Suzuki Turn Signal Signals Sv Gsx650f Gsxr Drz Gsf Bandit #3 on 2040-parts.com

You are bidding on one Suzuki turn signal that will fit a huge variety of Suzuki motorcycles. I listed all the bikes it will fit in the compatibility section, which I got from looking at the parts fiche for each bike between 2000 and 2012. Ebay wouldn't allow me to insert some of the newer models because it wasn't in their compatibility list, so if you have a newer bike that's not listed, just look at the signal to make sure the base will fit into your fairing/cowl/frame. Keep in mind that some of the bikes have the same base but different lens designs (color), stalk length (rubber neck), or wiring length, which means these will fit but won't match stock design (so buy 4 to have a matching set). Verify stalk similarity by counting the amount of grooves. Also, you can message me to help with compatibility verification.

This particular signal's qualities are:

• Standard stalk length for this lens design. 3 Ridges.
• Shorter threaded shaft (see pictures, the part that the nut threads onto). This will not fit the SV rear fender, or any other application that requires the longer shaft. The longer shafts have a long, non-threaded portion that is easily noticeable.

The bulb and socket are included. However, the plastic base is not. I have some different bases in stock. If you need it, please message me with your bike's make, model, and year, and I'll see if I have your base. I'll include it at no charge if I have it. The plastic base may or may not be needed for your application. Everything pictured is included.

DETAILED DESCRIPTION: I have quite a few of these listed for sale, but took photographs of each one. The one you see here is the one you're buying. Looking at this in my hand now, the black body is in great condition. The numbers have been worn off. On the non-notched side, there appears to be some lines that look like a wipe of armor all would cover up, but I'm not going to try because I'm not trying to hide any damage in my auctions (see picture 4, in which the flash makes them stand out substantially more than what I can see). As well in picture 4, you can see on the back face (screw side), there is a scuff/rub along with a few scratches. The neck has a scratch about 1/32 inch long on the non-notched side, and the notched side of the neck has a couple 1/32 inch long scratched grouped together on the edge/ridge (back side). I almost missed them they're so small. As for the lens, it still has its high gloss appearance, but there are some dirt spots that you can see in the pictures which are all around the lens. Soap and water did not remove them, so I'm assuming a solvent is necessary. Overall, I give this signal a used rating of 7.5/10.

PLACEMENT: It will fit any signal location on compatible bikes, but the water drain notch is on the numbered side (missing numbers), so if your a stickler for putting the notch on the bottom, then you'll want to put it either on the right front or the rear left (left/right is if you were sitting on the bike). Every Suzuki signal of current design, since at least 2001 as far as I know, has these water drain notches.

Guaranteed to meet its description or your money back. If you are purchasing multiple items from me, please buy them and then request an invoice with the total shipping cost. Please wait to pay until you receive the new invoice.

Please check shipping details for cheaper shipping options, if you prefer. If you want shipping insurance added, request an invoice with insurance added to shipping. If USPS first class is selected, the signal will be shipped in a padded envelope unless otherwise requested. Note that a box weighs more and thus will cost more in USPS first class mail.

Attention international buyers (this paragraph applies to international buyers only): I haven't encountered any fees for shipping internationally yet, as I have only shipped to Australia, Sweden, France, Uruguay, Canada and Brazil. However, if any fees of any sort arise for shipping to your country, you are responsible for them. Also, if you choose first class mail (international only), you will not have any tracking information once it leaves the United States, and therefore I can not be liable for any packages that do not arrive. However, keep in mind the tracking number will show that I dropped it off into the United States Postal Service hands, and thus they should be held accountable if any issue arises. Note that I have shipped first class mail internationally 8+ times so far, and have yet to have a problem.

Shipping information follows below this line. It's information given to save you money, but you don't need to read it as it is a general description and isn't specific to this auction.

Shipping USPS First Class: USPS First Class Mail is the cheapest for turn signals since they are under 13 ounces for domestic shipping and 4 pounds for international shipping. I highly recommend it as it is, to me, equivalent to priority mail. I have had it go from me in Mississippi to someone in California in 2 days. It's fast and it's cheap.

Shipping Regional Rate A, B, and C (USA only): A commonly unknown flat-rate method through USPS, Ebay has recently added this option. The availability depends on your location versus mine. It is significantly cheaper and is considered priority mail by USPS (last I checked). If you are buying multiple signals from me, this will most likely be your cheapest shipping option. Sadly, Ebay hasn't included it in available options in the auctions, but it can be selected when I process the shipping label. Simply send me an invoice request noting you want to see if you can use Regional Rate flat-rate shipping, and I'll get back to you with the price and total.

Seller's Note: Turn Signal #3