Rear View Camera Setup 7 Inch Rearview Mirror Monitor With 2 Video In For Dvd Tv on 2040-parts.com

#name#

The common problem: On vehicles with rear doors can not readily a rear view camera are mounted. it now uses a conventional configuration camera can indeed align them down, but the rear of many vehicles extends upward slightly round about. A normal rear view camera would capture this curvature and thereby collapse but the trailer coupling, the footboard or the bumper. This has been fixed.

High-tech rear view mirror with integrated monitor

With the included rear view mirror with integrated 17,78cm (7inch) rearview mirror monitor this set is rounded. Any driver who has built a Rearview Mirror Monitor wants this more miss under any circumstances. Friends will envy around her rearview mirror monitor, as this "super high-tech" means for your car.

Thanks 2 existing AV inputs, can neber a rear view camera , for example, a front camera, a games console, a DVD player, a DTT be connected tuner or video camera.

The installation is so simple that really nothing can go wrong. A "click" and the rearview mirror monitor is thanks to the "Snap On" - mounted quickly mechanism above the normal rear view mirror. The dashboard must not be changed, so no expensive service bill comes to you.

reviews:

Guide about the "detection angle" / "Viewpoint" with reversing cameras.

Reversing camera with 60 ° detection angle:

To make it as easy as possible to clarify what kind of impact the selected detection angle of the rear view camera, we recorded the representation of three different rear view cameras.

The but very small angle of 60 ° does not cover too much in width, but nevertheless illustrates the more "obstacles" in depth. Characterized the camera for monitoring the "blind spot" or for monitoring the immediate surroundings behind the vehicle is not suitable, since not the complete width of the vehicle is detected. The use of this camera could be used as digital rearview mirror for detecting the rear traffic, in agriculture for control of conveyer belts etc..

In contrast, a reversing camera with 170 ° detection angle:

The detection angle of 170 ° is enormous, it is extremely Captures much content in width. This is usually done through various wide-angle lenses. This has the disadvantage that the edges or the edge region are distorted. Content in the depth are shown very small, so you should use the camera only to monitor the immediate near range to be able to detect, for example in the license plate bar, or even in the trailer operation to the full swinging when maneuvering.

The middle ground, reversing camera with 120 ° detection angle:

From experience to her rear-view cameras have proved best with 120 ° detection angle. You easily capture the entire width of the vehicle, do not produce distortion and still provide a good representation of depth. For example, when mounted on the mobile home or even at the transporter, in the usual height of 2.30 meters, the camera already recorded more than 4 meters in width. aligned Down "barriers" are also in the deep well represented (see figure) Also suitable as a "spy camera" in the bumper of a car,. We carry this the reversing camera or STO STO-IR. For use at the mobile home or the Transportation, we have for example to the rear view camera IR18.