Rivet Nut Kit Rivnut Riv-nut Installation Tool W/40 Sae Inserts Incl Aircraft Tp on 2040-parts.com
Sterling, Illinois, US
Standard Rivet Nut Kit rivnut riv-nut installation tool w/40 SAE inserts included. Metric is NOT available at this time.
Sets
threaded rivets into thin materials. Use for sheet metal, plastic and fiberglass.
Includes 40 SAE 6-32 8-32 10-24 1/4-20 inserts and install heads, 10 of each size. Permanent and
reliable fastening. Soft-grip handles. METRIC INSERTS and INSTALL HEADS are NOT available.
Here is a video showing how to use the rivnut tool : https://www.youtube.com/watch?v=fXIawjUbvFQ (This is NOT my video, but very good instructions)
REQUIRES
ACCESS TO ONLY ONE SIDE OF THE WORKPIECE. NUT CAN BE INSTALLED AFTER PAINTING OR
OTHER FINAL FINISHING OPERATIONS/PROCEDURES TO PROVIDE A STURDY SCREW/BOLT
ANCHOR POINT, without harming the finish. This eliminates problems
usually associated with putting threads into materials like thread cleaning,
part cleaning, and distortion. As some materials are also to thin to support threads on their own.
Economical - FOR MATERIALS THAT CAN not BE TAPPED or WELDED
Strong - Provides 6 FULL THREADS, EVEN IN THINNEST MATERIALS.
Simple/easy - Can be installed by a one person without help or access to the back side of a part/panel.
May be used as screw anchors or blind fasteners.
FOR AUTOMOBILES, HOME ELECTRIC APPLIANCES, ELECTRONICS, BUILDING AND CONSTRUCTION and many more things.
Can
be good for building speaker/sub enclosures, or for mounting points for
speakers on a vehicle. The number of uses are endless.
Buy with confidence! READ MY FEEDBACK
I will meet or beat other prices for the same or very similar tools sold by other sellers on eBay. Email me an item number and LETS MAKE A DEAL.
FREE SHIPPING IN THE U.S.A. ALSO INCLUDES: ALASKA, HAWAII, APO/FPO, PR. AA, AE, FM, GU, MH, MP, PW, AND VI
Low shipping to all other countries around the world!!
Need extra SAE 6-32 8-32 10-24 1/4-20 rivnuts? Or stronger steel ones vs aluminum. Inquire with ask a question, I can set up a special auction for you.
Items must be paid for within 72 hours of auction end or contact us and let us know when you intend to pay. Or you will be refereed to eBay's resolution department and item may be re-listed and no longer available to you.
Other Hand Tools for Sale
15" x 1/2" drive heavy duty breaker bar for sockets(US $8.99)
2 3/4" engine cylinder flexhone 2.75 hone 240 grit 70mm(US $24.99)
Gm m8x1.75 thread repair tools from kent-moore j-42385 lh-22803(US $24.99)
Kent-moore km j-42219 fuel tank sending unit remover & installer wrench jwh2444(US $29.99)
Kent-moore j-45177 outer seal installer chevy truck w/ quadrasteer lh-22767(US $69.96)
Kent-moore j-44222 camshaft sprocket holding tool inline 6 cyl lh-22694(US $39.96)
Nissan opens new North American design studio
Wed, 30 Mar 2005Nissan Design America Inc. has opened a new design studio in Farmington Hills, Michigan, on the grounds of Nissan Technical Center North America. The $14 million investment represents an expansion of Nissan's design capabilities in Farmington Hills as well as a shift in design capabilities.
Alfa Romeo 4C Spider revealed: Geneva Motor Show
Tue, 04 Mar 2014The Alfa Romeo 4C Spider (pictured) revealed in Geneva The Alfa Romeo 4C is the epitome of a modern ‘supercar’, with ultra light weight (for a production car) allowing the 4C to produce very good performance from its modest 17500cc engine. So producing an Spider convertible immediately raises the weight issue in a more dramatic way when the car’s abilities are so dependent on it low weight, but it seems the Alfa Romeo 4C Spider – previewed as a production car with a concept at Geneva today – has managed to keep the wight penalties of the convertible 4C down to a minimum. Thanks to a canvas roof and carbon fibre rollover bars, the weight penalty for the Spider is only about 60kg (around a 7 per cent gain) which shouldn’t hurt performance too much.
Audi A3 Clubsport Quattro Concept gets 518bhp – heading for Worthersee
Thu, 15 May 2014The 518bhp Audi A3 Clubsport Concept (pictured) is heading for Worthersee The Worthersee Show is looming at the end of May, and we can expect some extreme and mad concepts from the VW Group queuing up for attention. And among those will be this, the Audi A3 Clubsport Quattro Concept. Based on the Audi S3, the A3 Clubsport eschews the S3′s 2.0 litre TFSI in favour of Audi’s 5-cylinder 2.5 litre, and in the A3 Clubsport the wick gets turned up considerably to 518bhp and 442lb/ft of torque.