Find or Sell any Parts for Your Vehicle in USA
Car & Truck Parts > Turbos, Nitrous, Superchargers > Turbo Chargers & Parts

T04e 24pc T3/t4 Turbo Kit Bolt-on Intercooler+manifold B16/b18 Civic/del Sol/dc2 on 2040-parts.com

Location:

Rowland Heights, California, United States

Rowland Heights, California, United States
T04E 24PC T3/T4 TURBO KIT BOLT-ON INTERCOOLER+MANIFOLD B16/B18 CIVIC/DEL SOL/DC2, image 1
Condition:New Brand:Speed Daddy Part Brand:speed_daddy Manufacturer Part Number:TBKSDDT04E63+TMBS38324 Sedan Hatchback Instruction Included:No Interchange Part Number:Coupe UPC:DOES NOT APPLY

Wheel Hub Quick Release, Racing Seat Combos items in Speed Daddy Com store on eBay!
T04E 24PC T3/T4 TURBO KIT BOLT-ON INTERCOOLER+MANIFOLD B16/B18 CIVIC/DEL SOL/DC2
Top Seller, Product & Service! Fast & Easy Shipping!
837.88

STORE CATEGORY
NEWSLETTER!
Add my Store to your Favorites and receive my email newsletters about new items and special promotions!

General Interest
WE ACCEPT
T04E 24PC T3/T4 TURBO KIT BOLT-ON INTERCOOLER+MANIFOLD B16/B18 CIVIC/DEL SOL/DC2
Description


    24-Pieces T04E Honda B-Series Turbo Kit


    High Compression/ Boosting T04E Turbocharger

    The objective of a turbocharger is to improve the engine's volumetric efficiency by solving one of its cardinal limitations. A naturally aspirated automobile engine uses only the downward stroke of a piston to create an area of low pressure in order to draw air into the cylinder through the intake valves. The pressure in the atmosphere is no more than 1 atm (approximately 14.7 psi), so there ultimately will be a limit to the pressure difference across the intake valves and thus the amount of airflow entering the combustion chamber. Since the turbocharger increases the pressure at the point where air is entering the cylinder, a greater mass of air (oxygen) will be forced in as the inlet manifold pressure increases. The additional air flow makes it possible to maintain the combustion chamber pressure and fuel/air load even at high engine revolution speeds, increasing the power and torque output of the engine.


    Specifics and Benefits:

  • Capable of Boosting Horse Power up to 300+ BHP
  • High Quality Material, Cast Housing with Durable Steel

    Exhaust (Turbo Manifold) Flange:Standard T3/ T4 4-Bolt
    Exhaust (Downpipe) Flange:Standard T3 5-Bolt
    Intake Inlet/ Outlet:3.00"/ 2.00"

    Compressor:
    Trim:55
    A/R:.50
    Inducer:50.50
    Exducer:76.00
    Turbine:
    Trim:73
    A/R:.63
    Inducer:65.50
    Exducer:55.90

    High Performance Tubular Exhaust Turbo Manifold

    The heart of any Turbo system is the Manifold and the Turbocharger. These form the basis where the rest of the turbo system is built around. Turbo manifolds have only one, but the most critical purpose in turbo systems, and that purpose is to expel exhaust gas into the turbine of a turbocharger as efficiently as possible.

    There is no match for power and performance for tubular stainless steel manifolds. Tubular manifolds are made up of runners coming from each cylinder, meeting up at a collector. Tubular manifolds yield a higher efficiency rate, as each runner is generally the same circumference. This allows for a much smoother flow of exhaust gas to the turbo.

    Tubular stainless steel manifolds are chosen over cast manifolds for big power applications. Tubular stainless manifolds feature better and more consistent flow of exhaust gases. Most of the tubular Stainless manifolds also feature the placement of the wastegate flange towards the middle of the collector to allow accurate readings and precise control.


    Specifics and Benefits:

  • High Performance Tubular Turbo Racing Design
  • Made of High Quality T-304 Polished Stainless Steel Alloy Material for Strength and Durability
  • Tubular Design to Ensure Equivalent Exhaust Flow Rate from each Cylinder
  • Computerized Mandrel-Bended to Maximize Air Flow Smoothness
  • TIG Welded CNC Machined Flange for Resistance against Cracking and Wearing
  • Increase Engine Exhaust Output and Efficiency
  • 38mm/ 35mm External Wastegate Port and Flange Included
  • Standard T3/ T4 Configuration Outlet



    • Lightweight Aluminum Bolt-On Front-Mount Intercooler

    When the charged air enters the end tank, it travels through the tubes of an Intercooler, in which the heat is transferred via fins, where cooler ambient air passes over the tubes. This mechanism further removes heat from air before exiting the opposite end tank and routing to the engine.

    Bar and Plate Intercooler functions identically to the Tube and Fin Core, with the exception that, charged air travels through its rectangular shaped passages, which have more surface area; thus, improves cooling effect and power of the charged air. The advantage of this type of intercoolers is that, since the bar and plate core affords up to 35% larger surface area for cooling, a physically smaller intercooler can be used and still retains the cooling efficiency of a larger tube and fin design. This is important for a builder who has a vehicle with a compact opening in the front of it or when there are immovable obstructions present.


    Specifics and Benefits:

  • High Performance Bar and Plate Turbo Racing Design
  • Made of High Quality T-6061 Aluminum Durable Material
  • Helps Reducing Engine Inlet Temperature
  • Allow More Horsepower at the Same Boost Level and Even More Power at the Higher Boost Level
  • Intercooler Size: 27.00” (L) X 6.25" (H) X 3.50" (W)
  • Core Size: 17.50" (L) X 6.25" (H) X 3.50" (W)
  • Inlet/ Outlet: 2.25"/ 2.25”
  • Direct Bolt-On Front-Mount Installation; Easy to Install


    • Bolt-On Aluminum Intercooler Piping

    Specifics and Benefits:

  • Made of High Quality T-6061 Lightweight Aluminum Piping
  • 2.50" Piping Diameter
  • Increase 65% Air Flow comparing with other Standard Piping



    • Lightweight Stainless Steel Down Pipe

    Down Pipes eliminate the stock catalytic converter and reduce exhaust backpressure. By maximizing exhaust flow, this downpipe allows the turbo to spool up and build boost quicker. The result brings out the vehicle’s performance potential by giving it a free high flowing exhaust system.


    Specifics and Benefits:

  • Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends
  • i.e. Maximizing Smoothest Exhaust Airflow; Instantly Gains 10-15 HPs
  • Inlet/ Outlet Sizes: 2.50”/ 2.50”
  • Piping Diameter: 3.00" with Welded Flex Pipe
  • Direct Bolt-On Installation, O2 Sensor Bung Insertion; Requires NO Modification



    • Universal 35mm/ 38mm Wastegate with Spring

    Specifics and Benefits:

  • High Strength Cast Steel Body with Steel Head
  • Comes with 8-PSI Spring Installed


    Type-S Adjustable Aluminum Billet Blow Off Valve BOV

    Specifics and Benefits:

  • Billet Aluminum Body
  • 8 Discharge Ports That Draw In Surrounding Air and Release a Unique Discharge Sound
  • 40mm, Hard-Anodized Valve for Increased Airflow
  • Dual Spring System Promoted Response and Allows for High Boost Pressures
  • Holds Up to 30 PSI Boost Pressure
  • Aggressive JDM Racing Discharge Sound


    Aluminum 2.5” Flange Pipe

    Specifics and Benefits:

  • Made of High Quality T-6061 Aluminum, Lightweight, Heat-Persistent Design
  • 2.5" Pipe Size



    • 30 PSI Turbo Boost Controller

    Specifics and Benefits:

  • CNC Machined Aluminum Body
  • 1-30 PSI Adjustable


    Universal Box Style Programmable LED Turbo Timer

    Specifics and Benefits:

  • Allows the Vehicle to Idle the Engine, for the Timed Period, with the Ignition Key Removed
  • Auto Mode - Precise Calculation of Cool Down Period to Ensure Proper Cool Down of Turbo-Charged Engine.
  • Digital Display - Allowing Clear Vision during Day & Night Time.



    • Universal Adjustable Fuel Pressure Regulator

    Specifics and Benefits:

  • Adjustable from (1-15) psi to 140 Maximum Fuel Pump Capacity
  • Improves Fuel Delivery Efficiency and Prevents Fuel Starvation for More Consistent Boost and Fuel Flow
  • Designed to Maintain the Optimal Fuel Rail Pressure for High Performance/ Turbocharged Engine
  • Delivers Vehicles’ Highest Performance, with Long Life and Highly Reliable Operation
  • Comes with Hose, Bolts, Connectors and Installation Kits



    • Universal Voltage Stabilizer/ Regulator

    Specifics and Benefits:

  • Improves Ignition Flow and Strengthens Starting Power
  • Stabilizes Voltage, Improves Engine Performance
  • Specially Designed with High Water and Heat Resistance



    • Universal 17-Row 32mm 10 AN Oil Cooler

    Specifics and Benefits:

  • Usable to Cool Down Engine Oil, Transmission, and Rear-Differentials
  • Made with High Quality T-6061 Aluminum
  • Potentially Reduces Oil Temperature up to 50°F
  • Overall Size: 10.25" x 10.50" x 2.00"
  • Core Size: 7.50" x 9.00" x 1.25"
  • Inlet / Outlet Size: 10 AN



    • Oil Filter Relocation and Oil Line Kits

    Specifics and Benefits:

  • Made of High Quality Lightweight Aluminum with CNC Laser Cut
  • Increases Engine Oil Capacity Available; thus, Enhances Oil Lubrication and Protection of Engines
  • Oil Filter Relocation for Easier Access and Oil Change; a Must for Hard-To-Reach Oil Filters
  • 10-AN Male Fitting and 0.875” x 12.125” Bolt Pattern



    • Billet Aluminum Oil Catch Tank

    Specifics and Benefits:

  • Clear Tube Indicator for Easy Visual of Checking if the Tank is Full
  • Ensure Better Mileage, Better Performance and Preserve Engine Life
  • Catch Oil and Sludge to Save the Life of the Engine



    • Universal 3-Port Gauge/ Meter Dash Pod

    Specifics and Benefits:

  • Dimensions: 9.25” (Length) X 4.50” (Width) X 3.00” (Height)
  • Flatten Bottom Surface for Easy Direct Hood Mount or Stick Mount
  • 2.0625” (Diamter) X 2.50" (Depth) Pods



    • Universal Smoke-Tinted Turbo Boost + Oil Temperature + Water Temperature Gauges

    Specifics and Benefits:

  • Enchanting 7-Color LED Display, to Match Interior Lightings at its Best
  • Stylish Smoke-Tinted Screens
  • 2” Gauge Diameter for 12V Power Source



    • Universal Aluminum Radiator Water Temperature Gauge Adaptor

    Specifics and Benefits:

  • Made of High Quality Light Weight Aluminum Material
  • Port Diameter: 38mm/ 1.50"
  • Overall Dimensions: 2.75" (Length) X 2.25" (Height)
  • Sensor Port Thread Pitch and Diameter: 1/8 NPT/ 6AN



    • 3.00” Universal Mushroom Type Air Filter

    Specifics and Benefits:

  • Made of Reinforced Material and Covered with Chromed Finish for Lightweight and Durability
  • 3.00” Filter Inlet, 3.00" Inner Diameter Pipe
  • Performance: Improves Up to 95% Filtration Efficiency
  • Micro High Density Foam Gauze Type Filter Material, Washable with Water or Soap, and Reusable


    Universal Braided Stainless Steel 10AN Oil Drain Line

    Specifics and Benefits:

  • Stainless Steel Braided Hose 1/2" Inner Diameter 20.00" Length
  • 10AN Fittings Anodized Finish
  • Weldable 10AN Oil Pan Fitting Included



    • Stainless Steel Braided Oil Feed Line

    Specifics and Benefits:

  • Made of High Quality Stainless Steel Hose
  • 10AN Fittings Anodized Ends
  • Inner Diameter: 0.25"
  • Length: 36.00"
  • 1/8 NPT Fittings Natural Polish Finish


    High Tolerance Manifold Wrap

    Specifics and Benefits:

  • Made of High Quality Synthetic Fabric Material
  • Tested to Tolerate Extreme Heat and Wearing Corrosions


    100% Brand New

    • Professional Installation is Highly Recommended (No Instruction Included)



    Package Includes:

  • 1 X T04E Turbocharger
  • 1 X Stainless Steel Turbo Manifold
  • 1 X External Cast Steel Wastegate WG
  • 1 X B-/D-Series 3” Inlet/ Outlet Downpipe
  • 1 X Type-S Blow Off Valve Kit
  • 1 X Flange Pipe
  • 1 X Adjustable Boost Controller
  • 1 X Programmable LED Turbo Timer
  • 1 X Adjustable Fuel Pressure Regulator
  • 1 X Universal Voltage Stabilizer
  • 1 X 17-Row 10AN Aluminum Oil Cooler
  • 1 X Oil Filter Relocation Kit
  • 3 X Oil Lines
  • 1 X Aluminum Oil Catch Tank
  • 1 X Universal Turbo Boost Gauge
  • 1 X Universal Oil Temp. Gauge
  • 1 X Universal Water Temp. Gauge
  • 1 X Universal 52mm Gauge/ Meter Pods
  • 1 X Aluminum Radiator Water Temperature Gauge Adaptor
  • 1 X Mushroom Type Air Filter
  • 1 X Oil Drain Line Kit
  • 1 X Manifold Wrap
  • 1 X Braided Oil Feed Line
  • 1 X Lightweight Aluminum Intercooler
  • 1 X Set of Bolt-On Aluminum Piping

    4-Piece Piping Set Includes:

  • 4 X Aluminum 2.5" Pipings
  • 5 X Silicone Hoses
  • 10 X Bolt-Tight Clamps
  • Hardware, such as Flanges, Clamps Gaskets and Bolts, as Shown in the Picture Above


    Compatible with:

  • 90-01 Acura Integra
  • 99-00 Honda Civic Si
  • 94-97 Honda Del Sol VTEC

    (ALL Models Above with an I4 B-Series DOHC Engine ONLY)

  • Please Check Compatibilities for Exact Years and Models


    Modification might be Required for Some Vehicles


Related Products
DOMESTIC LOWER 48 US STATES:



SALES TAX:		 FREE



CA ONLY
VERY IMPORTANT:
Double check shipping address. We are not responsible for incorrect or undeliverable addresses.

Please use Shipping & Payments tab on top of page for shipping details for your location.

Shipping to PR, HI, AK and PO Box addresses will be charged the same as shipping to Canada. GU, VI, SAIPAN will be charged the same as international shipping rate.

For Canada shipping please select the lowest price. We do not offer expedited shipping.

US Territories such as GU, VI, SAIPAN will be charged the same as international shipping rate. Transaction will be held until a full shipping amount received.

Some of the packages cannot be delivered to a PO Box. Customer is responsible to ensure PO Box address given is deliverable by the shipping company. Package will be held until a valid physical address is provided.

Customer assumes shipping charges incurred in shipping to undeliverable address.

International buyers are responsible for all customs duties, taxes, and other applicable fees incurred by the country's customs/border regulations. Please contact customs for more information.

We ship 98% of all orders the same or next business day after payment received/cleared. Please understand that once orders are shipped, we cannot control the transit times thereafter. Most orders will ship via USPS First Class/Priority Mail or FedEx/UPS or the best suitable carrier for the specific size of the product.

We are not responsible for any changes to address after item has been shipped.

Turbo Chargers & Parts for Sale

No more Top Gear until 2013, says Jeremy Clarkson

Wed, 09 May 2012

No new Top Gear Series until 2013 Top Gear leader Jeremy Clarkson has revealed to South African Sasha Martinengo on Ballz Radio that there won’t be a new series of Top Gear until 2013. Under normal circumstances we’d expect a new series of Top Gear to arrive in the Autumn of 2012. But it seems not.

Honda FCEV hydrogen Concept teased for Los Angeles Auto Show

Mon, 11 Nov 2013

Honda FCEV hydrogen Concept teased for Los Angeles Auto Show Car makers are all starting to vie for a piece of the hydrogen-powered market for road cars that is starting to develop, and Honda is now joining the fray with the Honda FCEV Concept. The Toyota FCV has already been revealed as debuting at the Tokyo Motor Show and now Honda are in on the act with their own FCEV heading for a debut at Los Angeles later this month. Honda say the FCEV Concept previews a 2015 production model for the US and Japan – and other markets later – and comes more than a decade after Honda first started leasing hydrogen fuel cell cars to a handful of fleet users.

2012 Acura TSX Special Edition aimed at the younger generation

Mon, 29 Aug 2011

Acura is continuing the celebration of its 25th anniversary by creating a special-edition TSX with a slant toward the track. It doesn't add any power, unfortunately, but it does attach the bits that look the part. The 2012 TSX Special Edition package comes with a more aggressive front spoiler, a new bumper fascia, unique side sills and special-edition badges on the trunk.

2040Parts.com © 2012-2024. All Rights Reserved.

Designated trademarks and brands are the property of their respective owners.

Use of this Web site constitutes acceptance of the 2040Parts User Agreement and Privacy Policy.

0.396 s, 11467 u