Find or Sell any Parts for Your Vehicle in USA
Car & Truck Parts > Turbos, Nitrous, Superchargers > Turbo Chargers & Parts

T3 7pc Turbo Kit Turbocharger+manifold+intercooler 98-02 Honda Accord L4 F23 Cg on 2040-parts.com

Location:

Rowland Heights, California, United States

Rowland Heights, California, United States
T3 7PC TURBO KIT TURBOCHARGER+MANIFOLD+INTERCOOLER 98-02 HONDA ACCORD l4 F23 CG, image 1
Condition:New Brand:Speed Daddy Part Brand:speed_daddy Manufacturer Part Number:TBKSDDT04E63+TMHA98L4C7PC Sedan Instruction Included:No Interchange Part Number:Coupe UPC:DOES NOT APPLY

Wheel Hub Quick Release, Racing Seat Combos items in Speed Daddy Com store on eBay!
T3 7PC TURBO KIT TURBOCHARGER+MANIFOLD+INTERCOOLER 98-02 HONDA ACCORD l4 F23 CG
Top Seller, Product & Service! Fast & Easy Shipping!
517.88

STORE CATEGORY
NEWSLETTER!
Add my Store to your Favorites and receive my email newsletters about new items and special promotions!

General Interest
WE ACCEPT
T3 7PC TURBO KIT TURBOCHARGER+MANIFOLD+INTERCOOLER 98-02 HONDA ACCORD l4 F23 CG
Description


    High Compression/ Boosting T04E Turbocharger

    The objective of a turbocharger is to improve the engine's volumetric efficiency by solving one of its cardinal limitations. A naturally aspirated automobile engine uses only the downward stroke of a piston to create an area of low pressure in order to draw air into the cylinder through the intake valves. The pressure in the atmosphere is no more than 1 atm (approximately 14.7 psi), so there ultimately will be a limit to the pressure difference across the intake valves and thus the amount of airflow entering the combustion chamber. Since the turbocharger increases the pressure at the point where air is entering the cylinder, a greater mass of air (oxygen) will be forced in as the inlet manifold pressure increases. The additional air flow makes it possible to maintain the combustion chamber pressure and fuel/air load even at high engine revolution speeds, increasing the power and torque output of the engine.


    Specifics and Benefits:

  • Capable of Boosting Horse Power up to 300+ BHP
  • High Quality Material, Cast Housing with Durable Steel

    Exhaust (Turbo Manifold) Flange:Standard T3/ T4 4-Bolt
    Exhaust (Downpipe) Flange:Standard T3 5-Bolt
    Intake Inlet/ Outlet:3.00"/ 2.00"

    Compressor:
    Trim:55
    A/R:.50
    Inducer:50.50
    Exducer:76.00
    Turbine:
    Trim:73
    A/R:.63
    Inducer:65.50
    Exducer:55.90

    High Performance Cast Iron Exhaust Tubro Manifold

    The heart of any turbo system is the manifold and the turbocharger. These form the basis where the rest of the turbo system is built around. There is no match for durability and strength for cast turbo manifolds. Cast manifolds are more durable over long periods of constant heat cycles like daily driving. Cast turbo manifolds offer short runners resulting in quicker spooling for whatever turbocharger is being used. The shorter runners of the cast manifolds take up little space so that it is possible to keep accessory components, such as air conditioning and power steering, of your engine intact.


    Specifics and Benefits:

  • High Performance Turbo Racing Design
  • Made of High Quality Cast Iron Material for Strength and Durability
  • Computerized Mandrel-Bended to Maximize Air Flow Smoothness
  • TIG Welded CNC Machined Flange for Resistance against Cracking and Wearing
  • Increase Engine Exhaust Output and Efficiency
  • 38mm/ 35mm External Wastegate Port and Flange Included
  • Standard T3 T03 Turbo Flange Configuration Outlet for T3/ T3 & T4 Hybrid Turbo
  • Stainless Steel Dumppipe and Gasket Included
  • Dumppipe Inlet (Port)/ Outlet Diameter: 34mm/ 34mm



    • Lightweight Aluminum Front-Mount Intercooler

    When the charged air enters the end tank, it travels through the tubes of an Intercooler, in which the heat is transferred via fins, where cooler ambient air passes over the tubes. This mechanism further removes heat from air before exiting the opposite end tank and routing to the engine.

    Bar and Plate Intercooler functions identically to the Tube and Fin Core, with the exception that, charged air travels through its rectangular shaped passages, which have more surface area; thus, improves cooling effect and power of the charged air. The advantage of this type of intercoolers is that, since the bar and plate core affords up to 35% larger surface area for cooling, a physically smaller intercooler can be used and still retains the cooling efficiency of a larger tube and fin design. This is important for a builder who has a vehicle with a compact opening in the front of it or when there are immovable obstructions present.


    Specifics and Benefits:

  • High Performance Bar and Plate Turbo Racing Design
  • Made of High Quality T-6061 Aluminum Durable Material
  • Helps Reducing Engine Inlet Temperature
  • Allow More Horsepower at the Same Boost Level and Even More Power at the Higher Boost Level
  • Intercooler Size: 27.00" (L) X 5.50" (H) X 2.50"(W)
  • Core Size: 22.00" (L) X 5.50" (H) X 2.50"(W)
  • Inlet/ Outlet: 2.25"/ 2.25”
  • Direct Front-Mount Installation; Easy to Install



    • Bolt-On Aluminum Intercooler Piping

    Specifics and Benefits:

  • Made of High Quality T-6061 Lightweight Aluminum Piping
  • Powder-Coated Surface Finish
  • 8 Major Pipings' Diameter: 2.50"
  • 1 Connector's Diameter: 2.75"
  • Perfect for Turbo DIY Project
  • Increase 65% Air Flow comparing with other Standard Piping


    Universal 35mm/ 38mm Wastegate with Spring

    Specifics and Benefits:

  • High Strength Cast Steel Body with Steel Head
  • Comes with 8-PSI Spring Installed


    Stainless Steel Braided Oil Feed Line

    Specifics and Benefits:

  • Made of High Quality Stainless Steel Hose
  • 10AN Fittings Anodized Ends
  • Inner Diameter: 0.25"
  • Length: 36.00"
  • 1/8 NPT Fittings Natural Polish Finish


    T3/ T4 5-Bolt Mild Stainless Steel Downpipe Flange

    Specifics and Benefits:

  • Made of High Quality T-304 Mild Steel Durable Material
  • Construction Prevents Warping Due To High Heat
  • 5-Bolt Design Shape
  • 0.50” Thickness Flange
  • Fits T3/ T4 2.5" Diameter 5-Bolt Turbo/ Turbocharger Flange
  • Included for DIY Welding Need


    • 100% Brand New
    Professional Installation is Highly Recommended (No Instruction Included)


    Package Includes:

  • 1 X T04E Turbocharger
  • 1 X Cast Turbo Manifold
  • 1 X External Cast Steel Wastegate WG
  • 1 X Braided Oil Feed Line
  • 1 X Lightweight Aluminum Intercooler
  • 1 X Set of Bolt-On Aluminum Piping as Shown Above

    9-Piece Piping Set Includes:

  • 9 X Aluminum 2.50" Pipings
  • 11 X Silicone Hoses
  • 22 X Bolt-Tight Clamps

  • 1 X T3/ T4 5-Bolt Flange
  • Hardware as Shown in the Picture Above


    Compatible with:

    Direct Bolt-On:
  • 98-02 Honda Accord l4 EX/ LX/ DX/ SE/ VP CG3/ CG5
    (Fits Models with 2.3L F23A4/ F23A5 l4 Engines ONLY)
  • Please Check Compatibilities for Exact Years and Models


    Modification might be Required for Some Universal Parts


Related Products
DOMESTIC LOWER 48 US STATES:



SALES TAX:		 FREE



CA ONLY
VERY IMPORTANT:
Double check shipping address. We are not responsible for incorrect or undeliverable addresses.

Please use Shipping & Payments tab on top of page for shipping details for your location.

Shipping to PR, HI, AK and PO Box addresses will be charged the same as shipping to Canada. GU, VI, SAIPAN will be charged the same as international shipping rate.

For Canada shipping please select the lowest price. We do not offer expedited shipping.

US Territories such as GU, VI, SAIPAN will be charged the same as international shipping rate. Transaction will be held until a full shipping amount received.

Some of the packages cannot be delivered to a PO Box. Customer is responsible to ensure PO Box address given is deliverable by the shipping company. Package will be held until a valid physical address is provided.

Customer assumes shipping charges incurred in shipping to undeliverable address.

International buyers are responsible for all customs duties, taxes, and other applicable fees incurred by the country's customs/border regulations. Please contact customs for more information.

We ship 98% of all orders the same or next business day after payment received/cleared. Please understand that once orders are shipped, we cannot control the transit times thereafter. Most orders will ship via USPS First Class/Priority Mail or FedEx/UPS or the best suitable carrier for the specific size of the product.

We are not responsible for any changes to address after item has been shipped.

Turbo Chargers & Parts for Sale

Volvo's eco-friendly DRIVe (2008): first photos and video

Wed, 10 Sep 2008

By Nick Eaton First Official Pictures 10 September 2008 10:00 DRIVe is Volvo’s new eco-friendly, fuel-efficient technology that will be unveiled at the Paris motor show in October 2008, and we'll see it first on the C30, S40 and V50 1.6-litre diesel models. All of these cars achieve CO2 figures below 120g/km, which places them in the UK's VED tax band B and, according to Volvo, makes them the most efficient cars in their respective classes. UK sales start in January 2009.

Ford reports record $1.7 billion profit

Tue, 26 Oct 2010

Ford Motor Co. reported record third-quarter profits on Tuesday, raised its production forecast and said it will speed up steps to cut its debt. Ford's $1.7 billion in net income was up from $997 million a year earlier.

BMW confirms 5-series hybrid for March arrival in the United States

Fri, 30 Sep 2011

When it comes to hybrids, BMW doesn't take the understated route, cranking up the power and loading eco technologies into some of its most decadent models. The 7-series, the X6--they will never be mistaken for a Toyota Prius. But now comes the mean and green version of the 5-series, called the ActiveHybrid 5, and the Bavarian luxury maker confirmed late Thursday that the car will arrive in U.S.

2040Parts.com © 2012-2024. All Rights Reserved.

Designated trademarks and brands are the property of their respective owners.

Use of this Web site constitutes acceptance of the 2040Parts User Agreement and Privacy Policy.

0.044 s, 11763 u