Rockville Rxm-t2 Micro 2400w 2 Ch Marine/boat Class D Amplifier 2x600w+amp Kit on 2040-parts.com

Condition: BRAND NEW IN ORIGINAL PACKAGING

Warranty: 1 YEAR AUDIOSAVINGS

• (1) Rockville RXM-T2 Micro 2400w 2 Ch Marine/Boat Class D Amplifier 2x600W CEA Rated
• (1) Rockville RMWK4 4 AWG Waterproof Marine/Boat Amplifier Wire Kit

Authorized Rockville Dealer!

Description of RXM-T2:

The RXM-T2 is part of the Rockville proton series. This is one of the most durable marine amps in the world. It is completely water resistant! It is protected from rain, moisture, splashing, heat, cold, saltwater, vibrations, the sun, and anything else you will throw at it! The small footprint makes this durable so you can mount the amplifier even in the tightest locations. The other thing that makes this amp so durable is that it is a class "D" power supply. So even if you run it at a really low impedance the amplifier can handle it! The amp is efficient and does not generate a ton of heat. So even if you abuse the amplifier and run it at 1 ohm load in stereo mode or a 2 ohm load in bridged mode; the amplifier will handle it! (We tested it).

Warning: This amplifier produces insane power! We do not want you to blow your speakers. Do not under-estimate this amplifiers' capability! If you are using this amplifier for 2 or 4 full range speakers, then please install with the gain level down all the way and then crank it up very slowly to protect your speakers from blowing. The reason we created this amplifier with so much power capability is for 2 reasons. One reason is to make it capable for powering lots of speakers per channel. Secondly was to give you enough headroom on the amplifier so you do not have to crank the gain all the way up all the time. This headroom ultimately will increase the sound quality like crazy!

The RXM-T2 is rated at 1200w RMS, but we totally underrated these! We just got new test reports back from our QC department showing this amp outputting a legitimate 1600w RMS when bridged! This amp performs at 600 x 2 @ 2 ohms RMS and when you bridge it you get 1600 x 1 @ 4 ohms! (To get even more power you can run it at 1 ohm in stereo mode and 2 ohm in bridged mode). This is a full range class "D" amplifier. It is super-efficient. The ratings are more than legit. They are actually under-rated.. This amp is CEA compliant. I invite you to test them and write a review when you are done testing.

We will offer a 90 day money back guarantee. If you are not happy with the output power or sound quality, we will call tag the amp back and give you all your money back!

One of the tricks to determine the real power of a car amplifier is to multiply the fuse rating by 10 to determine the true RMS power. This formula almost always works within 20 %. RXM-T2 has (3) 35 Amp fuses. This amplifier will also go louder than most amps with this same fuse rating due to how efficiently it runs.

I wanted to take a second and talk about the waterproofing process we use on this amplifier. We use a chemical compound which includes Acrylate Acid, Silicone, Polyurethane, and a few other substances. When these chemicals solidify, it becomes a protective on the PCB. This is what we call a conformal coating. This makes the amplifier water resistant. It also prevents oxidization and protects the amplifier from moisture. There are 3 ways manufacturers can conformally coat a PCB board. Soak, paint, or spray.  Once we finish building the PCB board we paint it with our conformal coating.

There is really no amplifier on the market that sounds this good and has this much output power at this price point.

Features:

• Rockville RXM-T2 Micro Class D Marine Amplifier
• Full-Range Class D Amplifier Architecture
• CEA Compliant Power Ratings:
• 800 Watts (2 x 400 Watts) at 4 ohms and 1% THD+N
• 1200 Watts (2 x 600 Watts) at 2 ohms < 1% THD
• 1600 Watts (1 x 1600 Watts) bridged @ 4 Ohms < 1% THD
• Peak Power Ratings: 2400 Watts: (2 x 1200 Watts) @ 2 Ohms and (1 x 2400 Watts) @ 4 Ohms bridged
• Fully marine grade amplifier with conformal-coated PCB board
• Protected from moisture, saltwater, UV, bumps, vibrations, heat, cold, and more
• Double Sided Surface Mount (SMD) PCB Design
• High-Speed MOSFET Power Supply
• Studio-Grade Bipolar Output Stage Transistors
• 2-Ohm Stable Stereo
• 4-Ohm Mono Bridgeable
• Mute and Delay Soft Start System
• Full IC-Controlled Protection Circuitry
• RCA Preamp Line Output
• Status Mode LED Indicator
• 8 Volt Preamp Circuitry
• 4 Gauge Lucite Encapsulated Power/Ground Terminals
• 12 Gauge Lucite Encapsulated Speaker Terminals
• Fully Adjustable 12dB / Octave Crossover
• Low Pass 50Hz - 250Hz
• High Pass 50Hz - 250Hz
• Fully Adjustable 12dB Bass Equalizer with Differential Circuitry
• Minimum THD at Rated Power: < 0.05%
• Frequency Response: 15Hz - 20KHz
• S / N Ratio: 100dB
• S/N Ratio: >97dB
• Damping Factor: > 200 @ 100Hz
• 3 x 35 Amp Fuses
• Dimensions: (W x H x L) 6.7˝ x 1.98˝ x 12.25˝

The Rockville Difference:
Whenever you see the Rockville shield on a product you know that it has the stamp of approval. While other companies simply import products from China, Rockville manufactures the products in China to lower your cost but do so under American style supervision and quality standards to get you that USA quality that you want!

Rockville's exclusive Professional Marine Installation Kit features top of the line accessories which have been specifically engineered to withstand the toughest of marine environments. You will hear the difference and we guarantee you will not be disappointed!

Rockville Marine Audio Interconnect cables are specifically engineered to withstand the challenges of both salt water and fresh water marine installations. The utilization of tinned Oxygen Free 100% copper conductors with polyethylene dielectrics in a twisted-pair arrangement optimizes noise rejection. The small-diameter white PVC jacket is ultra-flexible enabling our cables to be easily routed around bends and through tight spaces. Our exclusive molded connector features a water proof inner cap that is heat shrunk in place over all solder connections thus guaranteeing a completely water proof and corrosion resistant connection. The locking plug design with split pin technology further insures tight connections that will not vibrate free even during the most extreme boating maneuvers.

Our Marine Grade Speaker Cables are engineered for maximum signal transfer with minimum impedance loss. The cable strands are all individually tinned, fine-strand, oxygen-free copper with aluminum composite construction and provide a high-fidelity speaker connection that is especially engineered for the marine environment. Woven down to a flat shape, the cables can be easily routed throughout the bulkhead with ease.

Rockville Marine Power Cables feature strands which are all individually tinned, fine-strand, oxygen-free copper with aluminum composite construction corrosion resistant and marine-ready. Fine-strand construction and soft PVC jacket deliver excellent flexibility. Our marine cables are much better quality than standard CCA wire kits. These kits have a very generous amount of copper in them. They are very similar in quality to the best brands kits on the market. The thickness of the wire is true-gauge. We have seen other brands who use thick plastic but very little copper inside the wire. Rockville wires are honest, true-to-spec and will make your music sound great.

Features:

• Rockville RMWK4 4AWG Guage Waterproof Marine/Boat Amplifier Wire Installation Kit
• 25’ Translucent, Twisted Pair, High Quality, Tinned-CCA Flexible PVC RCA Cable
• 20’ 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3’ Black Poly Woven Mesh to better resist chemicals in the battery compartment
• 4’ 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable
• 25’ 16 Gauge 100% Tinned-OFC, White, Non-Transparent Resin PVC, Flat Speaker Cable
• 20’ Blue Remote Wire
• 1PC Silver Mini-ANL Fuse Holder – Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
• 1PC 60A Mini-ANL Fuse
• 2PCS Ring Terminals
• 2PCS Spade Terminals
• 5PCS Speaker Cable Terminals
• 1PC Washer
• 10PCS White Cable Ties

AudioSavings Return Policy:
At Audiosavings, we strongly believe in customer satisfaction and therefore offer a friendly return policy.

Prior to returning merchandise, contact us and we will give you a return authorization #.

You may return this item for a refund within 30 DAYS of purchase.

Warranty Repair/Exchange Period: 1 YEAR

Defective items:
If your item is defective within the first 30 days of when it was delivered to you; you have the following options:

• We will send you a pre-paid shipping label to replace the item for a brand new one.
• We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
• We will refund you 100% of your money back. For refunds it is the customer's responsibility to ship the item back to us.

Non-defective items:
If you want to return your item within the first 30 days of when it was delivered to you; you have the following options:

• You may exchange the item for another item of your choice. If the item you choose is more or less money we will work out the price difference with you. The customer is responsible to ship the item back to us. Please note if the item you return is used there will be a 10% restocking fee deducted from your credit.
• You may receive a refund for the item less a 10% restocking fee. Customer is responsible to ship the item back to us.

Replacement/Processing Time:
Your replacement or refund will process within 3-5 business days of when we receive the item.

Please note items with physical damage un-related to shipping are not covered under warranty. This includes blown speakers with burned voice coils. Registered software cannot be returned.

You MUST notify us within 48 hours if you receive an item that was damaged during shipping.

Process for returning items
Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility.