Rockford Fosgate M600-4d 600 Watt Marine Boat 4-ch Amplifier Amp+(2) Wakeboards on 2040-parts.com

Condition: BRAND NEW IN ORIGINAL PACKAGING

Warranty: 2 YEAR AUDIOSAVINGS

• (1) Rockford Fosgate M600-4D 600 Watt Marine Boat 4-Channel Class D Amplifier
• (1) Pair of Rockville RWB80B 8" Black 2 Way Wakeboard Tower Speakers Totaling 300W

Authorized Rockford Fosgate Dealer!

Features of M600-4D:

• Rockford Fosgate Prime M600-4D 600 Watt 4 Channel Class D Marine Amplifier
• Top mounted controls
• Conformal coated PCB and UV resistant finish for UV & Salt-Fog protection
• On-board Punch EQ with +18dB boost @ 45Hz
• 12dB/octave Butterworth crossover
• 2/4 channel switch
• 4 Gauge power/ground connectors
• Cast aluminum heatsink
• Tri-stage protection covers thermal, over-current and short circuits

Details: 

• CEA-2006 Compliant
• Number of Channels: 4
• Rated Power (RMS Continuous Power) : 100 Watts x 4 @ 4-Ohm 150 Watts x 4 @ 2-Ohm 300 Watts x 2 @ 4-Ohm Bridged
• Total Power (Sum of Rated Power) : 600 Watts RMS Dynamic Power
• Bridgeable : Yes
• Efficiency (average) : 80% @ 4-Ohm 75% @ 2-Ohm
• Crossover Controls : Front Channels : Variable 50Hz - 500Hz @ 12dB/octave
• Rear Channels: Variable 50Hz - 500Hz @ 12dB/octave
• Tone Controls : 0dB to +18dB @ 45Hz
• Signal Input : Low Level : 2 RCA Pair
• Signal Output : Low Level : 1 RCA Pair
• Power Input Connector : Block
• Power Wire Gauge : 4 AWG
• Speaker Output Connector : Block
• Speaker Wire Gauge : 12 AWG
• Heat Sink Type : Cast Aluminum
• Cooling : Convection
• Visual Indicators : Power Protect
• Circuit Topology Class : Full Range Class-D
• Frequency Response: 20Hz to 20kHz +/-1dB
• Shipping Weight : 7.038 Lbs. (3.19 Kg.)
• Dimensions (HxWxL) : 1.97" x 6.77" x 11.06" (5cm x 17.20cm x 28.10cm)

Description of RWB80B:

• No exaggerated power ratings: These speakers are rated with true world RMS ratings. No bootleg or exaggerated power ratings like other brands. These speakers are 200 watts RMS and 300 watts peak. (200 watts RMS is equal to about 500 watts rated by other brands)
• New and improved mounting bracket reinforced with steel - The mounting brackets are waterproof and durable plastic. They are reinforced with nylon and steel to make them extra strong. The nylon allows easy adjusting while the strength of steel can withstand the toughest conditions.
• Marine grade components and materials: these speakers are truly marine grade. They will not get damaged by water, salt water, or moisture. In addition the terminals (which are normally the first part of a marine speakers that gets damaged by water are made out of stainless steel and they are completely rustproof. There is also an additional waterproof coating cut completely protect the speakers.
• These can withstand all elements on the water for a lifetime of worry free use
• The mounting screws are 1/4" longer than other versions we carry to accommodate thicker mounting bars. In addition to wakeboard tower's on boats, we tested these to be perfect for installing in Jeep Cherokee vehicles and even ATV's.
   

Features:

• Rockville RWB80B Pair of 8" Black WakeBoard Tower Speakers Totaling 600 Watts (300 Watts per speaker)
• 8" Two-Way High Fidelity Speaker System
• Adjustable Nylon Mounting Bracket Reinforced With Embedded Steel
• 1" Polymide Dome Neodymium Midrange Tweeter
• Built-In Two-Way Crossover Network
• Fully Marinized Against Salt & Fresh Water Conditions
• Completely Water / Rust Resistant
• Terminals Are Sealed with Rubber Gaskets
• Specially Tuned for PA Voice Over
• Polypropylene Mica Injected Cone with Santoprene Surround
• High BL Magnet Motor Structure
• Y30 High Density Magnets
• Oversized 1.25” Kapton Voice Coil
• Large mounting screw accommodates roll bars found on many off road vehicles such as Jeep Wranglers, and ATV's equiped with a roll bar/cage.
• Color: Black

Details:

• Peak Power Handling: 300 Watts
• RMS Power Handling: 200 Watts
• Frequency Response: 60–20,000 Hz
• Sound Pressure Level: 98dB @ 1w/1m
• Impedance: 4 Ohms
• Mounting Depth: 10.5"

Includes:

• (2) Wakeboard Speakers
• Mounting Brackets
• Integrated Grill
• Installation Hardware

AudioSavings Return Policy:
At Audiosavings, we strongly believe in customer satisfaction and therefore offer a friendly return policy.

Prior to returning merchandise, contact us and we will give you a return authorization #.

You may return this item for a refund within 30 DAYS of purchase.

Warranty Repair/Exchange Period: 2 YEAR

Defective items:
If your item is defective within the first 30 days of when it was delivered to you; you have the following options:

• We will send you a pre-paid shipping label to replace the item for a brand new one.
• We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
• We will refund you 100% of your money back. For refunds it is the customer's responsibility to ship the item back to us.

Non-defective items:
If you want to return your item within the first 30 days of when it was delivered to you; you have the following options:

• You may exchange the item for another item of your choice. If the item you choose is more or less money we will work out the price difference with you. The customer is responsible to ship the item back to us. Please note if the item you return is used there will be a 10% restocking fee deducted from your credit.
• You may receive a refund for the item less a 10% restocking fee. Customer is responsible to ship the item back to us.

Replacement/Processing Time:
Your replacement or refund will process within 3-5 business days of when we receive the item.

Please note items with physical damage un-related to shipping are not covered under warranty. This includes blown speakers with burned voice coils. Registered software cannot be returned.

You MUST notify us within 48 hours if you receive an item that was damaged during shipping.

Process for returning items
Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility.