-Camshaft Pins
·        Factory Porsche
6-Head Copper Shims
·        Different thickness
·        German Reinz
24-Case O’rings
·        German Reinz
2-Upper Valve Cover Gaskets
·        German Reinz
2-Lower Valve cover Gaskets
·        German Reinz
2-Camshaft End Play Gaskets
·        German Reinz
2-Camshaft Plate O’rings
·        German Reinz
1-Oil Thermostat O’ring
·        German Reinz
2-Camshaft Housing Gaskets
·        German Reinz
1-Crush Washers 6mm Set
·        German Wurth
1-Crush Washers 8mm Set
·        Wurth
1-Lock Nuts 6mm Set
·       Wurth
1-Lock Nuts 8mm Set
·        Wurth
6-Exhaust Manifold Gaskets
·        German Reinz
·        Custom Gasket Sizes available
6-Intake Gaskets
·        German Reinz
1-Intermediate Shaft Gasket
·        German Reinz
6-Camshaft Line Seals
·        German Reinz
2-Camshaft Housing to Case Gaskets
·        German Reinz
2-Camshaft Cover Plate Gaskets
·        German Reinz
1-Oil Breather Gasket
·        German Reinz
1-Distributor Seal
·        German Reinz


Misc gaskets, O’rings & seals included all Reinz made in Germany!

 

Machine Work Included

Porsche Heads (6)
·        Disassembled and Inspected
·        Bead blasted
·        Valve guides installed
·        Valve stem seals installed
·        Complete valve job
·        Valve spring height adjusted
·        Head matting surface inspected
·        Deck height checked
·        Porting and Polishing available

·        Big Valve Conversion available

·        Racing Valve Springs available

Porsche Pistons & Porsche Cylinders (6)
·        Clean and Inspect Pistons and Cylinders for correct tolerances
·        Compression ratio given
·        Polished piston pins
·        Polished piston bores
·        Piston ring grooves cleaned
·        Cylinders Machined

·        Big Bore available

·        Hi-Compression available

Porsche Upper Valve Covers
·        Checked for warped and cracks
·        Machined surfaces

Porsche Lower Valve Covers
·        Checked for warped and cracks
·        Machined surfaces

Porsche Chain Housing Covers
·        Checked for warpage and cracks
·        Machined surfaces

Porsche Chain Housings
·        Cleaned and Inspected
·        Cover matting surface hand prepped
·        Case matting surface, resurfaced
Porsche Camshafts (2)
·        Inspect for camshaft wear or damage
·        Measured for lift and duration
·        Polished bearing surface

·        Performance Camshafts available

Porsche Rockers (12)
·        Radius re-surfaced
·        Bores polished

Porsche Rocker Shafts (12)
·        Cleaned
·        Polished

Porsche Camshaft Housings
·        Cleaned and Inspected
·        Camshaft housings resurfaced
·        Camshaft spray bars tested
·        Valve cover matting surface redone
·        Outer camshaft bores polished

Porsche Camshaft Sprockets
·        Inspected for wear
·        Cleaned and debured

Porsche Idler Sprockets
·        Inspected for wear
·        Cleaned and debured

Porsche Camshaft Aluminum Cover Plates
·        Cleaned and inspected
·        Resurfaced

Porsche Idler Arms
·        Cleaned and Inspected

Porsche Chain Tensioners
·        Clean and Inspect
·        Test for correct tension

Porsche Crankshaft
·        Magnufluxed
·        Micropolished
·        Checked for straightness

Porsche Intermidateshaft & Gear
·        Gear inspected for wear
·        Gear measured for tolerance
·        Shaft bearing wear measured
·        Shaft microppolished

Porsche Intermidateshaft Cover Plate
·        Inspected for cracks
·        Cleaned and resurfaced

Porsche Oil Pump
·        Oil pump rebuilt

Porsche Engine Case
·        Case cleaned
·        All bearing saddles prepped
·        Line bore measured and inspected
·        Case matting surfaces hand resurfaced
·        Chain housing matting surface hand resurfaced
·        Oil breather matting surface hand resurfaced
·        Oil sump matting surface hand resurfaced
·        Pistons squirters cleaned and tested
·        Intermidateshaft cover resurfaced

Porsche Oil cooler
·        Pressure Tested & Clean
·        Matting surface machined
Porsche Connecting Rods
·        Machine big end
·        Bores polished
·        Check for proper weight and balance

·        Race Rods available

 

Our auction is for rebuilding "YOUR" Porsche 1978-1983 3.0 motor, if it’s together or all apart does not matter!

 

If your motor is damaged, broken, burnt, missing parts or you do not have a Porsche engine 3.0 for rebuilding at all then please call us toll free at 1-800-756-0956 for any questions before you place your bid.

 

We are located in Southern California which is the leading location on Porsche rebuilding, Porsche parts and Porsche restoration because of quantities of Porsches in our state and the overall huge automotive industry located here in Southern California.

 

We have been in the “Porsche Only” rebuilding and wholesale business for over 15 years.

 

Our knowledge, quality and prices make us the leader in rebuilding over 1000 Porsche engines and Porsche transmissions!

 

Complete Removal & Installation Nation Wide! 

 

All Porsche motors sold come with full warranty on all parts and labor sold!

 

Click on Some of our Porsche Customers

Customer's Rebuilt 3.0 Video’s listed below!

 

    

    

    

usa.jpg usa picture by motormeisterinc transport.jpg Porsche transport picture by motormeisterinc

 Shipping is Easy & Affordable

Shipping is Easy, Simply strap your motor to a pallet and contact Mia for “Same Day” pick up of transmission ANYWHERE in the US, YES even in HI/AK/ PR!

 Transport Pickup and Delivery affordable

Same day pick up of your complete Porsche 996 for Removal and Installation ANYWHERE in US,
YES even in HI/AK/ PR!

 

 

Motor Meister has over 100 Porsche Engines IN STOCK!

& over 100,000 Used Porsche Engine Parts IN STOCK!

 

Crankshaft, Camshafts, Connecting Rods, Heads, Cases, Blocks, Oil Pumps, Intermediate shaft, Sprockets, Gears, Sumps, Pistons, Cylinders, Rocker Arms, Rockers Shafts, Bearings, Gaskets, Flywheels and More!

 

Sales and Technical

 

Ebay Shipping and Customer Support 

 

CALL TODAY! 1-800-756-0956 

 

Telephone US residents 800-756-0956  International 562-940-1905 Fax 562-940-1905

 

 

New Motor Meister Facility for 2010!
 

On behalf of the Motor Meister Crew we want to thank our customers for helping us grow after 15 years and now we are able to move to a new larger facility for 2010!

Motor Meister's offices are 4 times larger, a new clean engine building room, chassis dyno, from 2 lifts to 6 lifts and double the square footage inside and two separate yards.

 

 

 

Price listed are for rebuilding the customer’s engine as delivered or brought into the Motor Meister Inc. facility. Price listed do not cover any shipping, installations, removals, taxes, towing, storage, oils, lubes and gas. Prices maybe substantially higher. Pictures and Videos are for illustration only. Price listed do not cover any parts that are broken, burnt, bent, worn or incorrect. 9.75% tax on parts sold to California residents. Performance parts and modifications are designed and recommended for track, off-road & racing use purposes only and vehicles may never be used on a public highway. Motor Meister Inc. is not affiliated with Porsche Cars North America or Dr. Ing. h.c.F. Porsche AG., Porsche®, Porsche Crest® and logos are registered trademarks of Dr. Ing. h.c.F. Porsche AG. All Copyrights, Registered Trademarks and/or Registered Trade Names are property of their respective owners.

.


Powered by eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.

Chrysler posts $370 million net loss on costs tied to repaid loans

Tue, 26 Jul 2011

Chrysler Group LLC, after recording its first post-bankruptcy profit three months ago, posted a net loss of $370 million in the second quarter due to costs tied to the repayment of government bailout loans. Chrysler incurred a charge of $551 million in paying back the U.S. Department of Treasury and the Canadian loans that kept the automaker afloat in 2009.

Citroen DS3: Design a DS3 Roof competition.

Wed, 12 May 2010

The Citroen competition to design a roof and dash graphic for the DS3 has launched We’ve said from the start that Citroen were going to take a leaf out of the MINI book of marketing. Keep it in your face and churn out at least one special edition a month. And it certainly loks as if Citroen are on that path.

Fiat at the Geneva Motor Show – Abarth Punto EVO

Thu, 25 Feb 2010

The Abarth Punto EVO - Geneva bound Fiat’s hot Herberts – Abarth – don’t just have the Abarth 500C Convertible to stick on their stand at Geneva, they also have a tweaked and sorted Punto EVO – the Abarth Punto EVO – to get the attention of show-goers. The performance division of Fiat have stuck a bigger turbo on the Punto EVO which ups the output to 165bhp and drops the 0-60mph time to 7.7 seconds. But economy and emissions don’t seem to suffer with the EVO managing 47mpg and emissions of 142g/km.