Side Number Plates 2001 Yamaha Wr250f Wr 250f Plastics Wr400f 01 02 Oem on 2040-parts.com
Washington, Utah, US
This auction is for a side number plates in fair condition.
This item was removed from a functioning 2001 Yamaha WR250F and was tested completely prior to removal. It may fit many other years and models so check with your local dealer before purchasing for fitment questions.
These plates are ready to install and put to use. They are ready to install and put to use. They have some heavy scratches and deep gouges. They might have some small cracks but will still function fine. This part may fit the following vehicles. It is the buyer's responsibility to verify compatibility with your local dealer.
1998 WR400F
1999 WR400F
2000 WR400F
2001 WR250F
2001 WR426F
2002 WR250F
2002 WR426F
We are parting out the complete bike. Visit our Ebay Store to view the other parts from this bike. Yes, we do combine shipping. See our policies below.
We stand behind our parts 100%.
We are committed to providing you a good usable part. If you are not satisfied for any reason, please contact us immediately and we will strive to make it right. We do not sell junk parts and discard anything that we wouldn’t put on our own bikes. However, we are human and can make mistakes so please contact us if there is any problem with the part that is not shown in images or mentioned in the description and we will strive to make it right.
We ask in return that a 5 star feedback rating be awarded once you are satisfied.
***Please take a moment to read our policies before buying***
Part Condition: We strive to provide images and a description that fully identifies any wear or damage to the part. We do not sell parts that are unusable. We test each bike before parting it out to identify any problems with components before they go up for sale. You will receive exactly what you see in the images unless otherwise noted in the description. If you don’t see an item in the images then it is not included in the auction.
Part Compatibility: Most parts will fit a wide range of models. We only guarantee it will fit the make model and year of the bike the part was pulled from. In some cases we do provide other models that the part may fit based on dealer data, but we do not guarantee fitment with these models. Please contact your local dealer to verify fitment prior to purchasing.
Shipping: Parts are shipped out within 24 hours of receiving payment, unless payment is received on the weekend in which case the item will be shipped out on the following Monday.
Expedited Shipping: If you require expedited shipping, please contact us prior to purchasing the part to be sure we can meet your needs. We use FedEx or USPS Express mail and can help verify that you will get your part as expected.
Combined Shipping: We do offer combined shipping discounts. If you purchase several parts at the same time, contact us before paying for the items and we will provide you with a single invoice for all the parts including shipping. Please do not ask for combined shipping estimates prior to purchasing the parts. We will only charge you what it costs us to ship the combined items.
International shipping: You are responsible to pay your country’s customs fees, import duties, taxes, etc. These fees will not appear in the listing and will be charged to you by your country’s customs office. USPS priority mail is usually the best value for international shipping. International shipping can be very expensive for heavy items so please enter your location into the shipping calculator and consider the shipping charges before buying. We do not mark merchandise values below value or mark items as “gifts” so please do not ask us to falsify shipping documents.
Utah State Sales Tax: We are located in Utah; therefore, buyers located in Utah are required by law to pay Utah state sales tax. This tax will automatically be added on to your invoice if applicable.
FEEDBACK: We will leave high feedback once payment is received. WE WORK HARD TO DESERVE A 5-STAR RATING FROM YOU. If you feel like you cannot leave a 5-star rating, please contact us first and we will strive to make it right. It is a waste of your time to open a complaint with ebay or paypal prior to contacting us because we are committed to resolving your concern whether you open a complaint or not.
RETURNS: Returns are accepted within 14 days of purchase. The buyer is responsible for return shipping. There is a restocking fee for all returns. This fee will equal the cost of the original shipping plus any additional Ebay or Paypal fees Cannibal Cycle incurred as a result of the order. When the return is a result of our error, there is no restocking fee. There are no returns on electronic items because electrical problems elsewhere in your bike can damage components that are placed in the system. We test run our bikes before parting them out to ensure everything is in good working order.
On Oct-01-13 at 13:56:34 PDT, seller added the following information:
Fairings & Body Work for Sale
Shock guard 2000 suzuki rm250 rm 250 rear mud flap 96-00 oem(US $15.99)
Front number plate 2000 kx250 kx plastics fairing kx500 kx125 96-02 ufo plastics(US $14.99)
73-76 kawasaki h1 triple tail section 74 75 body rear(US $49.00)
Bmw r1100rt r1100 rt windshield adjustment motor bracket assembly 46632313790(US $99.99)
Hayabusa gsxr 1300 rear fairing center cover blue 99 00 01 02 03 04 05 06 07(US $16.99)
Cycra skid plate speed armor high impact black yamaha yz125 2006-2012(US $54.43)
Audi A3 & S3 Saloon: New York Auto Show 2013
Wed, 27 Mar 2013The 2014 Audi A3 and Audi S3 have been revealed at the New York Auto Show, a new range topper for the A3 range. Launches UK summer 2013. Aimed primarily at the US and Chinese love of traditional three box saloons, the booted version of the A3 gets a few tweaks to set it apart from the hatch (apart from the boot) such as more pronounced curves on the side, flared wheel arches, new bonnet contours, new bumper and air intake design, tweaked grill, new lights at the back and a boot spoiler.
Wayne Cherry to receive EyesOn Design Lifetime Design Achievement Award
Mon, 22 Oct 2012Wayne Cherry has been chosen by a panel of his fellow designers as the winner of the EyesOn Design 2013 Lifetime Design Achievement Award. Cherry, who spent his entire design career at GM, joined the company in 1962 after graduating from Art Center and was part of the team that designed the 1966 Oldsmobile Toronado and the 1967 Chevrolet Camaro. In 1965 He was transferred to GM's British operations, Vauxhall, and led the design work on the XVR Concept and designed the SRV and the 1978 Equus.
Caterham CDX Limited Edition: first pictures
Tue, 10 Jun 2008By Dimitri Pesin First Official Pictures 10 June 2008 16:03 Caterham has returned to its K-series roots with a new version of its Seven, dubbed the CDX Limited Edition. Not a catchy moniker perhaps, but the new car has been built to commemorate 15 years of the Caterham Driving Experience (CDX) – the track days where you can drift or slalom a Seven. As well as the gloss black paint, plus decals along the sides mimicking the CDX cars, the big news is the return of the K-series powerplant delivering 135bhp through a five-speed ‘box.