Smiths 1968-70 Norton Commando 150mph Speedometer & 9000rpm Tachometer Rebuilt! on 2040-parts.com
Portland, Oregon, US
OUR REBUILD SERVICE WORK ON THESE GAUGES IS WARRANTIED FOR A FULL TWO YEARS!!!! TWICE AS LONG AS ANYONE ELSE IN THE WORLD!!!! Smiths 1969-1970 NORTON Commando 150 mile per hour speedometer (fully rebuilt) and Smiths Norton 9000 RPM tachometer. Bottom faces of these NORTON Smith's gauges are marked RSM 3003/12 on the tachometer and SSM 3001/02 on the speedometer. The speedometer only has 5 tenths of a single mile on it which was 'run in' distance only when it was on a calibration stand. The tachometer is, of course, marked as a 4 to 1 unit. The internal parts of these gauges have been removed, completely renovated and calibrated to meet the specifications of newly remanufactured gauges. The rebuild of these Smiths gauges included the following: The cans (cases) were professionally powdercoated to Concours quality standards. The cans do not have a single ding, dent or damage. Then the insides of the cans were painted with white epoxy paint (the only paint that will not peel, turn to dust) for many, many years. Then the blue, light enhancing, paint was sprayed on the one section of the inside the EXACT same way and in exactly the same shade as Smiths did it when they were built. This gives a softer shine to the light rather than just harsh white light. The correct shade of bright white was added to the needles. Then NEW bezels, glass, upper and lower rubber glass sealing seals, new stainless steel chassis screws (will never rust or tarnish), the internal and external shock absorbing rubber biscuit mounts and the stainless steel nuts and washers (for the mounting of these to the stock NORTON barrel brackets) were added. This set of NORTON gauges is ready to JUST BOLT ON AND GO!!!!. I understand these particular gauges are correct for all NORTON COMMANDO 750's in 1968, 1969 and 1970. May fit other years and models but only you can decide if these are right for your particular application. Shipping is $13.00 within the 48 states. Will ship throughout the world using the US Post Office's Express International Mail with full value insurance and it also comes with a tracking number for the buyer's and seller's peace of mind. You will be able to track the package all the way to you doorstep. You are, of course, also free to pick this item up locally for free. Any returns must be accomplished within 7 days of receiving item. Return must be the same item you were sent. NO SUBSTITUTION OF ITEM OR SUBSTITUTION OF ANY / ALL PARTS ON ITEM AND ITEM MUST BE IN THE SAME UNDAMAGED CONDITION AS PICTURED AND AS SHIPPED. Any substitution will invalidate seller's return policy and as such WILL NOT BE HONORED AS A VALID RETURN. I will gladly combine shipping costs on multiple wins. Paypal is payment of choice but I also accept other PROPAY, POSTAL, etc. Payment must be received within 7 days of end of auction. Any questions just e-mail me. Thank you and good luck on the bidding!!!
Antique, Vintage, Historic for Sale
- 1952 harley el rigid pan fl fle knucklehead panhead hydraglide oem outer primary(US $0.01)
- 1952 harley el rigid pan fl fle knucklehead panhead hydraglide oem oil tank(US $0.01)
- 1952 harley el rigid pan fl fle knucklehead panhead hydraglide oem plug holder(US $10.50)
- Nos harley-davidson panhead,shovelhead hydra-glide fork panel side screws 2823(US $24.99)
- Vespa 125 super de 1969-1970. (US $3,900.00)
- Marzocchi choques ref 87632 , de 32 cm longitud de yamaha xs 850 . (US $395.00)
BMW 1-series M Coupe (2011) first official pictures
Mon, 10 Jan 2011This is the new BMW 1-series M Coupe, and after months of tantalising teases, we’re finally getting to see M Division’s new baby. Under the bonnet of the BMW 1-series M Coupe is a forced-induction six-cylinder engine, but purists should be kept happy by the fact that it’s still rear-drive and is only available with a manual gearbox. Plus the BMW 1-series M Coupe will cost less than £40k.
Adrian van Hooydonk named Director of BMW Group Design
Tue, 03 Feb 2009In the wake of Chris Bangle's decision to resign from the top job, Adrian van Hooydonk takes over as Director of BMW Group Design with immediate effect. In his new position van Hooydonk will be responsible for the design development for the BMW, Rolls-Royce and Mini brands. "I am honored and extremely excited to take on this new responsibility," says van Hooydonk.
Bruce Meyers, the Meyers Manx and 50 years of unfinished business
Wed, 14 May 2014They left the staging area at 1 in the morning. The Manxter Dual Sport dune buggy was holding by faith alone -- it had been repaired over and over again, parts tied or taped together, seldom replaced; covered in the acrid dust of the desert, a dust that fills your lungs and face, a dust that worms its way into the cabin and across every surface. The GPS navigation was out.