Find or Sell any Parts for Your Vehicle in USA

Rebuilt Sbc 1.94 # 462 , # 3890462 Chevy Double Hump Fuelie Cylinder Heads on 2040-parts.com

US $545.00
Location:

Arvada, Colorado, United States

Arvada, Colorado, United States
Condition:Remanufactured Manufacturer Part Number:3890462 Warranty:Yes Surface Finish:Resurfaced .007 Core Charge:NO CORE REQUIRED - SOLD OUTRIGHT

Up for sale is a professionally rebuilt pair of date matched Small Block Chevy double hump cylinder heads. Casting number is 3890462. The heads are dated E96 & F106 (May 9, 1966 & June 10, 1966). They have 64cc combustion chambers with new 1.94 intake and new 1.50 exhaust valves. The 462 is one of the best closed chamber cylinder heads of the 1960’s. Heads have been hot tanked, shot blasted, and magnafluxed. These heads have been completely rebuilt with 8 new hardened exhaust seats for unleaded fuel, 16 new thick wall bronze valve guides, a 3 angle valve job, 8 new  intake valves, 8 new exhaust valves, & 16 new Z-28 valve springs good for up to .500” valve lift. These heads have also been resurfaced .007” for a perfect head gasket seal. Heads are then thoroughly washed and fully assembled with 16 new premium umbrella valve stem seals, 16 new OEM “O” ring seals, and 32 new heavy-duty keepers. All valves and valve seats have been checked for a perfect compression seal. There is no porting or polishing on any intake port, exhaust port, or any combustion chamber. All threaded bolt holes are good. The heads come as pictured and are ready to install. The heads pictured are the actual heads you are buying and will receive. The double hump / camel hump heads were factory installed on all High Performance Fuel Injected and carbureted Chevrolet vehicles including Corvette, Camaro RS SS & Z-28, Chevelle Malibu, Chevy II Nova, Bel Air, & Impala. These heads will also interchange with other camel hump heads with casting numbers 461, 461X, 462, 291, 292, 186, 041, & 492. These heads will fit all 265, 283, 302, 305, 307, 327, 350, & 400 small block Chevy engines from 1955 to 1986 with no modifications (steam holes will need to be drilled for a 400) and 1987-1999 with correct intake manifold (except 1992 & up LT-1 reverse flow). I tried to list everything about these heads but please ask any/all questions before buying. Payment must be received within 3 days or item will be re-listed unless other arraignments have been made in advance. Shipping, handling, & insurance is fixed at $90.00 for both heads shipped to the continental US only. Alaska, Hawaii, and everywhere else will be higher. All international bidders please multiply the shipping calculator by 2 for two boxes. If you are outside the continental US & purchase the heads please do not pay until an adjusted invoice is sent to you with the added shipping costs. Thanks for looking.






 





 

 

 



 



Video: Track-day fun in the Lexus LFA

Thu, 06 Oct 2011

As promised, the third installment in our supercar video extravaganza--after the Chevrolet Corvette Z06 and the Porsche GT2 RS--gives you the lowdown on the hyperexotic Lexus LFA and its insane 552-hp V10 powerplant. Best described by senior editor for motorsports Mac Morrison as "shrieking like a melting witch," the Lexus LFA emits a wail unlike anything this side of a Formula One racer, and its performance isn't too far off that mark, either. Check out the walk-around and some on-track fun, then come back for the VBox lap on Friday.

Lexus CT 200h: On sale now +video

Tue, 15 Mar 2011

Lexus CT 200h - Now on sale in the UK We’ve covered just about all there is to be covered on the Lexus CT 200h. Everything from back when it was a very gold Lexus LF-Ch on through the launch and right up to the release of the CT 200h UK prices. So we thought we may as well go the whole hog and let you know how keen Lexus are to make it clear that the CT 200h is now actually on sale in the UK.

GM, SAIC to develop electric cars in China

Tue, 20 Sep 2011

General Motors will work with its joint-venture partner, Chinese carmaker SAIC Motor Corp., to develop parts and vehicle platforms for electric cars, the companies said on Tuesday. The automakers will use their existing joint venture in Shanghai, the Pan Asia Technical Automotive Center, as the home base to develop the electric car--aimed primarily at the Chinese market. GM says it plans to use the platform, components and technology from the project to build electric cars around the world for various markets.