Purchase Sea Monster Zombie * Custom Boat Wrap - Customized to Fit Your Boat in Naples, Florida, United States, for US $655.00

Condition:New Decal Type:Wrap Country/Region of Manufacture:United States

Phone (239) 431-7356 Monday-Friday 8am to 5pm (e.s.t)

Sold in directional pairs, one left and one right side.
This wrap purchase is for a boat wrap to fit on a boat that is between 18 feet to 20 feet in length
From the rubrail down to the waterline.**
Longer boats may cost a little more. Smaller boat sizes are fine as well.

We will customize the wrap AFTER purchase to fit the actual year, make and model of your specific boat to show the most available image area to achieve the best visual display.

Our boat wraps can be fitted to accommodate most boat models.

Once ordered and paid for, you will NEED to provide the
year, make, model, length of your boat and a side shot picture
as well as very accurate dimensions.
SEE EXAMPLE OF HOW TO MEASURE BELOW
Please email us with details.
Once you have approved the layout, we will manufacture it and ship within 36-48 hours. All products made on site.

Wrap will have excess in the front and rear as well as the top and bottom to allow for appropriate amount of trim.
Set up to be trimmed at the nose and a few inches around the back toward the motor.

Your graphics color may vary slightly from what you see depending

on you monitor Setting.

(boat not included, ha!)
Material is 3M IJ180 cv3 cast boat wrap vinyl film with 3M 8518 cast overlaminate for maximum UV protection.
Shipping to the lower 48 U.S. only. No shipping to Hawaii and Alaska.

Boat wrap by Wrap Graphics

Please try to follow these instructions to ensure success.

1. Specify the color or design you prefer, such as “Green” or "Diver & Octopus".

2. Submit an image of the boat. Make it a nice side shot like this example.
Submit images and artwork to:

3. Take some dimensions of the boat hull. Be sure to include the length along the rubrail,
the max depth from the rubrail down to the waterline edge where the wrap will end,
then along the hull every 2 feet or so as shown in the diagram.
Take Boat dimensions like this
4. Your wrap print will ALWAYS have more length and width than the actual dimensions
you send for “wiggle room” and proper trimming.

5. Be sure to include the year, make and model of your boat.

6. We submit a final mockup layout for your written approval showing the wrap you
chose superimposed on the image of your boat hull.

7. Once we receive your approval the finished boat wrap is produced
and shipped within 36 to 48 hours.
YOUR WRAP WILL COME IN A RECTANGLE SHAPE AS SHOWN IN THE ABOVE
EXAMPLE. THIS ALLOWS FOR PLENTY OF TRIM AREA.

** 3b. If you want your boat wrap to go up over the rubrail into the gunwales, or if you want the bow or stern wrapped as well, you need to provide those dimensions as well. This will add to the cost. You can use the below diagram as a reference to ensure your wrap fits and presents itself the best.

We have many variations of these graphics and also provide custom colors and requests.
If you have any questions, Please don't hesitate to call.

GM sees no potential buyers for Saab

Thu, 08 Jan 2009

General Motors has found no interested buyers for Saab, sources familiar with efforts to sell the Swedish brand say. GM put Saab under "strategic review" as part of the long-term viability plan submitted to Congress last month. In a subsequent interview with Automotive News, GM Vice Chairman Bob Lutz said strategic review is "code for we realize they're not working and something needs to be done." GM has not announced a decision to sell the brand, but has quietly shopped it around, the source said.

Making of the Porsche Panamera Sport Turismo (video)

Sun, 30 Dec 2012

Porsche has released a video chronicling the development of the Panamera Sport Turismo as the first model extension of the Panamera. Earlier this month we had a video from Porsche of the Panamera Sport Turismo on the move with comments and insights on the design process, and now we get a more detailed look at the development and thinking behind the transition from ugly duckling Panamera to stunningly good looking Panamera Sport Turismo. Porsche don’t want to call the Sport Turismo a Station Wagon, but that is effectively what the Sport Turismo is (and it can’t be a true Shooting Brake with four doors).

2012 Fiat Panda starts at £8,900

Tue, 07 Feb 2012

The new Fiat Panda starts at under £9k The 2012 Fiat Panda will cost from £8,900 for the POP 1.2 8v 69 CV, rising to £12,250 for the Panda Lounge 1.3 MultiJet 75 CV in the UK. The 2012 Fiat Panda was unveiled at the Frankfurt Motor Show last Autumn, and looks as though it’s going to continue the Panda tradition of simple motoring at affordable prices with the news that the starting point for the new Panda will be £8,900 for the entry-level Panda POP 1.2 8v 69 CV. Even the top-of-the-range Panda Lounge 1.3 MultiJet 75 CV comes in at a not too unreasonable £12,250, with another eight models in between the two extremes offering variations of trim and engines to suit sensible urbam motoring.

Sea Monster Zombie * Custom Boat Wrap - Customized To Fit Your Boat on 2040-parts.com

Decals for Sale

GM sees no potential buyers for Saab

Making of the Porsche Panamera Sport Turismo (video)

2012 Fiat Panda starts at £8,900