Find or Sell any Parts for Your Vehicle in USA
Car & Truck Parts > Turbos, Nitrous, Superchargers > Turbo Chargers & Parts

T04e 14p T3/t4 Turbo Kit Bolt-on Intercooler+cast Manifold D15/d16 Civic/del Sol on 2040-parts.com

Location:

Rowland Heights, California, United States

Rowland Heights, California, United States
T04E 14P T3/T4 TURBO KIT BOLT-ON INTERCOOLER+CAST MANIFOLD D15/D16 CIVIC/DEL SOL, image 1
Condition:New Brand:Speed Daddy Part Brand:speed_daddy Manufacturer Part Number:TBKSDDT04E63+TMDC38HC14 Sedan Hatchback Instruction Included:No Interchange Part Number:Coupe UPC:DOES NOT APPLY

Wheel Hub Quick Release, Racing Seat Combos items in Speed Daddy Com store on eBay!
T04E 14P T3/T4 TURBO KIT BOLT-ON INTERCOOLER+CAST MANIFOLD D15/D16 CIVIC/DEL SOL
Top Seller, Product & Service! Fast & Easy Shipping!
557.88

STORE CATEGORY
NEWSLETTER!
Add my Store to your Favorites and receive my email newsletters about new items and special promotions!

General Interest
WE ACCEPT
T04E 14P T3/T4 TURBO KIT BOLT-ON INTERCOOLER+CAST MANIFOLD D15/D16 CIVIC/DEL SOL
Description


    High Compression/ Boosting T04E Turbocharger

    The objective of a turbocharger is to improve the engine's volumetric efficiency by solving one of its cardinal limitations. A naturally aspirated automobile engine uses only the downward stroke of a piston to create an area of low pressure in order to draw air into the cylinder through the intake valves. The pressure in the atmosphere is no more than 1 atm (approximately 14.7 psi), so there ultimately will be a limit to the pressure difference across the intake valves and thus the amount of airflow entering the combustion chamber. Since the turbocharger increases the pressure at the point where air is entering the cylinder, a greater mass of air (oxygen) will be forced in as the inlet manifold pressure increases. The additional air flow makes it possible to maintain the combustion chamber pressure and fuel/air load even at high engine revolution speeds, increasing the power and torque output of the engine.


    Specifics and Benefits:

  • Capable of Boosting Horse Power up to 300+ BHP
  • High Quality Material, Cast Housing with Durable Steel

    Exhaust (Turbo Manifold) Flange:Standard T3/ T4 4-Bolt
    Exhaust (Downpipe) Flange:Standard T3 5-Bolt
    Intake Inlet/ Outlet:3.00"/ 2.00"

    Compressor:
    Trim:55
    A/R:.50
    Inducer:50.50
    Exducer:76.00
    Turbine:
    Trim:73
    A/R:.63
    Inducer:65.50
    Exducer:55.90

    High Performance Cast Iron Exhaust Tubro Manifold

    The heart of any turbo system is the manifold and the turbocharger. These form the basis where the rest of the turbo system is built around. There is no match for durability and strength for cast turbo manifolds. Cast manifolds are more durable over long periods of constant heat cycles like daily driving. Cast turbo manifolds offer short runners resulting in quicker spooling for whatever turbocharger is being used. The shorter runners of the cast manifolds take up little space so that it is possible to keep accessory components, such as air conditioning and power steering, of your engine intact.


    Specifics and Benefits:

  • High Performance Turbo Racing Design
  • Made of High Quality Cast Iron Material for Strength and Durability
  • Computerized Mandrel-Bended to Maximize Air Flow Smoothness
  • TIG Welded CNC Machined Flange for Resistance against Cracking and Wearing
  • Increase Engine Exhaust Output and Efficiency
  • 38mm/ 35mm External Wastegate Port and Flange Included
  • Standard T3/ T4 Configuration Outlet


    Lightweight Aluminum Bolt-On Front-Mount Intercooler

    When the charged air enters the end tank, it travels through the tubes of an Intercooler, in which the heat is transferred via fins, where cooler ambient air passes over the tubes. This mechanism further removes heat from air before exiting the opposite end tank and routing to the engine.

    Bar and Plate Intercooler functions identically to the Tube and Fin Core, with the exception that, charged air travels through its rectangular shaped passages, which have more surface area; thus, improves cooling effect and power of the charged air. The advantage of this type of intercoolers is that, since the bar and plate core affords up to 35% larger surface area for cooling, a physically smaller intercooler can be used and still retains the cooling efficiency of a larger tube and fin design. This is important for a builder who has a vehicle with a compact opening in the front of it or when there are immovable obstructions present.


    Specifics and Benefits:

  • High Performance Bar and Plate Turbo Racing Design
  • Made of High Quality T-6061 Aluminum Durable Material
  • Helps Reducing Engine Inlet Temperature
  • Allow More Horsepower at the Same Boost Level and Even More Power at the Higher Boost Level
  • Intercooler Size: 27.00” (L) X 6.25" (H) X 3.50" (W)
  • Core Size: 17.50" (L) X 6.25" (H) X 3.50" (W)
  • Inlet/ Outlet: 2.25"/ 2.25”
  • Direct Bolt-On Front-Mount Installation; Easy to Install


    • Bolt-On Aluminum Intercooler Piping

    Specifics and Benefits:

  • Made of High Quality T-6061 Lightweight Aluminum Piping
  • 2.50" Piping Diameter
  • Increase 65% Air Flow comparing with other Standard Piping



    • Lightweight Stainless Steel Down Pipe

    Down Pipes eliminate the stock catalytic converter and reduce exhaust backpressure. By maximizing exhaust flow, this downpipe allows the turbo to spool up and build boost quicker. The result brings out the vehicle’s performance potential by giving it a free high flowing exhaust system.


    Specifics and Benefits:

  • Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends
  • i.e. Maximizing Smoothest Exhaust Airflow; Instantly Gains 10-15 HPs
  • Inlet/ Outlet Sizes: 2.50”/ 2.50”
  • Piping Diameter: 3.00" with Welded Flex Pipe
  • Direct Bolt-On Installation, O2 Sensor Bung Insertion; Requires NO Modification



    • Universal 35mm/ 38mm Wastegate with Spring

    Specifics and Benefits:

  • High Strength Cast Steel Body with Steel Head
  • Comes with 8-PSI Spring Installed


    Type-S Adjustable Aluminum Billet Blow Off Valve BOV

    Specifics and Benefits:

  • Billet Aluminum Body
  • 8 Discharge Ports That Draw In Surrounding Air and Release a Unique Discharge Sound
  • 40mm, Hard-Anodized Valve for Increased Airflow
  • Dual Spring System Promoted Response and Allows for High Boost Pressures
  • Holds Up to 30 PSI Boost Pressure
  • Aggressive JDM Racing Discharge Sound


    Aluminum 2.5” Flange Pipe

    Specifics and Benefits:

  • Made of High Quality T-6061 Aluminum, Lightweight, Heat-Persistent Design
  • 2.5" Pipe Size



    • 30 PSI Turbo Boost Controller

    Specifics and Benefits:

  • CNC Machined Aluminum Body
  • 1-30 PSI Adjustable


    Universal Box Style Programmable LED Turbo Timer

    Specifics and Benefits:

  • Allows the Vehicle to Idle the Engine, for the Timed Period, with the Ignition Key Removed
  • Auto Mode - Precise Calculation of Cool Down Period to Ensure Proper Cool Down of Turbo-Charged Engine.
  • Digital Display - Allowing Clear Vision during Day & Night Time.



    • 3.00” Universal Mushroom Type Air Filter

    This filter provides a high volume flow of clean and cooler free air into the engine, extending its life, while raising the fuel mileage in the process meanwhile.

    Specifics and Benefits:

  • Made of Reinforced Material and Covered with Chromed Finish for Lightweight and Durability
  • 3.00” Filter Inlet, 3.00" Inner Diameter Pipe
  • Performance: Improves Up to 95% Filtration Efficiency
  • Micro High Density Foam Gauze Type Filter Material, Washable with Water or Soap, and Reusable


    Universal Braided Stainless Steel 10AN Oil Drain Line

    Specifics and Benefits:

  • Stainless Steel Braided Hose 1/2" Inner Diameter 20.00" Length
  • 10AN Fittings Anodized Finish
  • Weldable 10AN Oil Pan Fitting Included



    • Stainless Steel Braided Oil Feed Line

    Specifics and Benefits:

  • Made of High Quality Stainless Steel Hose
  • 10AN Fittings Anodized Ends
  • Inner Diameter: 0.25"
  • Length: 36.00"
  • 1/8 NPT Fittings Natural Polish Finish


    High Tolerance Manifold Wrap

    Specifics and Benefits:

  • Made of High Quality Synthetic Fabric Material
  • Tested to Tolerate Extreme Heat and Wearing Corrosions


    100% Brand New

    • Professional Installation is Highly Recommended (No Instruction Included)



    Package Includes:

  • 1 X T04E Turbocharger
  • 1 X Cast Iron Turbo Manifold
  • 1 X External Cast Steel Wastegate WG
  • 1 X B-/D-Series 3” Inlet/ Outlet Downpipe
  • 1 X Type-S Blow Off Valve Kit
  • 1 X Flange Pipe
  • 1 X Adjustable Boost Controller
  • 1 X Programmable LED Turbo Timer
  • 1 X Mushroom Type Air Filter
  • 1 X Oil Drain Line Kit
  • 1 X Manifold Wrap
  • 1 X Braided Oil Feed Line
  • 1 X Lightweight Aluminum Intercooler
  • 1 X Set of Bolt-On Aluminum Piping

    4-Piece Piping Set Includes:

  • 4 X Aluminum 2.5" Pipings
  • 5 X Silicone Hoses
  • 10 X Bolt-Tight Clamps
  • Hardware, such as Flanges, Clamps Gaskets and Bolts, as Shown in the Picture Above


    Compatible with:

  • 1992 - 1995 Honda Civic - EG, EH, EJ1, EJ2
  • 1996 - 2000 Honda Civic - EJ6, EJ7,EJ8, EJ9, EM1
    (Except 99-00 Si Models)
  • 1993 - 1997 Honda Del Sol - EG1, EG2, EH1, EH6
    (Except VTEC Models)

    Requires Minor Modification:
  • 1988 - 1991 Honda Civic - EC, ED, EE, EF
  • 1988 - 1991 Honda CR-X - D15/ D16/ B16/ B18

    (ALL Models Above with a 1.5/ 1.6L I4 D-Series SOHC Engine ONLY)

  • Please Check Compatibilities for Exact Years and Models


    Modification might be Required for Some Vehicles


Related Products
DOMESTIC LOWER 48 US STATES:



SALES TAX:		 FREE



CA ONLY
VERY IMPORTANT:
Double check shipping address. We are not responsible for incorrect or undeliverable addresses.

Please use Shipping & Payments tab on top of page for shipping details for your location.

Shipping to PR, HI, AK and PO Box addresses will be charged the same as shipping to Canada. GU, VI, SAIPAN will be charged the same as international shipping rate.

For Canada shipping please select the lowest price. We do not offer expedited shipping.

US Territories such as GU, VI, SAIPAN will be charged the same as international shipping rate. Transaction will be held until a full shipping amount received.

Some of the packages cannot be delivered to a PO Box. Customer is responsible to ensure PO Box address given is deliverable by the shipping company. Package will be held until a valid physical address is provided.

Customer assumes shipping charges incurred in shipping to undeliverable address.

International buyers are responsible for all customs duties, taxes, and other applicable fees incurred by the country's customs/border regulations. Please contact customs for more information.

We ship 98% of all orders the same or next business day after payment received/cleared. Please understand that once orders are shipped, we cannot control the transit times thereafter. Most orders will ship via USPS First Class/Priority Mail or FedEx/UPS or the best suitable carrier for the specific size of the product.

We are not responsible for any changes to address after item has been shipped.

Turbo Chargers & Parts for Sale

Hyundai i-oniq: New Hyundai concept at Geneva 2012

Thu, 15 Dec 2011

Hyundai i-oniq Concept - Geneva bound Hyundai has revealed a single teaser image of a new concept they will take to the 2012 Geneva Motor Show – the Hyundai i-oniq. What are we to make of the Hyundai i-oniq Concept? Probably, we’re supposed to speculate as to exactly what it could be, as Hyundai aren’t interested in telling us much about it yet.

Canada urged to adopt European car safety standards

Mon, 23 Dec 2013

CANADA has been urged to adopt European standards for new vehicle safety by the president of Mercedes-Benz Canada. Tim Reuss told reporters that if EU rules, which apply to all cars built by European industrial powerhouses like Mercedes and the Volkswagen Group, were in place Canada would already have new, more efficient, safer cars. At present Mercedes cannot import the A-Class because of the expense associated with modifying it to conform to Canadian safety requirements, and Mr Reuss argues that the current approach lacks common sense.

Land Rover Discovery 4 Armoured revealed

Mon, 20 Dec 2010

Land Rover Discovery 4 Armoured - Can you tell? It’s not a particularly nice world we live in. Especially if you happen to be in a powerful position in business or politics.

2040Parts.com © 2012-2024. All Rights Reserved.

Designated trademarks and brands are the property of their respective owners.

Use of this Web site constitutes acceptance of the 2040Parts User Agreement and Privacy Policy.

0.064 s, 11706 u