Up for auction is a brand new snap on digital multimeter.EEDM503D The price for this is $161.45 from snap on.
Standard Accessories
2 Amp Ceramic, UL Fuse (EEDM503B2)
10 Amp Ceramic, UL Fuse (EEDM504B2)
Test Lead Set with Alligator Clips (EEDM504B3)
Rubber Boot (EEDM504D1)
Soft Pouch (EEDM504B4)
Instruction Manual (ZEEDM503D)
9-volt Battery
General Specifications
Max. Voltage between any Input and Ground: 1000V
Fuse Protection mA: 2Amp/600VAC
Fuse Protection A: 10Amp/600VAC
Display Type: 2000 Count
Operating Temperature: -0° to 40°C (32° to 104°F)
Storage Temperature: -10° to 50°C (14° to 122°F)
Relative Humidity: 0% to 80%
Power Supply: 9 Volt Battery
Battery Life: 560 hrs. Alkaline
Size (H x L x W): 1.5" x 3.75" x 7.7" (38.1mm x 95.25mm x196.85mm)
Weight: 24 oz. (680 grams)
Features:
• LCD DISPLAY - Large, Easy-to-read, 2000 count LCD display.
• ON/OFF PUSH BUTTON - Push to turn the EEDM503C on and off.
• OHM - Measure Ohms to determine resistance of a coil or spark plug wire.
• CONTINUITY BUZZER - Test continuity of fuses, fusible links, components and circuits.
• DIODE TEST - Use the diode function to test the diode pack on a typical alternator.
• DC AMPS - Measure DC current to determine the presence of a parasitic load. Measure current draw of branch circuits.
• DATA-H (Data Hold) - Lock reading on the display in hard to read locations or for future reference.
• DC VOLTS - Use DC voltage to verify if the proper voltage level is arriving at a sensor of circuit.
• AC VOLTS - Measure AC voltage signals on digital MAF sensors, wheel speed sensors and vehicle speed sensors.
• AC AMPS - Measure the current draw of AC powered equipment in the shop.
• TILT STAND - Is built-in into the instrument housing.
• SEPARATE FUSE/BATTERY COMPARTMENT - Is easily removed for battery/fuse replacement. Fuses are labeled with replacement number. Product Specifications
Stock # EEDM503D
Name Multimeter, Digital, Advanced, Manual Ranging
Price** $161.45
Brand Snap-on
AC Amps 10
AC Volts 750
Dimensions, inches 7 3/4 x 3 3/4 x 1 1/2
Display Count 2,000
Basic DC Accuracy 0.50%
DC Amps 10
DC Volts 1,000
RPM EEDMRPMG
Resistance, ohms 20M Ohm
UL Listed cULus 61010-1
Temperature EEDM506C
Micro Amps Yes
Insulation Test No
Data Hold Yes
CAT Rating CATII 750 V AC, CATII 1,000 V DC, CATIII 600 V AC/DC
Easy Open Battery and Fuse Door Yes
Blown Fuse Identifier Yes
Replacement Fuses EEDM5O3B2 EEDM504B2.
Posted with eBay Mobile
Diagnostic Tools / Equipment for Sale
- equus 3030 innova diagnostic code reader vw ford ranger mazda jaguar xj8 xkr (US $29.99)
- 5m cable endoscope 3.5" lcd pipe car borescope inspection camera 4x zoom rotate(US $146.90)
- Sunpro by actron code scanner car computer code reader: domestic gm 1982(US $29.89)
- Autel maxidas ds708 obd i & ii diagnostic scanning tool!!(US $849.99)
- Craftsman sears engine analyzer solid state electronic 161.216300 clean works(US $3.50)
- Compression test kit(US $15.00)
Lamborghini Jota spotted
Sun, 29 Aug 2010The Lamborghini Jota snapped on the Autobahn The last news we had on the Lamborghini Jota - Lambo’s replacement for the now quite ancient Murcielago – was a pointless tease for the Jota sent to us in July by Lamborghini with a photo of a Lamborghini bonnet in half shadow replete with Lamborghini badge. Oh, and the highly original strapline: Coming Soon… Which we knew. We’ve been reporting on the Jota for quite some time (and on the halo Lamborghini we expect it to spawn – the Lamborghini Urus) so there are likely no huge surprises – except just how it’s going to look.
Inside look at the Lexus LF-LC concept: Video
Mon, 30 Jan 2012Lexus has released an inside look at its latest concept vehicle, the LF-LC 2+2 hybrid sport coupe. The LF-LC was revealed at the 2012 Detroit auto show. The video includes interviews with designers from Calty Design Research, Toyota's U.S.
GT supercar designer leaving Ford
Thu, 15 Jan 2009Designer Camilo Pardo, credited with drawing the Ford GT supercar, is leaving the automaker after a 24-year career with the company. Pardo, 45, confirmed to AutoWeek that he is leaving Ford, but he declined to give details. He said final details of his departure have yet to be worked out.