Quick Fuel Hr-750 Technology Hot Rod 750 Cfm Mech Red Line Kit, Free Carb Studs! on 2040-parts.com

  

 

 

 

AS OF 4/21/2016 THIS WILL NOW COME WITH FORD KICKDOWN LINKAGE

ALL NEW& IN STOCK  FROM QUICK FUEL,  HR-750 CFM THE HOT ROD SERIES

you get free carb studs with each carb you buy thanks rich

 

MECHANICAL SECONDARY MODELS

BORN FROM A NOTED RACING PEDIGREE THERE DIE-CAST DUAL PUMP MECH SECONDARY CARBS INCLUDE ALL THE FEATURES YOUVE COME TO EXPECT FROM QFT. SCREW-IN AIR BLEEDS, DUAL METERING BLOCKS, 4-CORNER IDLE, AND BUILT-IN SIGHT GLASSES ARE JUST A FEW OF THE REASONS YOUR ROD WILL RUN ITS BEST. TUMBLE POLISHED FOR LONG-LASTING GOOD LOOKS OUR: MECHANICAL MODELS WILL GIVE YOUR RIDE THE RAW PERFORMANCE IT DESERVES.

*CHANGEABLE AIR BLEEDS & HIGH SPEED FOR ULTIMATE TUNEABILITY

*ALUMINUM FUEL BOWLS WITH SIGHT GLASS WINDOW

*TUNEABLE SECONDARY OPENING RATE

*4 CORNER IDLE SYSTEM

Quick Fuel's ''New Cast'' all aluminum casted carburetors offer a tremendous weight saving over conventional zinc carburetors. Each carburetor features a tumble polished finish for corrosion protection and a long-lasting shine. Available with mechanical or vacuum secondaries and are hand assembled with non-stick gaskets and engine tested in the USA.

PRIMARY MAIN JET  72
SECONDARY JET  82
IDLE AIR BLEED  70
HI SPEED BLEED  31
PRI NOZZLE  31
SEC NOZZLE  31
NEEDLE & SEAT  110
POWER VALVE  6.5

 

carb comes with base gasket, air cleaner gasket, & 1 to 1 silver link, 1 black link for 60% primary before secondary opens.

  HOT ROD  Series Carburetors Secondary Linkage Adjustment

Super Progressive Black Link Top Hole Lower slot 60% primary before secondary opens.

Medium Progressive Gold Link Top Hole Top slot 40% before secondary opens. This is the standard linkage position for most applications.

1=1 Silver Link 3rd Hold Top Slot Using the alternate lower hole and top slot, the silver link provides a even opening ratio for both the primary and secondary throttle shafts.

Benefits & Features:

Full Round Shaft with new serviceable lever

QuickSet electric choke on all models with one wire hookup

QuickSet sight glass built into each fuel bowl - no messy foat adjustments

High flow needle & seat assemblies

Revolutionary cast metering block design features screw-in idle feed restrictions, four-door power valve, large headed stainless-steel mixture screws, and 4-corner idle

Main bodies feature screw-in air bleeds - no drilling required to tune your carburetor

Throttle bodies feature necessary vacuum ports for street use - 2 timed spark ports for vacuum advance - one in the metering block and one in the throttle body - PCV/Power brake port, and power valve blow-out protection

 

CARB COMES WITH A FREE.. $52.95 VALUE SINGLE INLET 3/8 HOSE WITH A CLAMP OR FEED YOUR MOTOR WITH 1 #6 INLET LINE,

FITS  4150 QUICK FUEL OR HOLLEY 4150 CARBS WHEN USING 7/8" X 20, COMES WITH RED ANODIZED FITTINGS,

OR YOU CAN HAVE A BLACK OR BLUE LINE KIT,  YOUR CHOICE JUST ASK

 

 

CHECK OUR FEEDBACK WE DELIVER!, NEED MORE INFO?  ----------> 952-469-3219 THANKS RICH, 

 BUYER PAYS $00 S/H/, HI, PR, AK, WILL PAY ACTUAL SHIPPING, NO COD, I UPS ONLY, IF YOU NEED TECH HELP FOR PICKING A CARB, TECH HELP -----> 270-793-0900 CLICK ON MY STORE TAG FOR MORE DEMON CARBS------------> THANKS

---

On Nov-07-10 at 17:44:13 PST, seller added the following information:

---

On Aug-16-16 at 09:32:14 PDT, seller added the following information: