Rockford Fosgate R600-4d Amplifier+capacitor+amp Kit on 2040-parts.com

Condition: BRAND NEW IN ORIGINAL PACKAGING

Warranty: 1 YEAR AUDIOSAVINGS

Package Includes:

• (1) Rockford Fosgate R600-4D Prime 600 Watt Car Amplifier 
• (1) Rockville RXC2D 2 Farad Stiffening Power Capacitor
• (1) Rockville RWK42 Complete 4 Gauge Wire Kit
  

• 12dB/octave crossover
• 2/4 channel switch
• 4 Gauge power/ground terminals
• Cast aluminum heatsink
• Top mounted controls
• CEA-2006 Compliant

• Number of Channels: 4
• RMS Power Handling:
  • 100 Watts x 4 @ 4-Ohms
  • 150 Watts x 4 @ 2-Ohms
  • 300 Watts x 2 @ 4-Ohms Bridged
• Total Power (Sum of RMS Power): 600 Watts
• Crossover Controls:
  • Front: Variable 50Hz - 500Hz @ 12dB/Octave
  • Rear: Variable 50Hz - 500Hz @ 12dB/Octave
• Tone Controls: 0dB to +12dB @ 45Hz
• Signal Input: Low Level: 2 RCA Pair
• Power Input Connector: Block
• Power Wire Gauge: 4 AWG
• Speaker Output Connector: Block
• Speaker Wire Gauge: 12 AWG
• Circuit Topology Class: Full Range Class-D

RXC2D
The Rockville RXC2D is a 2 Farad/12 Volt Stiffening capacitor which features a Lucite encapsulated LED Digital Voltage Meter display and logic control circuitry. The RXC2D assures undistorted performance from your high powered car amplifier system. The IC logic controlled circuitry provides for smooth fast charging and discharging and includes negative polarity protection against miss-wiring. Though the RXC2D is a 12 Volt capacitor, it features 24 volt "surge capacity" and will supply surge voltage when your amplifier booms with that extraordinary SPL Bass note.

The array of 4 blue LED's in the top of the capacitor meter charging and discharging by their flashing sequence. The LED Digital Voltage Meter displays the current electrical system voltage so that you can constantly monitor your electrical system.
 
Also included are clear Lucite unbreakable mounting brackets for sturdy support, stainless steel screws for assembly of the brackets, allen wrench for connecting of lug terminals (not included) to the capacitor terminals and a resistor for initial, safe charging of the capacitor with instructions.

Features:

• Rockville RXC2D 2 Farad Stiffening Power Capacitor
• 2 Farad/12 Volt Stiffening Capacitor with 24 Volt Surge Capacity
• Lucite Encapsulated Display and Logic Circuitry.
• Red LED Digital Voltage Display.
• Blue Led Flashing Charge and Discharge Metering.
• IC Controlled circuitry with negative polarity built-in protection.
• Dimensions: 13" long x 3.75" wide x 7" high
• Includes Clear Lucite Unbreakable Mounting Brackets, hardware and charging resistor with instructions

The Rockville RWK42 4 AWG (American Wire Gauge) amp kit has the following diferences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.

This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.

Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!

One other last thing worth noting about our kit compared to others. Our kit cosmetically looks the best. It has blue power wire, clear ground wire, and twisted pair RCAs with matching colors.  This model includes (2) sets of RCA cables.

Features:

• Rockville RWK42 4 Gauge 4 Channel Car Amplifier Wiring Installation Kit
• (2)  17 High Grade Twisted Pair of 100% Copper RCA Cable
• 17 4 Gauge Translucent Blue SuperFlex Power Cables
• 17 18 Gauge Blue Remote Cable
• 17 16 Gauge Clear Speaker Wire
• 3 4 Gauge Clear SuperFlex Ground Wire
• Gold Plated AGU Heat Resistant Fuse Holder
• 60 Amp AGU Gold Plated Fuse
• 7 Split Tube Loom
• Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets 
• Soft abrasion proof insulating jacket allows for 100% improved flexibility
• PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F

AudioSavings Return Policy:
At Audiosavings, we strongly believe in customer satisfaction and therefore offer a friendly return policy.

Prior to returning merchandise, contact us and we will give you a return authorization #.

You may return this item for a refund within 30 DAYS of purchase.

Warranty Repair/Exchange Period: 1 YEAR

Defective items:
If your item is defective within the first 30 days of when it was delivered to you; you have the following options:

• We will send you a pre-paid shipping label to replace the item for a brand new one.
• We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
• We will refund you 100% of your money back. For refunds it is the customer's responsibility to ship the item back to us.

Non-defective items:
If you want to return your item within the first 30 days of when it was delivered to you; you have the following options:

• You may exchange the item for another item of your choice. If the item you choose is more or less money we will work out the price difference with you. The customer is responsible to ship the item back to us. Please note if the item you return is used there will be a 10% restocking fee deducted from your credit.
• You may receive a refund for the item less a 10% restocking fee. Customer is responsible to ship the item back to us.

Replacement/Processing Time:
Your replacement or refund will process within 3-5 business days of when we receive the item.

Please note items with physical damage un-related to shipping are not covered under warranty. This includes blown speakers with burned voice coils. Registered software cannot be returned.

You MUST notify us within 48 hours if you receive an item that was damaged during shipping.

Process for returning items
Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility.