Purchase PWM 30KHZ CCPWM 70A PULSE WIDTH MODULATOR INTELLIGENT CONTROL HHO GENERATORS in Malanda, QLD, Australia, for AU $205.00

Condition:New Brand:NQHYBRIDS MOTOR CONTROL:12 VOLT Manufacturer Part Number:NQCCPWM70 CE & FCC APPROVED PWM:PULSE WIDTH MODULATOR Compatible Makes:Jaguar HHO PWM:HHO CCPWM HHO GENERATOR:FUEL SAVER

You are bidding on a brand new 70AMP 3000HZ PRO X CCPWM (Pulse Width Modulator)

This item is new and in its box and is designed for HHO sytems and 12 volt motor control.

Your HHO Generator will run cooler and make more hydrogen which has greater ability to increase fuel mileage.

Intelligent Current Controller!

(1) Changing Amps directly, not changing the duty cycle.

(2) Fix a value of output current and Pro'X will make your

cell working at this value or lower. Don't need to worry

about over drawing power from battery and alternator. It

protects your batter y and alternator in an other worlds.

(3) Pro'X can work in both 12V and 24V by a small easy

switch outside the case. Don't need to change the cooling fans.

(4) Max Output 75AMPs, 30KHz

(5) Different Frequency ranges selecting for more different

purpose operations.

(6) Auto Save. The Frequency and Duty Cycle can be auto saved. When the data

achieves your need, stop tuning for 1 second. The data can be auto

saved.

(7) Memory After the Duty Cycle and the Frequency was saved, Pro'X runs at this recorded data next time when it is powered on.

(8) Safety wires for different type of sensor switches.

(9) Dual in Dual out wires, easy connection.

(10) Size 19.5x16.1x7.5cm

(11) Net Weight: 0.95kg

The PWM HHO Generator Controller FCC & CE APPROVED

For more information Ph 0740972713 or nqhybrids@activ8.net.au

This PMW may be used on any 12 volt or 24 volt system

ALSO AVAILABLE AT NQ HYBRIDS

HHO CELLS,   BUBBLERS,   GAUGES,   ¼ HOSE BARBS. ONE WAY CHECK VALVES, PWM’s ELECTROLYTE LEVEL INDICATORS.    EFIE’S. VAPORIZERS

Complete 11 Plate HHO Version 7 dry Cell kits to suite up to 2.5 litre petrol or diesel engines

or

Complete 21 Plate HHO Version 8 dry Cell kits

to suite up to 5 litre petrol or diesel engines.

SETS INCLUDE

To be Assembled 11 Plate Dry Cell

1800mm #10 Black wire

1800mm #10 Red wire

1800mm reinforced 1/4" tubing

6 Cable ties

8 Self Tapping Mount Screws

8 Hose Clamps

12 Electrical Connectors

1 30 AMP Gauge

Purpose built HHO 1 litre Bubbler tank

4 Hose Barbs

1 Vaporizer/Scrubber/Spark arrestor

1 1/4 Check valve

waterproof 30amp fuse holder

BONUS 30 AMP PWM

30/40 AMP RELAY

All electrical tabs and fittings needed.

EFIE   (Electronic Fuel Injection Enhancer)

Fuel Injection

Fuel injected vehicles use a computer and sensing devices to sense and maintain the correct air/fuel ratio. One of the key sensing devices is the oxygen sensor. Fuel injected vehicles have one or more oxygen sensors installed in the exhaust stream. The computer extrapolates what the air/fuel ratio is based on the amount of oxygen in the exhaust, as reported by the oxygen sensor.
When Hydrogen on demand device is installed, the petroleum based fuel is burned more completely. One of the results of this is that there is more oxygen (and less unburned hydrocarbons) in the exhaust stream. This is a good thing, and is in fact, what we are trying to achieve. However, the computer will perceive this condition as a "too lean" air/fuel mix. In other words, what is now a desirable condition in the exhaust will be interpreted as "not enough gas", and the computer will direct the fuel injectors to increase the amount of gas being pumped into the engine.The result is that the oxygen sensor and computer prevent efficient combustion from occurring

The Solution
The oxygen sensor "tells" the computer what the oxygen content is by providing a voltage on it's signal wire between 0 and 1 volt. 450 millivolts (.45 volts) means that the fuel/air mixture is correct. Higher values means the mix is rich (has too much gas), and lower voltages means the mix is lean. By adding voltage to the sensor's output, we can compensate for the additional oxygen in the exhaust.
The Electronic Fuel Injection Enhancer (EFIE) does exactly this. It adds a floating voltage to the top of whatever the oxygen sensor is putting out. It has an adjustment that allows you to control, to within a few millivolts, the amount of this added voltage. This allows the computer to be unaware of the additional oxygen content of the exhaust, and the electrolyzer can now achieve it's full potential in fuel savings.
Most cars have oxygen sensors both before and after the catalytic converter. The ones downstream from the converter do not need to be treated. Their data is used to determine when the converter has gone bad, but are not used in the air/fuel calculations. EFIEs are only needed for all upstream oxygen sensors

Wideband Quad EFIE

This is the EFIE for V6 and V8 engines that are equipped with wide band oxygen sensors. Note: Vehicles that use wide band sensors only use them upstream of the catalytic converter. The downstream sensors will still be narrow band. Therefore this product has 2 wide band EFIEs and 2 narrow band EFIEs



Wideband Dual EFIE

This is the EFIE for 4 cylinder engines that are equipped with wide band oxygen sensors, or any vehicle with one wide band and one narrow band sensor. Note: Vehicles that use wide band sensors, only use them upstream of the catalytic converter. The sensors will still be narrow band. Therefore this product has a wide band EFIE and a narrow band EFIE


Relay

The HHO generator wiring has one important necessary feature: its ability to automatically turn on and off the HHO gas generator.
Instead of using a toggle switch to operate the HHO system, a relay is installed. What is a relay? A relay is an electrical switch that controls another circuit. It is also a device that contain an electrical winding motor inside which when powered up, will allow connection of 2 wires or circuits together. This is important in our Hydrogen on demand wiring which needs to be shut off when we stop the engine. If we are using a toggle switch to turn the HHO generator on, there is a chance that we can forget to shut the toggle switch off. HHO Is EXPLOSIVE The relay is activated when you turn on the ignition and is turned off accordingly. You can fit a toggle switch in between to deactivate the HHO system as a method of override. ALL NQ HYBRID SYTEMS COME WITH A 30 AMP RELAY



THE BUBBLER

The Bubbler: is a simple flashback device, used to prevent the burning gas from entering the HHO gas generating chamber and creating an explosion.The HHO coming from the cell moves the electrolyte around. The bubbler acts a reservoir to help with heat build

ALL NQ HYBRID SYTEMS COME WITH A BUBBLER

ELECTROLITE

Now the installation of your unit should be complete. You are now going to Mix the Catalyst (electrolyte) with Distilled Water. KOH is recommended.                               Potassium hydroxide is an inorganic compound with the formula K OH. Its common name is caustic potash. Potassium Hydroxide is the best electrolyte for a Hydrogen Generator. We wont use any thing else for catalyst in our HHO Dry cells
The strength of your electrolyte mixture is what controls the amps drawn by your dry cell. To keep my unit running at 18 Amps or less and get a least 1 liter per minute of gas or more)
Start with 100gms of KOH to 900 gms of distilled water for start up , you may need to add more to get higher amps but run your unit with a weak solution to condition it first.
** Use "Safety First" rules when mixing KOH or other caustic materials. Mix thoroughly in a separate container.
* Once this has been mixed add to the reservoir, you should be able to see the water flowing into the dry cell. Bring the level up to the 3/4 mark on the reservoir and make sure to put the cap back on.
*** Now you HHO Dry Cell System should be fully functioning and ready for a test drive. Before you take a test drive start the vehicle, you should now see the water in full circulation. Double check for air and water leaks at this time BY getting a spray bottle and a teaspoon of dish soap once mixed spray on all of your hose connectors, bubbler cap and reservoir cap, if there are bubbles you have a leak and this needs to be fixed.

Always read MSDS data sheets when using corrosive / caustic solutions

Disclaimer In no event will nqhybrids be liable for any loss or damage to any vehicle or person including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from the use of our products. NQ Hybrids recommends a competent person installs there units and the purchaser does does his or hers own research on the use of these exsperimental fuel cells.

Redesigned Ford Focus expected to get 40 mpg on the highway

Wed, 20 Oct 2010

The redesigned 2012 Ford Focus will get an estimated 40 mpg in highway driving with an all-aluminum 2.0-liter engine mated to a six-speed, dual-dry-clutch automatic transmission. The normally aspirated engine combines variable camshaft timing and high-pressure direct fuel injection to crank out 160 hp and 146 lb-ft of torque. That compares with 140 hp and 136 lb-ft from the aluminum 2.0-liter engine used in the current-generation Focus.

Lotus Electric City Car Revealed

Sat, 18 Jul 2009

Lotus has produced the Lotus Electric City Car Concept But now comes news that Lotus have produced an Electric City Car Concept. Just 8’6″ long and 5’3″ wide, it is a Toyota iQ type vehicle – but smaller – and has the iQ’s 3+1 interior configuration. And it’s designed to be purely an urban car – something for popping to the shops and doing local errands.

Hyundai ix20 revealed

Thu, 02 Sep 2010

The Hyundai ix20 will debut at Paris As is often the case, ‘revealed’ is perhaps too strong a word for what we have on Hyndai’s latest offering – the Hyundai ix20. One up from a tease and not quite a reveal, Hyundai has sent us a sketch of the ix20 which will debut at the Paris Motor Show in a few weeks time. Just like a bus, you get nothing new in the oxymoron car sector (mini MPV) for ages and then two crop up at once.

Pwm 30khz Ccpwm 70a Pulse Width Modulator Intelligent Control Hho Generators on 2040-parts.com

Wideband Quad EFIE

Volt Meters for Sale

Redesigned Ford Focus expected to get 40 mpg on the highway

Lotus Electric City Car Revealed

Hyundai ix20 revealed