Seadoo Cleaned/rebuilt Single Carb 717 Mikuni Sbn 40 Carburetor Gti Gts Gs Gsi on 2040-parts.com

Cleaned/rebuilt carb from 1998 Seadoo GTI with 717 engine. This single SBN-40 Mikuni is jetted for any 717 single carb engine and set to run with an accelerator pump. This has a 175 main jet, 67.5 low, 1.5 Needle, and adjustment screws are set to stock factory settings. The accelerator pump is indeed operational. Comes with brand new mounting bolts and washers. Carbs should require no adjustments other than possibly tweaking your idle speed to your liking via the idle stop screw. I have gone through these completely and cleaned everything up, greased all springs/ pivot points/adjustment screws, and replaced any internal components that I decided were in need of replacement with OEM Mikuni parts. Also, all internal fasteners have been switched to stainless allen head (see my other items for details, I sell these in a kit), to improve reliability and make rebuilding easier in the future. These have also been painted and clearcoated for additional corrosion protection. If you are just looking for a cheap set of carbs to just keep your ski running long enough so you can sell it to your brother in law, these probably aren't for you. I rebuild a lot of watercraft carbs and I put forth a lot of time and effort in order to ensure they are trouble free for a very long time. But don't just take my word for it, I will guarantee these carbs to give you zero problems after installation and even for the next 3 years (as long as you store your Seadoo properly ***e.g. Fog, fuel stabilizer, dry place, seat off***. Comes with brand new mounting bolt set, choke set screws, linkages etc. Essentially, you buy these, put your gasket underneath and tighten 2 bolts, attach throttle and choke cables, attach feed and return fuel hoses, and ride. I will even include the old gasket If you need it in a pinch.
All my parts come from freshwater skis and are in good working condition, unless otherwise noted. I won't sell parts made in China. All my new parts are made in the same country as they were originally produced. Please contact me if there is a certain part you are looking for, as I have parts for several different Seadoos and often times have a good idea of which parts work with which skis. If you save me from having to list an item here on Ebay, I can give you a discount.