Rear View Camera Set Ntsc Ccd Passat Cc Leon Altea Superb on 2040-parts.com

rear view camera -complete set:
License plate light camera + rear view camera -Interface

This rear view camera -complete set you have the option when reverse gear is engaged, the image of the rear view camera to reproduce directly on the monitor of your OEM navigation system.

Operation of the rear view camera -Interface

Due to the specially tailored to your vehicle configuration rear view camera -Paketes, can the rear view camera -Interface are infected very easily via Plug & Play on the terminal block of the navigation system. The provision of additional video input is permanently active, but like the original when reverse gear is engaged the rear view camera switched.

The license plate light camera

Our ingeniously simple to install reversing cameras can be easily retrofitted by replacing the indicator lamp on the vehicle - is a perfect retrofit camera not to install.

A particularly inconspicuous installation is possible and the original appearance of the vehicle is maintained.

The detection angle gives you a horizontal wide angle view of 170 °, ideal for use on the immediate area, so that the majority can be detected behind the vehicle.

Safety & Comfort profit

With this complete package you have a significant improvement in safety when reversing (eg recognition of children playing) a substantially simplified orientation when maneuvering or Einparken- all without installing any optically interfering additional monitors.

reviews:

Guide about the "detection angle" / "Viewpoint" with reversing cameras.

Reversing camera with 60 ° detection angle:

To make it as easy as possible to clarify what kind of impact the selected detection angle of the rear view camera, we recorded the representation of three different rear view cameras.

The but very small angle of 60 ° does not cover too much in width, but nevertheless illustrates the more "obstacles" in depth. Characterized the camera for monitoring the "blind spot" or for monitoring the immediate surroundings behind the vehicle is not suitable, since not the complete width of the vehicle is detected. The use of this camera could be used as digital rearview mirror for detecting the rear traffic, in agriculture for control of conveyer belts etc..

In contrast, a reversing camera with 170 ° detection angle:

The detection angle of 170 ° is enormous, it is extremely Captures much content in width. This is usually done through various wide-angle lenses. This has the disadvantage that the edges or the edge region are distorted. Content in the depth are shown very small, so you should use the camera only to monitor the immediate near range to be able to detect, for example in the license plate bar, or even in the trailer operation to the full swinging when maneuvering.

The middle ground, reversing camera with 120 ° detection angle:

From experience to her rear-view cameras have proved best with 120 ° detection angle. You easily capture the entire width of the vehicle, do not produce distortion and still provide a good representation of depth. For example, when mounted on the mobile home or even at the transporter, in the usual height of 2.30 meters, the camera already recorded more than 4 meters in width. aligned Down "barriers" are also in the deep well represented (see figure) Also suitable as a "spy camera" in the bumper of a car,. We carry this the reversing camera or STO STO-IR. For use at the mobile home or the Transportation, we have for example to the rear view camera IR18.