Siemens Deka 107962 High Performance Fuel Injector 100 + Available on 2040-parts.com
Saint Paul, Minnesota, US
Genuine Siemens / Mototron DEKA IV High Impedance Injectors
Ultra-Compact, high flow injector at just 48mm end to end! These injectors flow 60 lbs/hr at 43.5 PSI ( 3 BAR ) and up to 85 lbs/hr at 87 PSI! In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector.
These injectors are able to function at high fuel pressures and don’t exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures.
Engine performance and running quality are enhanced through the optimized spray pattern. Unlike competitors “pencil stream” high flow injectors; these High Flow injectors utilize a multi-orifice tip providing a true 30 degree spray pattern for improved mixture preparation. This results in lower BSFC and better idle quality than many injectors with less flow.
FEATURES:
- Genuine, reliable Siemens Injectors
- Excellent response characteristics
- Robust Design
- High Impedance
- Low Impedance performance characteristics with High Impedance Compatibility
Specifications:
- Coil Resistance: 12.5 Ohms / High Impedance / High-Z (No ECM driver modifications required)
- Static Flow Rate @ 43.5PSI ( 300kPa ) w/Gas: 60 lb/hr = 630 cc/min = 453 g/min
- Static Flow Rate @ 87PSI ( 600kPa ) w/Gas: 85.7 lb/hr = 900 cc/min = 648 g/min
- Gain: 0.11ms/mg
- Offset: 0.055ms
- Turn on time @ 14VDC: 1.14ms
- Turn off time: 0.85ms @ 600KPa
- Connector: Bosch EV1
- Series: DEKA 4 ( DEKA IV )
- Orifice Type: Multi-orifice
- Spray Pattern: 30 Degree Spray Cone
- Factory fitted with Viton upper and lower o-rings
- 48mm end to end
Equivalent Part Numbers:
- Siemens FI114962 or 107-962 ( 107962 )
- Mototron INJ-GAS-002 ( S107)
- Accel 74620S
- MSD / Edge 2030
Posted with eBay Mobile
Fuel Injectors for Sale
- Siemens deka 107962 high performance fuel injector 100 + available(US $15.00)
- Siemens deka 107962 high performance fuel injector 100 + available(US $15.00)
- Siemens deka 107962 high performance fuel injector 100 + available(US $15.00)
- Fuel injectors set 1993 93 ford f150 lightning 5.8 5.8l(US $114.99)
- 2008-2010 ford 6.4l f250 - f550 alliant power stroke injector set - free s/h(US $2,735.12)
- Caterpillar diesel fuel injectors 3406e rebuilt (set of 6) * w/ exchange * low $(US $1,859.62)
Drive trailer gets our right foot all twitchy
Tue, 09 Aug 2011Once in a while, in between the Fast and Furious movies, we pine for some real old-school car chases on film--whether they involve police, murderers or other race-car drivers. Le Mans comes to mind, along with Bullitt, or anything by John Frankenheimer. And if a car-centric movie wins a few indie awards, that's all the better.
Video: Rolls-Royce Wraith design process revealed
Mon, 18 Mar 2013Rolls-Royce has released a video exploring the design process behind its Wraith fastback, revealed earlier this month at the Geneva motor show. The video is one of a series that look at the Wraith's development process, focusing on the design and performance of the Wraith. Key figures behind its development such director of design Giles Taylor and head of interior design Ian Sheppard feature, explaining how the Wraith evolved the way it did and how the design teams made their decisions.
BMW goes front-wheel drive for the 2-series Active Tourer
Thu, 13 Feb 2014BMW's long-held reputation for producing only rear- and four-wheel drive vehicles comes to an end with the the new 2-series Active Tourer, its first-ever front-wheel-drive production model. The cornerstone of BMW's Geneva show stand next month, the 2-series Active Tourer marks a significant turning point for the German automaker, adopting a transverse-mounted engine and standard FWD. It arrives here in early 2015.