Find or Sell any Parts for Your Vehicle in USA
Car & Truck Parts > Safety & Security > Fire Extinguishers

Quick Fist Roll Bar Tool Mount #90050 Off Road 4x4 on 2040-parts.com

US $19.95
Location:

Jackson, New Jersey, United States

Jackson, New Jersey, United States
Quick Fist ROLL BAR TOOL MOUNT #90050 Off Road 4x4, US $19.95, image 1
Condition:New Brand:end of road Manufacturer Part Number:90050 UPC:Does not apply

 
Click for full size image.
Quick Fist ROLL BAR TOOL Mount #90050 NEW!!
Click any image to see it full size
Click for full size image.

NEW Quick Fist ROLL BAR TOOL Mount #90050

Use with the Original QUICK FIST clamp (sold separately) to mount a flashlight, shovel, axe, high lift jack or other tools from 1" to 2.25" (25 to 57mm) in diameter to a roll bar.

Use with the SUPER QUICK FIST clamp (sold separately) to mount a fire extinguisher, air tank, nitrous tank or other tools from 2.5" to 9.5" (64 to 241 mm) in diameter to a roll bar.

The safe working load for two QUICK FIST Roll Bar Mounts on roll bars less than 1.5" in diameter is 50lbs. Roll bars 1.5" in diameter or larger, the safe working load is 100lbs.

Fits all roll bars from 1” to 2.5” (25 to 64mm) in diameter

Contents:
(2 ea) Derlin® Roll Bar Mounts
(2 ea) 9/16" x 4" Stainless Steel Hose Clamps
(2 ea) 7"x1.5" Neoprene Rubber Strips
(6 sets): 7/8" x #10 Stainless Steel Bolts, Washers and Nuts

Installation:

It is best to attach the QUICK FIST RollBar Mounts as low as possible on your roll bar. Bottles like Fire extinguishers or C02 tanks should touch a deck or floorof the vehicle.

1. Bolt the QUICK FIST clamp to the Roll Bar Mount so that the bolt comes from the base of the Mount, and the washer and nut are on top of the rubber clamp. Repeat for the second mount.

2. Wrap the rubber strip around the roll bar where the Mount will be attached. The rubber will protect your roll bar from scratches and eliminates movement caused by rough terrain. Trim off any overlap leaving about ¼” gap between the ends of the rubber strip. Temporarily tape in place.

3. Open one of the hose clamps and feed the end through the Delrin Mount just above the base, close to the middle hole.

4. Tighten the hose clamp so that its screw is where the two ends of the rubber meet. Remove tape.

5. Repeat with the other Delrin Mount.

6. Check bolt tightness occasionally.

Installation of a High Lift Jack:

Using a 5/16” bit (do not oversize the drill bit), drill out the center hole in the Roll bar Mount and the mounting hole in the center of the original QUICK FIST Clamp. First insert a washer over the interior middle hole. Then insert a 3“ x 5/16”

stainless steel bolt that is entirely threaded (not supplied), add a washer and nut. Tighten. Push the QUICK FIST clamp onto the 3” bolt all the way to the nut. Add a washer and nut and tighten. Follow 2-6 above.

Mount the High lift bar on the two bolts and lock in place by closing each of the QUICK FIST clamps around the bar (under the handle).

DO NOT INSTALL ON ANY PART OF A ROLL BAR THAT IS HIGHER THAN THE BACK OF THE FRONT SEAT.

This minimizes life threatening objects from hitting an occupant in a roll-over. The safe working load

(SWL) for two Roll Bar Mounts on a roll bar less than 1.5” is 50lbs. Rollbars 1.5” in diameter or more, the SWL is 100lbs.

  • We ship worldwide
  • International customers: Request total before making payment
  • Ask about other shipping options
  • Most orders ship USPS Priority Mail
  • Ask for total if shipping seems to high
  • We will combine shipping, just ask or request total
  • Large packages will ship UPS

Paypal

Payment due within 7 days of purchase

Additional Information
  • Contacting us first before returning
  • Return shipping responsibility of buyer
  • Returned clamps must be in unused condition
  • Refund does not include shipping
eBay layouts
eBay layouts at BiggerBids.com.

Fire Extinguishers for Sale

Audi A7 Sportback Competition is a 322 bhp diesel special edition

Mon, 14 Jul 2014

Audi A7 Sportback Competition gets 322 bhp Audi has decided that a fitting way to celebrate 25 years of turbodiesel Audis is to create a special edition A7 Sportback with added power. Seems reasonable. So we get the Audi A7 Sportback Competition which comes with the regular 3.0 litre BiTurbo diesel but with just a little bit more oomph with 322bhp and 479lb/ft of torque – just 6bhp up on the normal lump.

Bentley Continental Supersports ‘Shatters’ Ice Speed Record

Tue, 15 Feb 2011

Bentley Continental SuperSports Ice Speed Record Well, there’s a turn up for the books. The Bentley Continental Supersports Convertible breaks the world speed record on ice. And we never even knew there was a world speed record on ice.

Grand Bentley – the New Bentley Arnage

Wed, 10 Jun 2009

The New Grand Bentley teaser shot And although the new Bentley won’t be with us on the roads until next year, Bentley has today started the inevitable long, drawn-out tease that precedes all car launches these days. And what is the new car to be called? Well, so far, The New Grand Bentley.

2040Parts.com © 2012-2024. All Rights Reserved.

Designated trademarks and brands are the property of their respective owners.

Use of this Web site constitutes acceptance of the 2040Parts User Agreement and Privacy Policy.

0.045 s, 11806 u