ALREADY PRICED TO MOVE, BEST OFFERS FOR 2 OR MORE
FOR ONE KIT PLEASE USE THE BUY IT NOW OPTION
FIBERGLASS LINED RADIANT METALLIC HEAT SHIELD WRAP KIT
50 FOOT ROLL
WITH (8) 12" BALL LOC©
STAINLESS STEEL TIES
WRAP SPECS:
-
MATERIAL (INNER): PURE VIRGIN GLASS FIBER
-
(OUTER): ALUMINUM SILICON ALLOY
-
THICKNESS: 1/16 INCH
-
WIDTH: 1 INCH
-
TEMP: 1200°F CONTINUOUS
-
COLOR: METALLIC
-
PREMIUM WEAVE STAYS TOGETHER
-
RADIANT HEAT PROTECTION UP TO 2000°F !
STAINLESS STEEL CABLE TIE SPECS:
- 12"LONG X 3/16" WIDE / 300mm x 4.6mm
- HIGH POLISHED MIRROR SHINE
- 100% FIRST QUALITY 310 STAINLESS STEEL
- THEY WILL NOT RUST OR CORRODE
- HIGH DURABILITY NON FLAMMABLE NON CORROSIVE
- FULLY ROUNDED TIPS
- SMOOTH EDGES SELF-LOCKING (W/ BALL-BEARING LOCK!)
- NO SPECIAL TOOLS NEEDED FOR INSTALLATION
- THE HARDER YOU PULL THE TIGHTER THEY GET (DONT PULL BARE-HANDED)
- 122 POUND LOAD CAPACITY! BEATS ANYTHING ELSE ON THE MARKET
BEST SELLING S.S. CABLE TIES ONLINE.
CAN BE USED IN MULTIPLE APPLICATIONS INCLUDING:
-
AIR INTAKES
-
INTERCOOLERS
-
SUPERCHARGERS
-
TURBO PIPES
-
TUBING
-
EXHAUST HEADERS AND PIPES
-
STARTERS
-
HOSES
-
WIRING
-
COLD AIR INDUCTION SYSTEMS
-
PROTECT BODY PARTS AND COMPONENTS
-
REFLECT HEAT AWAY FROM SENSITIVE ELECTRONICS
-
USE TO MAKE CUSTOM BLANKETS
-
KEEPS HEAT WHERE YOU WANT IT AND AWAY FROM WHERE YOU DON'T!
NOT JUST FOR HIGH PERFORMANCE VEHICLES!
GREAT FOR THE EVERYDAY DRIVER TOO!
- EXTENDS ENGINE LIFE
- INSTANT FUEL SAVINGS, HIGHER MPG
- PROVEN TO REDUCE UNDER HOOD HEAT BY 70%
- EASILY INSTALLED BY THE NOVICE AND PRO ALIKE
- WILL REDUCE TURBO LAG
- WILL INCREASE HORSEPOWER
- EXTENDS THE LIFE OF PLASTIC PARTS, HOSES, WIRING & MORE, BY PREVENTING DRY ROT AND EARLY BREAK DOWN.
- NOT ONLY FOR HEADERS, WRAP HOSES, PIPES, TUBES TURBO/SUPERCHARGER HARDWARE AND MORE
- A GREAT WAY TO HIDE BLUING, WELD LINES OR JUST PLAIN UGLY PIPES ON OLDER OR CUSTOM MADE PIPES
HOW MUCH FIBERGLASS WRAP DO I NEED FOR MY PROJECT? / LOOK BELOW, OR SEND ME A PICTURE.
YIELD CHART:
CHART = WRAP NEEDED PER 1 LINEAR FOOT OF PIPE YOU PLAN TO WRAP.
ALWAYS ADD 10% TO TOTAL JOB AND ANOTHER 8-14" PER BEND APPROX. DEPENDING ON THE ANGLE
|
PIPE
DIAMETER
INCH/mm |
1” WIDE WRAP
PER LINEAR FOOT
Inches”/feet’ |
2” WIDE WRAP
PER LINEAR FOOT
Inches”/feet’ |
|
1-3/8”/35mm |
70”/5’ |
30”/2.5’ |
|
1/1/2”/38mm |
76”/6.33’ |
33”/2.75’ |
|
1-5/8”/41mm |
82”/6.8’ |
35”/2.9’ |
|
1-3/4”/45mm |
88”/7.33’ |
38”/3.16’ |
|
1-7/8”/48mm |
95”/7.9’ |
41”/3.5’ |
|
2”/50mm |
101”/8.4’ |
44”/3.66' |
|
2-1/8”/53mm |
108”/9’ |
46”/3.83’ |
|
2-1/4”/57mm |
113”/9.4’ |
49”/4’ |
|
2-1/2”/64 |
125”/10.5’ |
52”/4.33’ |
|
3”/76mm |
136”/11.33’ |
60”/5’ |
EXAMPLE: IF YOU HAVE 2" PIPES THAT ARE 10' LONG AND YOU WANT TO USE A 2" WIDE WRAP.....
LOOK AT THE CHART, FIND YOUR PIPE SIZE ON THE LEFT (IN THIS CASE 2" OR 50MM {SAME THING} ) THEN FOLLOW THE CHART TO THE RIGHT UNDER "2" WIDE WRAP" YOU WILL SEE YOU NEED 44 INCHES OR 3.83 FEET PER LINEAR FOOT OF PIPE
TAKE 44" or 3.66' AND MULTIPLY BY 10FT = 440 INCHES/36.6 FEET THEN ADD 10% ..... SO YOU NEED A 50 FT ROLL. DON'T FORGET TO ADD FOR BENDS
INSTALLATION:
CAN BE INSTALLED EITHER:
METALLIC SIDE DOWN, BEST FOR KEEPING HEAT IN.
OR, METALLIC SIDE UP FOR A RADIANT BARRIER KEEPING HEAT OUT.
- WEAR GLOVES AND A LONG SLEEVE SHIRT TO PREVENT ITCHING/AND IRRITATION.
- WRAP WILL SMOKE LIGHTLY AFTER INITIAL INSTALLATION (JUST FEW MINUTES).
- STARTING AT THE FLANGE END LEAVE ABOUT ¼"- ½" FOR HARDWARE.
- EACH WRAP SHOULD OVERLAP THE PREVIOUS LAYER BY APPROXIMATELY ¼"- ½"
- TURNS AND CURVES WILL HAVE BIT MORE OF AN OVERLAP.
- TRY TO KEEP THE WRAP AS SNUG AS POSSIBLE AS YOU GO AND CONTINUE TO THE END OF THE PIPE.
- USE A STAINLESS STEEL TIE AT BOTH ENDS TO HOLD WRAP IN PLACE.
- YOU'RE DONE!
IF YOU NEED STAINLESS STEEL TIES. PLEASE LOOK IN OUR STORE (SEE LINK BELOW)
CHECK OUT OUR OTHER FIBERGLASS, LAVA AND CERAMIC WRAP COMBINATIONS, KITS AND ROLLS. WE ALSO HAVE STAINLESS TIES IN 3/16" (STANDARD) AND 5/16 (MONSTER) IN LENGTHS FROM 4"- 54"! AND PACKS FROM 5 - 1000
THE BEST PRICES ON EARTH!
WE WILL SHIP YOUR ORDER FAST & FREE!!
> CLICK HERE TO VISIT OUR STORE <
WE STRIVE TO REACH THE FOLLOWING GOALS, QUALITY PRODUCTS, FAST SHIPPING, INTEGRITY, AND SERVICE AFTER THE SALE.
↓QUESTIONS?↓
PLEASE TAKE A QUICK MOMENT TO READ OUR POLICY'S
BEST OFFERS:
WE TRY OUR BEST TO WORK WITH EVERYONE. WE RECEIVE 20-100 OFFERS EACH DAY. PLEASE BE PATIENT WITH US. WE TRY TO REVIEW ALL OF THEM.. RIDICULOUS OFFERS WILL NOT BE RESPONDED TO.
FEEDBACK:
PLEASE CONTACT US WITH ANY ISSUES PRIOR TO LEAVING FEEDBACK OTHER THAN A POSITIVE WITH ALL 5 STARS. WE TRY VERY HARD TO MAINTAIN A HIGH SELLER RATING AND WANT YOU TO BE HAPPY WITH YOUR PURCHASE EVERY TIME!
INTERNATIONAL & APO CUSTOMERS:
SHIPPING IS FREE FOR USA ADDRESSES ONLY.
YOUR SHIPPING COST INCLUDES POST AND, OUR TIME FOR DOCUMENTATION, RESTRICTED GOODS CHECKS AND OTHER PROCEDURES UNIQUE TO EACH COUNTRY.
AVERAGE PURCHASE TO DELIVERY TIMES
(W/ STANDARD DOMESTIC SHIPPING):
MIDWEST/1-3 BUSINESS DAYS
EAST/ 2-4 BUSINESS DAYS
SOUTH/ 2-4 BUSINESS DAYS
WEST/ 3-6 BUSINESS DAYS
HI, AK, PR, GU, VI/ 4-7 BUSINESS DAYS
TIMES ARE NOT GUARANTEED
OVERNIGHT/EXPRESS SHIPPING:
IF YOU CHOOSE OVERNIGHT SHIPPING. PLEASE NOTIFY US AS SOON AS YOU PAY. CUT OFF IS 3-4PM CENTRAL STANDARD TIME. ORDERS PLACED AFTER THE CUT-OFF SHIP THE NEXT BUSINESS DAY. SOME ZIP CODES ARE NOT ELIGIBLE FOR OVERNIGHT SHIPPING AND MAY TAKE 2 DAYS.
ABOUT US:
EBAY SELLERS FOR OVER TEN YEARS. WE WANT TO GIVE YOU THE MOST VALUE FOR YOUR DOLLAR. OUR ITEMS ARE MANUFACTURED UNDER STRICT QUALITY CONTROLLED GUIDELINES. WE ARE LOCATED IN THE CENTRAL UNITED STATES! WE CAN AND WILL:
~ANSWER YOUR QUESTIONS
~UNDERSTAND YOU AND YOUR CONCERNS
~HAVE KNOWLEDGE ABOUT THE PRODUCT YOU MAY BUY FROM US
~SHIP YOUR PRODUCT FAST (EVERYDAY MONDAY- FRIDAY)
~SHIP FROM THE CENTRAL UNITED STATES, (ILLINOIS) GIVING FAST SHIPPING TRANSIT TIMES NATIONWIDE
~SHIP YOUR ITEM WORLDWIDE, WE ARE SPECIALISTS IN INTERNATIONAL SHIPPING AND CUSTOMS
FINALLY, IF YOU ARE UNHAPPY WITH YOUR PRODUCT WE OFFER AN EXTENDED RETURN, EXCHANGE, REFUND POLICY ON MOST ITEMS (WRAPS & KITS MUST BE NEW, UNOPENED & UNUSED)
PLEASE FEEL FREE TO CONTACT US WITH ANY QUESTIONS.
!!THANKS FOR STOPPING IN, COME BY AGAIN!! | 
Radiant metallic fiberglass hose pipe thermo wrap heat shield cold air kit m50k
Injen 03-07 evo 8/9/mr cast aluminum intake system w/ full intercooler piping(US $448.00)
Radiant metallic insulation fiberglass hose pipe wrap heat shield cold air tape(US $15.98)
Corvette intake manifold, without egr valve, "performer eps", edelbrock,(US $292.32)
K & n seventy-seven series cold-air intake(US $200.00)
Radiant metallic fiberglass hose pipe thermo wrap heat shield cold air kit m15k