Find T4 TURBO KIT GT35 TURBOCHARGER+MANIFOLD+INTERCOOLER+DOWNPIPE 07-08 HONDA FIT GD3 in Rowland Heights, California, United States

Condition:New Brand:Speed Daddy Part Brand:speed_daddy Manufacturer Part Number:TBKSDDTBCGT35FB+TMFITS16 Hatchback Instruction Included:No Other Part Number:7 UPC:DOES NOT APPLY

Wheel Hub Quick Release, Racing Seat Combos items in Speed Daddy Com store on eBay!

STORE CATEGORY

NEWSLETTER!

WE ACCEPT

T4 TURBO KIT GT35 TURBOCHARGER+MANIFOLD+INTERCOOLER+DOWNPIPE 07-08 HONDA FIT GD3

Description

High Compression/ Boosting Float Bearing GT35 Turbocharger

The objective of a turbocharger is to improve the engine's volumetric efficiency by solving one of its cardinal limitations. A naturally aspirated automobile engine uses only the downward stroke of a piston to create an area of low pressure in order to draw air into the cylinder through the intake valves. The pressure in the atmosphere is no more than 1 atm (approximately 14.7 psi), so there ultimately will be a limit to the pressure difference across the intake valves and thus the amount of airflow entering the combustion chamber. Since the turbocharger increases the pressure at the point where air is entering the cylinder, a greater mass of air (oxygen) will be forced in as the inlet manifold pressure increases. The additional air flow makes it possible to maintain the combustion chamber pressure and fuel/air load even at high engine revolution speeds, increasing the power and torque output of the engine.

Specifics and Benefits:

Capable of Boosting Horse Power up to 500+ BHP

High Quality Material, Cast Housing with Durable Steel

Wet Float Bearing Mechanism

Exhaust (Turbo Manifold) Flange:	Standard T3 4-Bolt
Exhaust (Downpipe) Flange:	Standard T3 4-Bolt
Intake Inlet/ Outlet:	4.00"/ 2.50"

Compressor:

Trim:	55
A/R:	.70
Inducer:	57.36
Exducer:	81.87

Turbine:

Trim:	73
A/R:	.63
Inducer:	73.60
Exducer:	57.50

High Performance Exhaust Turbo Manifold

The heart of any Turbo system is the Manifold and the Turbocharger. These form the basis where the rest of the turbo system is built around. Turbo manifolds have only one, but the most critical purpose in turbo systems, and that purpose is to expel exhaust gas into the turbine of a turbocharger as efficiently as possible.

Tubular stainless steel manifolds are chosen over cast manifolds for big power applications. Tubular stainless manifolds feature better and more consistent flow of exhaust gases. Most of the tubular Stainless manifolds also feature the placement of the wastegate flange towards the middle of the collector to allow accurate readings and precise control.

Specifics and Benefits:

High Performance Turbo Racing Design

Made of High Quality T-304 Polished Stainless Steel Alloy Material for Strength and Durability

Computerized Mandrel-Bended to Maximize Air Flow Smoothness

TIG Welded CNC Machined Flange for Resistance against Cracking and Wearing

Increase Engine Exhaust Output and Efficiency

35mm/ 38mm External Wastegate Port and Flange Included

Standard T4 Turbo Flange Configuration Outlet

Fit All T4 or T3/ T4 Hybrid Turbo

Lightweight Aluminum Front-Mount Intercooler

When the charged air enters the end tank, it travels through the tubes of an Intercooler, in which the heat is transferred via fins, where cooler ambient air passes over the tubes. This mechanism further removes heat from air before exiting the opposite end tank and routing to the engine.

Bar and Plate Intercooler functions identically to the Tube and Fin Core, with the exception that, charged air travels through its rectangular shaped passages, which have more surface area; thus, improves cooling effect and power of the charged air. The advantage of this type of intercoolers is that, since the bar and plate core affords up to 35% larger surface area for cooling, a physically smaller intercooler can be used and still retains the cooling efficiency of a larger tube and fin design. This is important for a builder who has a vehicle with a compact opening in the front of it or when there are immovable obstructions present.

Specifics and Benefits:

High Performance Bar and Plate Turbo Racing Design

Made of High Quality T-6061 Aluminum Durable Material

Helps Reducing Engine Inlet Temperature

Allow More Horsepower at the Same Boost Level and Even More Power at the Higher Boost Level

Intercooler Size: 27.00" (L) X 5.50" (H) X 2.50"(W)

Core Size: 22.00" (L) X 5.50" (H) X 2.50"(W)

Inlet/ Outlet: 2.25"/ 2.25”

Direct Front-Mount Installation; Easy to Install

Bolt-On Aluminum Intercooler Piping

Specifics and Benefits:

Made of High Quality T-6061 Lightweight Aluminum Piping

Powder-Coated Surface Finish

Piping Diameter: 2.50"

Perfect for Turbo DIY Project

Increase 65% Air Flow comparing with other Standard Piping

Lightweight Stainless Steel Down Pipe

The most restrictive part of any exhaust system is the catalytic converter. The stock catalytic converter is meant to filter the flow of exhaust gases to reduce the amount of harmful gases into the atmosphere. Because of this, lots of potential performance is restrained. Down Pipes eliminate the stock catalytic converter and reduce exhaust backpressure. By maximizing exhaust flow, this downpipe allows the turbo to spool up and build boost quicker. The result brings out the vehicle’s performance potential by giving it a free high flowing exhaust system.

Specifics and Benefits:

Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends

i.e. Maximizing Smoothest Exhaust Airflow

High Performance JDM Racing Design

TIG Welded CNC Machine Flange for Strength and Durability

Inlet: 2.50” Inner Diameter (For GT35 4-Bolt Exhaust Side Flange)

Outlet Sizes: 2.25” Inner Diameter (Standard Honda 3-Bolt Flange)

Piping Diameter: 2.25"

Increase Engine Output and Efficiency

Instantly Gains 10 - 15 HPs

O2 Sensor Bung Insertion; Metal Gasket(s) Included

Universal 35mm/ 38mm Wastegate with Spring

Specifics and Benefits:

High Strength Cast Steel Body with Steel Head

Comes with 8-PSI Spring Installed

Type-RS Adjustable Aluminum Billet Blow Off Valve BOV

The Blow-Off valve (BOV) is a pressure relief device on the intake tract to prevent the turbo’s compressor from going into surge. When the throttle is closed rapidly, the airflow is quickly reduced, causing flow instability and pressure fluctuations. Surge can eventually lead to thrust bearing failure due to the high loads associated with it. Blow-Off valves use a combination of manifold pressure signal and spring force to detect when the throttle is closed. When the throttle is closed rapidly, the BOV vents boost in the intake tract to atmosphere to relieve the pressure, helping to eliminate surge.

Specifics and Benefits:

Billet Aluminum Body

8 Discharge Ports That Draw In Surrounding Air and Release a Unique Discharge Sound

40mm, Hard-Anodized Valve for Increased Airflow

Dual Spring System Promoted Response and Allows for High Boost Pressures

Holds Up to 30 PSI Boost Pressure

Aggressive JDM Racing Discharge Sound

2-Bolt Mounting Design

Aluminum 2.5” Flange Pipe

Specifics and Benefits:

Made of High Quality T-6061 Aluminum, Lightweight, Heat-Persistent Design

2.5" Pipe Size

30 PSI Turbo Boost Controller

Specifics and Benefits:

CNC Machined Aluminum Body

1-30 PSI Adjustable

Universal Box Style Programmable LED Turbo Timer

Specifics and Benefits:

Allows the Vehicle to Idle the Engine, for the Timed Period, with the Ignition Key Removed

Auto Mode - Precise Calculation of Cool Down Period to Ensure Proper Cool Down of Turbo-Charged Engine.

Digital Display - Allowing Clear Vision during Day & Night Time.

Universal Adjustable Fuel Pressure Regulator

Specifics and Benefits:

Adjustable from (1-15) psi to 140 Maximum Fuel Pump Capacity

Improves Fuel Delivery Efficiency and Prevents Fuel Starvation for More Consistent Boost and Fuel Flow

Designed to Maintain the Optimal Fuel Rail Pressure for High Performance/ Turbocharged Engine

Delivers Vehicles’ Highest Performance, with Long Life and Highly Reliable Operation

Comes with Hose, Bolts, Connectors and Installation Kits

Universal Braided Stainless Steel 10AN Oil Drain Line

Specifics and Benefits:

Stainless Steel Braided Hose 1/2" Inner Diameter 20.00" Length

10AN Fittings Anodized Finish

Weldable 10AN Oil Pan Fitting Included

3.00” Universal Mushroom Type Air Filter

Specifics and Benefits:

Made of Reinforced Material and Covered with Chromed Finish for Lightweight and Durability

3.00” Filter Inlet, 3.00" Inner Diameter Pipe

Performance: Improves Up to 95% Filtration Efficiency

Micro High Density Foam Gauze Type Filter Material, Washable with Water or Soap, and Reusable

High Tolerance Manifold Wrap

Specifics and Benefits:

Made of High Quality Synthetic Fabric Material

Tested to Tolerate Extreme Heat and Wearing Corrosions

Dimensions: 2.00" (Width) X 1/16" (Thick) X 600"/ 50' (Length)

Stainless Steel Braided Oil Feed Line

Specifics and Benefits:

Made of High Quality Stainless Steel Hose

10AN Fittings Anodized Ends

Inner Diameter: 0.25"

Length: 36.00"

1/8 NPT Fittings Natural Polish Finish

Stainless Steel T3/ T4 Turbo Manifold Adaptor

Turbo adapters allows the tuner to use a different turbocharger without having to buy a completely new turbo manifold to fit the new turbo. From there, all the tuner has to do is modify or change their other components to compliment the new turbocharger.

Specifics and Benefits:

Made with High Strength Stainless Steel Alloy Material

Adapts T3 Manifold Flange to T4 with Angle, or Vice Versa

100% Brand New
Professional Installation is Highly Recommended (No Instruction Included)

Package Includes:

1 X T04E Turbocharger

1 X Stainless Steel Turbo Manifold

1 X Set of Racing Downpipe Kits

1 X External Cast Steel Wastegate WG

1 X Type-RS Blow Off Valve Kit

1 X Flange Pipe

1 X Adjustable Boost Controller

1 X Programmable LED Turbo Timer

1 X Adjustable Fuel Pressure Regulator

1 X Braided Oil Feed Line

1 X Oil Drain Line Kit

1 X Lightweight Aluminum Intercooler

1 X Set of Bolt-On Aluminum Piping as Shown Above

6-Piece Piping Set Includes:

6 X Aluminum 2.50" Pipings

9 X Silicone Hoses

15 X Bolt-Tight Clamps

1 X Set of Mounting Brackets

1 X T3/ T4 Turbo Manifold Adaptor

1 X Manifold Wrap

1 X Mushroom Type Air Filter

Hardware as Shown in the Picture Above

Compatible with:

Direct Bolt-On:

07-08 Honda Fit (Jazz) GD3
(Fits Models with 1.5L L15A1 i-VTEC l4 Engines with T3/ T4 Turbo ONLY)

Please Check Compatibilities for Exact Years and Models

Modification might be Required for Some Universal Parts

Biker receives pinoeering surgery

Thu, 13 Mar 2014

A SURVIVOR of a serious motorcycle accident has had pioneering surgery to reconstruct his face using a series of 3D printed parts. Stephen Power is thought to be one of the first trauma patients in the world to have 3D printing used at every stage of the procedure. Doctors at Morriston Hospital in Swansea had to break his cheekbones again before rebuilding his face.

One Lap of the Web: Forsberg can't stop, won't stop drifting

Tue, 08 Apr 2014

-- Jann Mardenborough won the "Nissan GT Academy" back in 2011 and since then has finished on the podium at the 24 Hours of Le Mans, as well as participating in the Infiniti Red Bull Racing driver program with aspirations of Formula One. He explains what it's like to move on from video games -- which he started playing at age 7 -- and transitioning into real sports cars. Mardenborough, it must be said, once drove too fast in British GT to be considered an amateur, but not quick enough to enter the pro class -- and race organizers, who didn't know what else to do, gave him a time penalty so the amateurs could catch up.

Acura announces 2012 TSX pricing, special edition

Fri, 16 Sep 2011

The 2012 Acura TSX sedan and sports wagon gets a $200 price bump across the line, which puts the base model with a five-speed automatic at $30,695. Acura also announced a new Special Edition package ($31,695, including $885 destination) with upgrades to the exterior including a more aggressive front end, bumper and side sills. Seventeen-inch, five-spoke aluminum wheels get a dark gray finish, and a Special Edition badge adorns the trunk lid.

T4 Turbo Kit Gt35 Turbocharger+manifold+intercooler+downpipe 07-08 Honda Fit Gd3 on 2040-parts.com

High Performance Exhaust Turbo Manifold

Lightweight Aluminum Front-Mount Intercooler

Bolt-On Aluminum Intercooler Piping

Lightweight Stainless Steel Down Pipe

Universal 35mm/ 38mm Wastegate with Spring

Type-RS Adjustable Aluminum Billet Blow Off Valve BOV

Aluminum 2.5” Flange Pipe

30 PSI Turbo Boost Controller

Universal Box Style Programmable LED Turbo Timer

Universal Adjustable Fuel Pressure Regulator

Universal Braided Stainless Steel 10AN Oil Drain Line

3.00” Universal Mushroom Type Air Filter

High Tolerance Manifold Wrap

Stainless Steel Braided Oil Feed Line

Stainless Steel T3/ T4 Turbo Manifold Adaptor

Turbo Chargers & Parts for Sale

Biker receives pinoeering surgery

One Lap of the Web: Forsberg can't stop, won't stop drifting

Acura announces 2012 TSX pricing, special edition