Find or Sell any Parts for Your Vehicle in USA

Richmond Powertrax Posi Pkg Gm Chevrolet 8.5" 8.6" 30 Spline 3.42 Gears & Kit on 2040-parts.com

US $638.80
Location:

Las Vegas, Nevada, United States

Las Vegas, Nevada, United States
Condition:New Brand:Richmond Placement on Vehicle:Rear Manufacturer Part Number:LS201030 GM10-342 ZK GM8.6 Surface Finish:New Interchange Part Number:19559-10 Warranty:Yes Other Part Number:542097 542022 19559 Part Brand:Motive

Complete package for GM 8.5" 8.6" 10 Bolt Rear End Differentials 1999.5 to 2008. If you need a 1999 and older or a 28 Spline Unit or aren't sure, call us or message us 1st. When you purchase this please include year make model with payment or in a message. On Colorado and Canyon, you need to make sure yours is a 8.5/8.6 Rear End before ordering.


drivetrainpartsnumber.jpgdrivetrainpartsnumber.jpg



For A Limited Time Only $35.00 Mail In Rebate


 

You get the Richmond Powertrax Grip LS Limited Slip Posi and a Brand New Motive Blue OEM Level Ring and Pinion 3.42 Ratio as well as a Brand New Koyo Master Bearing Rebuild Kit. This gear set is easy to set up and will run quiet when set up correctly.


              Everything in this package has a 6 Month Unlimited Miles Mfg Warranty


The POWERTRAX® Grip LS is the latest design in traction adding differential technology. It combines the smooth operation of a limited-slip differential, with the strength of a fully machined case. Using carbon-fiber and steel friction plate technology, the POWERTRAX® Grip LS delivers streetable and consistent traction.  You asked for it and we made it, an all-new complete case, s-spring preloaded limited-slip differential. The POWERTRAX® Grip LS comes fully assembled. Because there are friction plates on machined internal gears, it is fully rebuildable.  This is as close as it gets to a traditional and trusted muscle car or truck style limited-slip.

  

POWERTRAX® TRACTION SYSTEMS are the ideal solution for just about any light truck, sport utility, and muscle car on the road today. Whether you need the safety of added traction for daily commuting, recreation, work, or just so your muscle car puts power to the pavement instead of burning one wheel up, the POWERTRAX® TRACTION SYSTEMS are your answer.


This will not work in 28 Spline Units.


Koyo Master Bearing Kit includes - Carrier bearings and Races, Pinion Bearings and Races, Pinion Seal, Complete shim Kits for Carrier and Pinion, New Ring Gear Bolts, Pinion Nut, Pinion Crush Sleeve,  Thread locking compound, Marking compound with brush, and Silicone to Reseal the Rear Cover. 


Please Read Our Return and Exchange Policy At the Bottom of this Auction before purchase.


You need to make sure your vehicle has a 10 bolt cover, and inside is an 8.5 inch Ring Gear and 30 spline only. The Ebay Supplied Compatiability Chart is not 100%. It will give you a good idea, but you need to make sure this kit is a match. If your not sure send us a message with all vehicle info, we can help you figure out what you have if your unsure.



Can be Found in these vehicles :

 

   Chevrolet / Chevy Avalanche 1500 (2002 - 2008)

 

   Chevrolet / Chevy C2500 3/4 Ton (2WD) (2000)

   Chevrolet / Chevy Colorado (2004 - 2008) -- 8.5" Rear End Only --

   Chevrolet / Chevy Express Van 1500 1/2 Ton (1999 - 2008)

   Chevrolet / Chevy S10 Blazer / Pickup (1999 - 2008)

   Chevrolet / Chevy Silverado 1500 1/2 Ton (1999 - 2008)

   Chevrolet / Chevy Silverado HD 1500 1/2 Ton (2001 - 2008)

   Chevrolet / Chevy Suburban 1/2 Ton (1999 - 2008)

   Chevrolet / Chevy Tahoe 1500 1/2 Ton (1999 - 2008)

   Chevrolet / Chevy Trailblazer (1999 - 2008)

   GMC Canyon (2004 - 2008) -- 8.5" Rear End Only

   GMC Envoy (2002 - 2009)

      GMC S15 Jimmy / Pickup (1999 - 2005)

   GMC Savana 1500 1/2 Ton (1999 - 2008)

     GMC Sierra 1500 1/2 Ton (1999 - 2008)

   GMC Sierra 1500 HD 1/2 Ton (2001 - 2008)

   GMC Sierra Denali (1999 - 2008)

   GMC Sonoma (1999 - 2004)

   GMC Suburban 1/2 Ton (1999 - 2000)

      GMC Yukon 1500 1/2 Ton (1999 - 2008)

   GMC Yukon XL 1500 1/2 Ton (2000 - 2008)

   Hummer H3 (2005 - 2008)

   Isuzu Ascender (2003 - 2008)

Just make sure you have and 8.5 8.6 10 Bolt Rear Differential 30 Splines

Outer Axle Bearings and Seals not included and not needed to Upgrade to Posi Pkg.  

We stock a complete line of parts for all front and rear differentials as well as transmission and transfer case parts and kits - message us with your part needs. We will see if we have what you need.

 

We sell all Auburn and Eaton Posi's and matching gears and kits for GM, Ford, Chrysler and more, message if there is something you are looking for, we can add it to Ebay for you.

Ships UPS Ground in the Continental USA. No PO Boxes. Need Physical Address.

Return and Exchange Policy

Returns and Exchanges must be done within 14 days of ship date. A 20% Restock Fee will apply too all Returns for any Reason. Buyer Responsible for all Shipping Cost. Message us before sending anything back so we can give you the correct address and RGA # plus help you to get the correct item needed.

Qoros GQ3 becomes Qoros 3: Geneva Motor Show 2013

Fri, 08 Mar 2013

The Qoros 3 – formerly the Qoros GQ3 – has been revealed at the 2013 Geneva Motor Show alongside concept Cross Hybrid and Estates from Qoros. Not because GQ Magazine objected, but because Audi did. It seems the man at the four rings took umbrage at a Qoros model name with ‘Q3′ in it, so it’s now the Qoros 3 or, specifically, the Qoros 3 Sedan.

Mercedes Ener-G-Force concept (2012) first pictures

Fri, 16 Nov 2012

Mercedes' latest concept car is, in its own words, 'pure, rendered science fiction'. This is the new Ener-G-Force, a one-off model depicting a civilian version of a futuristic police car. It's a product of the 2012 Los Angeles Design Challenge, which briefed manufacturers to dream up their vision for a highway patrol vehicle fit for the year 2025.

Jaguar XE (2014): spec, information teased on Jag's baby

Tue, 15 Jul 2014

Jaguar has started what is sure to be a long, sustained dripfeed of information on its new XE compact exec saloon ahead of a planned debut on 8 September 2014. Today's announcement reveals some of the engineering secrets of the Jaguar XE and is designed to whet the appetites of those premium car buyers ready for a change from their 3-series, A4s and C-classes. The Jag XE borrows suspension from elsewhere in the family, the company confirmed today.