Rockford Fosgate Pm400x4 400w Marine 4ch Amplifier+4) 6.5" Boat Speakers+amp Kit on 2040-parts.com

Condition: BRAND NEW IN ORIGINAL PACKAGING

Warranty: 2 YEAR AUDIOSAVINGS

• (1) Rockford Fosgate Punch PM400X4 400 Watt Marine Boat 4-Channel Amplifier
• (2) Pairs of  Rockford Fosgate PM2652X 6.5" 680W 2-Way Marine Boat Component Speakers
• (1) Rockville RMWK4 4 AWG Waterproof Marine/Boat Amplifier Wire Kit
• (1) Rockville MRCA25 25 Foot Twisted Pair Marine RCA Cable

Authorized Rockford Fosgate Dealer!

Description of PM400X4:

The PM400X4 is a 400 Watt 4-channel amplifier with high dynamic power using Class-a/b technology and a conformal coated pc board designed for motorsport and marine applications.

The PM400X4 is perfect for 4-way front-stage/rear-fill or 3-way front-stage/subwoofer systems. Simply drop a pair of component speakers on the front channels and subs on the rear and BOOM - you got "The PUNCH." With its flexible design, the PM400X4 is an excellent amplifier choice for virtually any vehicle.

Features :

• Rockford Fosgate PM400X4 400 Watt Marine 4-Channel Amplifier
• Punch Marine Boat Amplifier
• High level input capable with Auto Turn-On circuit
• Features C.L.E.A.N. Set-up
• 12dB/octave Butterworth crossover
• On-board Punch EQ with +18dB boost @ 45Hz.
• Muted turn on
• Stealth top mounted control panel
• Cast aluminum heatsink
• Short circuit protection
• Over current protection
• Marine grade two part epoxy coating on circuit boards
• Marine grade stainless steel hardware
• CEA-2006 Compliant
• Number of Channels : 4
• Power Handling : 
• RMS Power Handling : 50 Watts x 4 @ 4-Ohm 
•                                      : 100 Watts x 4 @ 2-Ohm 
•                                      : 200 Watts x 2 @ 4-Ohm Bridged
• Total Rated Power : 400 Watts
• Dynamic Power (PVC/PowerCube®) : 82 Watts x 4 @ 4-Ohm 
•                                                               : 137 Watts x 4 @ 2-Ohm 
•                                                               : 266 Watts x 2 @ 4-Ohm Bridged
• Bridgeable : Yes
• Frequency Response : 20Hz to 20kHz +/- 1.0dB
• Efficiency (average) : 67% @ 4-Ohm
• Total Harmonic Distortion (THD+Noise) : 4-Ohm : <1.0% 
•                                                                : 2-Ohm : <1.0%
• Crossover Controls : Front High-Pass/Low-Pass (HP/LP) : 50Hz-250Hz @ 12dB/octave Butterworth 
• Rear High-Pass/Low-Pass (HP/LP) : 50Hz-250Hz @ 12dB/octave Butterworth 
• All-Pass : Yes
• Tone Controls : Front Punch EQ2 Bass : 0dB to +18dB @ 45Hz and/or 
• Front Punch EQ2 Treble : 0dB to +12dB @ 12.5kHz 
• Rear Punch EQ2 Bass : 0dB to +18dB @ 45Hz and/or 
• Rear Punch EQ2 Treble : 0dB to +12dB @ 12.5kHz 
• Function depends upon LP/AP/HP switch position
• Input Sensitivity : 150 mV - 12 V
• Signal Input : Hi/Low level : 2 RCA pair
• Power Input Connector : Captive C-Clamp

The PM2652X is a Punch 6.5" 2-way component system with a coaxially mounted tweeter featuring marine grade weather proofing technologies. Supplied in all white with a UV stable centrex injection molded plastic grille.

The PM2652X 6.5" Element Ready speaker is the perfect choice for your ride whether hitting the lake or the trails. This marine grade speaker features a 1" aluminum dome tweeter designed for high output and sonic clarity and is coated to protect it against the elements and UV radiation, preventing it breaking down over time. The tweeter is bridge mounted over the midrange cone giving the speaker a component quality sound and allowing for a full cone midrange driver.

The midrange is made of a mineral filled, injection molded polypropylene material and features integrated UV inhibitors protecting it from sun exposure.This is attached to the UV stable, Centrex® plastic, injection molded frame assembly by a Thermo-Plastic Elastomer (TPE) surround designed for maximum cone control and excursion. It too has been treated for UV radiation and salt-fog resistance for maximum lifespan. The cone also attaches to a moisture, fatigue and tear resistant Aramid fiber spider for additional linear control while being driven by our high excursion, matched motor magnetics structure with IDHS which improves power handling. 

Additionally, the speaker features fully insulated flex lead wires, corrosion resistant gold plated speaker terminals with integrated expansion connections for our PM2T-S tweeter kit and a fully sealed 12dB/ Octave crossover. The entire system is topped off with a UV Stable Centrex® plastic grill assembly with stainless steel hardware.

Features :

• Rockford Fosgate PM2652X 6.5" 340 Watt 2-Way Marine Boat Component Speakers in White (Pair)
• Punch Marine Full Range Luxury Speakers
• Power Handling :
• Peak Power Handling : 340 Watts (170 Watts per Speaker)
• RMS Power Handling : 170 Watts (85 Watts per Speaker)
• True Marine Grade compliance
• UV stable Centrex™ 814 injection molded plastic parts
• Corrosion resistant gold plated polarized input terminals
• Injection molded mineral filled polypropylene cone body with UV inhibitors
• UV and Salt-Fog resistant TPE (Thermo-Plastic Elastomer) surround
• 1" (25mm) bridge mounted component grade coated aluminum alloy tweeter
• Moisture, tear and fatigue resistant Aramid fiber spider
• Linear, high excursion matched motor magnetics and suspension design
• Fully insulated flex lead wire stitched under spider
• Integrated aluminum heat sinking shortening ring (IDHS)
• Spare terminal set for optional additional tweeters
• Integrated 12dB/octave sealed crossover with integrated protection circuit
• Available in white only
• CEA-2031 Compliant
• Configuration : 2-Way Full-Range
• Midrange Diameter : 6.5"
• Midrange Depth : 2.8"
• Frequency Response : 49Hz - 22kHz
• Nominal Impedance : 4-Ohm
• Crossover : High-Pass (HP) : 12dB
• Sensitivity (dB @ 1 watt/1 meter) : 89dB
• Grilles Included : Yes
• Mounting Hardware : Stainless Steel 
• Color : White

Rockville's exclusive Professional Marine Installation Kit features top of the line accessories which have been specifically engineered to withstand the toughest of marine environments. You will hear the difference and we guarantee you will not be disappointed!

Rockville Marine Audio Interconnect cables are specifically engineered to withstand the challenges of both salt water and fresh water marine installations. The utilization of tinned Oxygen Free 100% copper conductors with polyethylene dielectrics in a twisted-pair arrangement optimizes noise rejection. The small-diameter white PVC jacket is ultra-flexible enabling our cables to be easily routed around bends and through tight spaces. Our exclusive molded connector features a water proof inner cap that is heat shrunk in place over all solder connections thus guaranteeing a completely water proof and corrosion resistant connection. The locking plug design with split pin technology further insures tight connections that will not vibrate free even during the most extreme boating maneuvers.

Our Marine Grade Speaker Cables are engineered for maximum signal transfer with minimum impedance loss. The cable strands are all individually tinned, fine-strand, oxygen-free copper with aluminum composite construction and provide a high-fidelity speaker connection that is especially engineered for the marine environment. Woven down to a flat shape, the cables can be easily routed throughout the bulkhead with ease.

Rockville Marine Power Cables feature strands which are all individually tinned, fine-strand, oxygen-free copper with aluminum composite construction corrosion resistant and marine-ready. Fine-strand construction and soft PVC jacket deliver excellent flexibility. Our marine cables are much better quality than standard CCA wire kits. These kits have a very generous amount of copper in them. They are very similar in quality to the best brands kits on the market. The thickness of the wire is true-gauge. We have seen other brands who use thick plastic but very little copper inside the wire. Rockville wires are honest, true-to-spec and will make your music sound great.

Features:

• Rockville RMWK4 4AWG Guage Waterproof Marine/Boat Amplifier Wire Installation Kit
• 25’ Translucent, Twisted Pair, High Quality, Tinned-CCA Flexible PVC RCA Cable
• 20’ 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3’ Black Poly Woven Mesh to better resist chemicals in the battery compartment
• 4’ 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable
• 25’ 16 Gauge 100% Tinned-OFC, White, Non-Transparent Resin PVC, Flat Speaker Cable
• 20’ Blue Remote Wire
• 1PC Silver Mini-ANL Fuse Holder – Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
• 1PC 60A Mini-ANL Fuse
• 2PCS Ring Terminals
• 2PCS Spade Terminals
• 5PCS Speaker Cable Terminals
• 1PC Washer
• 10PCS White Cable Ties

Rockville marine audio interconnect cables are specifically engineered to withstand the challenges of both salt water and fresh water marine installations. The utilization of tinned OFC copper conductors with polyethylene dielectrics in a twisted-pair arrangement optimizes noise rejection. The small-diameter white PVC jacket is ultra-flexible enabling our cables to be easily routed around bends and through tight spaces. Our exclusive molded connector features a water proof inner cap that is heat shrunk in place over all solder connections thus guaranteeing a completely water proof and corrosion resistant connection. Our locking plug design with split pin technology further insures tight connections that will not vibrate free even during the most extreme boating maneuvers.

Features:

• Rockville MRCA25 RCA Interconnect Cable
• 25’ Ultra-Flexible PVC Shield
• Twisted Pair
• Premium Audiophile Marine RCA Interconnect Cable
• High Performance Water Proof RCA Plugs
• Tinned Copper Strands for Sonic Purity
• Outstanding Noise Rejection, Accuracy, and Frequency Response

AudioSavings Return Policy:
At Audiosavings, we strongly believe in customer satisfaction and therefore offer a friendly return policy.

Prior to returning merchandise, contact us and we will give you a return authorization #.

You may return this item for a refund within 30 DAYS of purchase.

Warranty Repair/Exchange Period: 2 YEAR

Defective items:
If your item is defective within the first 30 days of when it was delivered to you; you have the following options:

• We will send you a pre-paid shipping label to replace the item for a brand new one.
• We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
• We will refund you 100% of your money back. For refunds it is the customer's responsibility to ship the item back to us.

Non-defective items:
If you want to return your item within the first 30 days of when it was delivered to you; you have the following options:

• You may exchange the item for another item of your choice. If the item you choose is more or less money we will work out the price difference with you. The customer is responsible to ship the item back to us. Please note if the item you return is used there will be a 10% restocking fee deducted from your credit.
• You may receive a refund for the item less a 10% restocking fee. Customer is responsible to ship the item back to us.

Replacement/Processing Time:
Your replacement or refund will process within 3-5 business days of when we receive the item.

Please note items with physical damage un-related to shipping are not covered under warranty. This includes blown speakers with burned voice coils. Registered software cannot be returned.

You MUST notify us within 48 hours if you receive an item that was damaged during shipping.

Process for returning items
Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility.