We are proud to be a member of the Assocation of Diesel Specialist.
This is a service purchase. You are buying our rebuilding services for your Stanadyne/Roosamaster rotary style injection pump fitted to most all the John Deere tractors, like the one listed in the picture. This is for the early model Deere applications and must have the prefix DBG/JDB in the data tag on the side of the pump.
How does it work?
Once you use the buy it now option, you will recieve an email with a label to send your injection pump into us, frieght prepaid. We will rebuild your injection pump and return it to you. This process generally takes 5-7 business days. This is a full rebuild that includes new metering valve, blades & liner, and all gaskets and seals. These are the items that fail the most on these injection pump. All pumps are completely dissassembled and all parts are inspected.
Please note: Any additional item that has failed in the injection pump other than items listed will be an additional charge. This is usually not the case, but because we cannot determine whats wrong with your pump without seeing it, so we have to state that in this ad. You can contact us directly and we can discuss the problem with your unit prior to you sending it in.
Don't be fooled by low cost rebuilds on the market today. One customer had a pump returned to an online vendor three times before sending it to us in desperation. We disaasembled the pump and found that it had never been rebuilt, only the shaft seals and top cover gasket were replaced.
You GET WHAT YOU PAY FOR and if you want a quality rebuild, we are your supplier.
WHAT MACHINE DO YOU CHECK THEM WITH?
This is the machine we use to check and calibrate your injection pump. It is 100% accurate and is designed to check flow, pressure, electrical and function of the Ford Powerstroke injector. We check units in a full range of operational spectrums, including idle, full load, partial load and high idle,
Once you use the buy it now option, you will recieve an email with a label to send your injection pump into us, frieght prepaid. We will rebuild your injection pump and return it to you. This process generally takes 5-7 business days. This is a full rebuild that includes new bushings, blades & liner, and all gaskets and seals. These are the items that fail the most on these injection pump. All pumps are completely dissassembled and all parts are inspected.
Please note: Any additional item that has failed in the injection pump other than items listed will be an additional charge. This is usually not the case, but because we cannot determine whats wrong with your pump without seeing it, so we have to state that in this ad. You can contact us directly and we can discuss the problem with your unit prior to you sending it in.
DO NOT INSTALL OUR PRODUCTS UNTIL YOU HAVE READ AND AGREED TO ALL WARRANTY TERMS.
DIESEL CARE AND PERFORMANCE INC.
LIMITED WARRANTY POLICY
Diesel Care and Performance Inc., hereafter mentioned as DCP, issues the following warranty on all DCP product. This warranty is extended to the original purchaser of the product only, unless approved of in writing by DCP. Our product is warranted to be free from defects in material or workmanship under normal use and service, for a period of one year from the original purchase date. The obligation of DCP under this warranty is limited to the repair or replacement of the defective unit. Repair or replacement of the unit shall be at the sole discretion of DCP. The defective unit must be returned within 15 days of the failure date to be considered for warranty.
Any product that is not installed according to the manufacturer’s guidelines is not covered under any warranty by DCP. This limited warranty is in lieu of all other warranties, either expressed or implied. All obligations or liabilities of DCP are expressly disclaimed, including claims for R & R expenses, liability of consequential damages, down time, loss of revenue, or any other inconvenience cost.
Our product is intended to be installed by the purchaser of DCP product. Any damage or defect caused by a third party installer is the sole responsibility of the original purchaser of the product. In addition, DCP is not responsible for any R & R expenses, liability of consequential damages, down time, loss of revenue, or any other inconvenience cost relative to third party installers of our product.
DCP assumes no liability or responsibility for pump failure that are the result of the use of fuels and/or additives not approved by the original manufacturer of the engine and/or vehicle.
This warranty does not apply to any part or unit that has been altered or repaired by anyone other than DCP. Nor, to any product which has been subject to misuse, abuse, neglect, accident, improper installation, or damage from foreign material such as water or dirt. This warranty will only be honored at the facilities of DCP.
The Hyundai ix20 - on sale in November
We got teased with the next instalment of the Hyundai world domination plan – the Hyundai ix20 – a few weeks before the Paris Motor Show, but only as a sketch tease. We had to wait another couple of weeks to get a real photo of the ix20 and then a reveal at Paris. But despite it only being last month that we got the first tease on the ix20 Hyundai will be ready to take orders next month, which means we’ll need to know what’s on offer and how much it costs.
The deadline for the 2012 Car Design News – Opel/Vauxhall Interactive Design Competition has been extended until midnight (00:00 GMT) Friday 11 May. Mark Adams, Vice President Opel/Vauxhall Design, announced the news in a video message to all entrants, in which he reiterated the brief – to design the Opel/Vauxhall Ampera of the year 2020. All students must submit both an exterior and interior design to be eligible to win paid internships within GM Europe, Opel/Vauxhall's parent company.
The new Audi A6 made it's first public appearance this week in Berlin. The fundamental proportions of the A6 with its low-slung windows and coupe-like roofline now comes with greater tension and dynamism. A prominent bodyside line above the side sills sweeps upward to meet the rear bumper edge, giving the entire body of the car a forward-pushing, dynamic thrust.
Cylinder head repair service 4 valve single motorcycle quad valve job(US $175.00)
Volkswagen passat engine brain box electronic control module; 2.0l, thru vin 0(US $100.00)
$50 rental kent-moore saab 9-3 2.0t st-145 blue cam camshaft alignment tool(US $50.00)
Volkswagen jetta engine brain box electronic control module; 2.0l, engine id a(US $100.00)
Petrol engine twin cam locking setting tool and flywheel holding tool kit
Bg 44k fuel system cleaner power enhancer ( 6 cans ) 11oz