1.
Use Safety stands whenever a procedure requires you under the vehicle
or supports. Or have someone hold the lid open for you so that they can
raise or lower it as needed.
2. Before removing the old lift
support, inspect the end connections and compare them to the units on
your vehicle to make sure that they are the same As well as the extended
length.
3. Remove the old support from the vehicle by placing a
small flat headed screw driver under the U shaped band on the ends of
the support. Slowly turn the screw driver and it will lift up on the
band approx.1/8", then pull the support away from the vehicle and it
will release.
4. To install the new supports do the same
procedure in reverse. DO NOT jam the new support end over the ball
socket without lifting the U band slightly or damage may occur.
5.
Lift Supports need to be installed fully extended. In most cases you
just can't compress them unless they are on the vehicle. If you have any
issues during the installation PLEASE contact us. Never force a
support.
6. If the ends are not lining up the support may
need to be turned. To do this attach the shaft end of the support to the
vehicle and then turn the entire body of the support clockwise unit the
ends line up.
Shipping Terms
1. WORLDWIDE SHIPPING.
2. Orders processed within 24-48 hours of payment verification.
3. We only ship to confirmed PAYPAL addresses. Your PAYPAL address MUST MATCH your Shipping address.
4. The images shown are not the actual item and are for your reference only.
5. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
6. If you have not received your shipment within 30 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our happiness is your satisfaction.
7. Due to stock status and time differences, we will choose to ship your item from our first available warehouse for fast delivery.
8. Shipping time:
USA: CN EMS & USPS 7—15 DAYS ARRIVE. Europe,Australia,Canada: 15-40 days arrival. Others countries or remote areas may take longer.
Contact us within 40 days if item not receive.
Noted: pls don't bid the item if shipping time can't meet you.
Payment Methods
1. We accept payment via PAYPAL ONLY.
2. Payment must be made within 7 days of auction closing.
3. TOTAL AMOUNT DUE includes the final auction price plus S&H(Shipping and Handling).
4. S&H will be determined based upon the SHIP TO address. PLEASE NOTE: S&H DOES NOT INCLUDE DUTIES, LOCATL TAXES OR ANY OTHER IMPORTATION FEES.
5. Please list your special requests (color, packages, value of declaration, etc.) in the PAYPAL NOTES SECTION when you make payment.
inkfrog terapeak
On Aug-27-15 at 03:07:37 PDT, seller added the following information:
The Citroen C3 Picasso BLACKCHERRY
As we said only yesterday when we reported on the Peugeot 207 Sportium, the last quarter of the year is a difficult time for car makers, coming as it does between the new plate in September and the New Year in January. So the tried and tested formula for sales at this time of the year is the limited edition. Which is why we get the Citroen C3 Picasso BLACKCHERRY (it’s Citroen’s shouty capitals, not ours).
The 2015 Audi A3 sedan will be appearing in dealerships in a few months, and the trim and pricing details have been announced for the U.S. market. The engines on offer on this side of the pond are a 1.8-liter turbocharged four-cylinder making 170-hp and 200 lb-ft of torque, and a 2.0-liter turbocharged four-cylinder coupled with Quattro all-wheel drive, making 200-hp an 258 lb-ft of torque.
Ford is gearing up for a year-long celebration of the 50th anniversary of the Mustang in 2014, and revealed a logo Tuesday to be used on fan merchandise. The anniversary logo uses the traditional galloping pony in silhouette, placed above the words “50 years.” Ford designer Michael Thompson is credited with creating the anniversary logo. The logo will either be white on a black background or black on white, Ford says.