T3/t4 T04e Turbo Kit Ram Horn W/ Airresearch Turbo Ef Eg Ek Da Dc2 B16 B18 B16a on 2040-parts.com

I had this turbo kit for my Integra but sold the car and the kit has never been installed or used. It is BRAND NEW minus the AiResearch Turbo which was rebuilt and balanced 0 hours ago.

This is an expensive and Genuine AiResearch Turbo, not like many cheap turbos found on Ebay.

Applications:

 * 88-00 Honda Civic All Models with B16/B18 Engine.

 * 88-91 Honda CRX with B16/B18 Engine.

 * 93-97 Honda 93-97 Del Sol with B16/B18 Engine.

 * 90-01 Acura Integra All Model with B16/B18 Engine.

Specifications: 

 * This turbo kit perfect upgrade your car and get more boost.Your car will gain 100-150HP if you set at 7-15PSI.Customers require upgrade the fuel pump,injector and ECU to tune the car if you set at higher PSI.This kit can max up to 400HP.

 * This turbo kit CAN NOT keep the air conditioner and power steering without modification!

Packages Includes:

AirResearch T3/T4 TURBO CHARGER:

 * AiRESEARCH T3/T4 T04 .60AR turbo charger.Max up to 400HP. Just Rebuilt and Balanced. 0 hours

 * Inlet: 3.0 Inch. Outlet: 2.0 Inch.

 * Turbine Flange: T3 Flange. Downpipe Flange: 2.5” 5 Bolts Flange.

 * Type of Bearing: Journal Bearings.

 * Cooling Type: Oil Cooled Only.

 * Oil Inlet: 1/8 NPT.

 * Turbine Trim: .60AR.

 * 0.4G’S @ 73.000 RPM;OIL FLOW 26.71ML/SEC

RAM HORN STAINLESS STEEL TURBO MANIFOLD:

 * Brand new HONDA/ACURA B16/B18 ram horn turbo manifold.Made of high quality T321 stainless steel and fully TIG weld.

 * Direct bolt on design.3.1MM wall thickness,ram horn design for less turbo lag.Quick throttle response.

 * It is good for huge horsepower increase along with improved more air flow,gain 10-15HP.

 * T3 turbo flange fits T3 or T3/T4 turbo chargers,and fits 35MM/38MM turbo wastegates.

2.5” PASSENGER SIDE DOWNPIPE:

 * Brand new HONDA/ACURA D-SERIES/B-SERIES 2.5” 5 bolt passenger side turbo downpipe.Made of high quality T304 stainless steel.

 * Direct bolt on most T3/T4 2.5” 5 bolt turbo charger.

 * It is good for huge horsepower increase along with improved more air flow,gain 5-8HP.

BOLT ON PIPING KIT:

 * Brand new honda/acura b-series/d-series bolt on polished aluminum piping kit. Made of high quality T6061 aluminum.

 * Direct bolt on design.2.5” inlet diameter,increase more airflow.It come with high quality 4PLY silicone couplers and strong and tighter t-bolt clamp.it can support up to 400HP.

27”X7”X2.5” FRONT MOUNT INTERCOOLER:

 * Brand new universal 27”x7”x2.5” front mount intercooler. Made of high quality T6061 aluminum.

 * Tube and fin design.High flow and light weight.Support up to 400HP and 35PSI.

 * Compress air flow rate: 700cubic feet/min.

 * Pressure drop: 0.2-0.5 at 15PSI, 2-5 at 35PSI.

 * Full size: 27”x 7”x 2.5”.Inlet/Outlet: 2.5”

 * Core size: 21”x 7”x 2.5”.

 SSQV TURBO BLOW OFF VALVE BOV:

 * Brand new SQV turbo blow off valve bov. Made of high quality CNC billet aluminum and andized finished.Including O-ring,hardware and flange.

 * Our blow off valves is a dual stage pull-type relief valve. Unlike typical push type blow-off valves,will not leak under any level of boost.

 * It is for maximum performance, incorporates both a small primary valve for ultra quick activation, and a larger secondary valve for additional discharge capacity. It is constructed of billet aluminum, which ensures long-term durability and a high luster look.

38MM TURBO WASTEGATE:

 * Brand new universal 38mm wastegate,made of high quality stainless steel hardware,mating weld flanges are 304L.

 * Set at 7 PSI, fully adjustable.

 * Only 4.35” tall(good for customer working with tight engine compartment.

 * Dual port.Accurate boost pressure,Ultra durable diagram.

38MM DUMP PIPE+ELBOW PIPE:

* Brand new universal 35mm/38mm wastegate turbo dump pipe+elbow,made of high quality stainless steel.

 * Easy clearance in the engine bay,redirect the hot exhaust gas from the wastegate towards the bottom of the engine.Reducing temperature inside the engine bay.Make a very distinct and loud release of air.

OIL RETURN LINE:

 * Brand new 10AN oil drain/return line kit,made of high quality stainless steel braided line and T6061 aluminum fitting.

 * Length: 17”. ID: 0.5”.

 * Helps circulate oil from the turbo to the oil pan.

OIL FEED LINE:

 * Brand new oil feed line,made of high quality stainless steel braided line.Special designed inlet adapter limits oil flow,effectively prevent blown oil seal caused by excessive oil pressure.

 * Length: 36”. ID: 3/8”.

 * Comes with one 1/8 NPT male fitting and one 4AN male fitting.Has restriction build in,offers proper oil feeding to the turbo charger.

TURBO BOOST CONTROLLER:

* Brand new turbo boost controller. Made of high quality CNC machined T6061 aluminum with anodized finish.Comes with hardware for easy installing.

 * Light weight design.Allow you to adjust PSI ratings(1-30PSI)without changing the wastegate springs as well as replacing the wastegate springs.

OIL CATCH TANK:

* Brand new oil catch tank. Made of high quality T6061 aluminum.Come with aluminum bracket,hose and stainless steel clamp to mount your new reserve tanks.

 * The oil catch tank collects the oil mist and condenses the fuel vapors while allowing cleaner gases to be passed back into the intake.It will ensure better performance and better mileage on your engine.

 * Dimensions:6.25”x3.25”x3.25”;Hole inlet size:0.3”;Hold up to 750ML.

TURBO TIMER:

 * Brand new pen style turbo timer.Made of high quality.

 * A turbo timer is a device designed to keep an automotive engine running for a pre-specified period of time in order to automatically execute the cool-down period required to prevent premature turbo wear and failure.
 * A turbo timer can be programmed to leave the engine running for a pre-specified period of time even after ther driver has exited and locked the vehicle. after a period of driving when a turbocharger has been working hard, it is important to let the engine run at idle speed for a period of time, allowing the compressor assembly to cool from the lower gas temperatures in both the exhaust and intake tracts. At the same time the lubricating oil from the engine is able to circulate properly so the turbine won’t burn the lubricating  oil that would otherwise be trapped within the charger with the turbine rotating at high speed.

2” BOOST+AIR/FUEL TINTED GLOWSHIFT GAUGES WITH DASH POD

 * Brand new universal 2” BOOST GAUGE+2” AIR/FUEL GAUGE GAUGE.Made of high quality,light design.

 * Dash pod that fits in to original dash pod area.

 

 * Instruction is NOT included.Professional installation is highly recommended!