Sound Control Deadener Car Insulation Extreme Noise Killer 100% Quality 22 Mats on 2040-parts.com

Shumoff L2

Vibro-absorbing multilayer material. It is used for the noise abatement of the metal and plastic surfaces to soundproof car interiors, farming machinery and other objects.

Thickness    2 mm / 0.08" 

 

Vibro-absorbing, multilayer, self-adhesive material. Mostly used for the vibration absorption and sound deadening in the car interior, it is stuck to the metal, plastic panels with thickness up to 1 mm – doors and roof of a car.

Facing layer – flexible and strong aluminum foil that increases soundproof properties of the material and also provides the mechanical protection. The impression has the form of the grid with the jutting out foursquare. This particular form as opposed to standard embossing ensures a higher soundproof level and additional rigidity and makes the process of cutting easier.

The layer of the red-orange color is a high-filled low-weight composite material based on caoutchouc. It has  high-level vibro-absorbing properties and additionally protects the car body against corrosion; possesses permanent adhesiveness and high elasticity. The paste layer is resistant to environmental factors including moisture and temperature fluctuations. Working temperature range is from -60^оC to +140^оC, short-term exposure to high temperatures +160^оC is possible when the material retains its structural and physical properties. During installation, a sheet of the material must be rolled down to the base for the final positioning.

The paste layer’s mounting surface is secured with the release paper, which needs to be removed just before the installing of the material. On the release-layer surface there is a logo acting as a counterfeit protection and a ruling that makes cutting and installing easier. Due to high-quality release paper, the manufacturer guarantees adhesive properties retention for 12 months since the production date. After installation, working lifespan is not limited and corresponds to the useful life of a car or any other object providing abidance by the rules of installation and service instructions.

Our material is produced as a sheet in size 320x270 mm. This sheet format ideally matches car body parts as it decreases the amount of waste materials significantly and increases the installation speed, and the whole process of soundproofing becomes easier. Finished products are packed into the cardboard envelopes or cartons. Due to the sheet’s size and packaging format, it is very easy and convenient to transport, store and use our material.

 

Specification:

Length	370mm / 1.21 ft
Width	270mm / 0.89 ft
Thickness	2-2,2mm / 0.08-0.09" / 79-86mil
Weight	0.48 lb of a mat / 10.5 lb the weight of the entire purchase
Material-to-metal bond strength during ply separation, N/cm	5,0
Material resistance to exposure to 100оC temperature for 12 hours	Absence of the material layer separation from the metal plate
Flammability	Non-flammable
Water absorption capacity	0,3