Find or Sell any Parts for Your Vehicle in USA

The Rx Oil Catch Can By Mcnally 32oz Dual Valve Chevy Camaro, Corvette All Years on 2040-parts.com

US $339.00
Location:

Sarasota, Florida, United States

Sarasota, Florida, United States
Condition:New Brand:RX Speed Works Surface Finish:Painted Flat Black Manufacturer Part Number:RX-MNSTR-BLK Warranty:Yes UPC:753807330862

         
General
                     
                       
This is the McNally high capacity Oil Separating Catch Can, it has a 32 ounce capacity and includes our clean side separator. This is our largest size can and still the largest oil catch can on the market today utilizing dual valve technology. 

The dual valve system unlike most of the other catch cans on the market provide two vacuum connections. The competitions only evacuate foul vapors utilizing intake manifold vacuum. This means after 3/4 throttle they stop evacuating when you're making the most blow-by vapor

The dual valve system picks up where others leave off and installation is simple. Our clean side separator removes air flow restriction while preventing oil ingestion at the intake. This greatly increases the systems efficiency making all other catch cans inferior.

The kit comes complete with mounting hardware, fittings and hose along with instructions which are also available on our website.  We also have installation videos there as well with contact information so call us anytime for support or with any questions you might have.

       
                                                                                                     
                       
Here on eBay we accept PayPal only but do offer other options on our website.
         
       
                       

All orders are shipped within 24 hours Monday through Friday from our fulfillment center in Zephyrhills, Florida.  We ship via UPS and tracking information is available here in the transaction.
         
       
                       
Feel free to contact us Monday through Friday between the hours of 9am and 5pm EST.  You can also email us through eBay 24 hours a day.  If you need installation support call (941) 377-3230 we're glad to help.
         
       
                              
All of our products have a limited one year guarantee.  If there is an issue with our product, if it fails in any way and is not a result of damage you did, we'll replace it.

Product Warranty:

1. Subject to the conditions and limitations set out in this warranty below, RX Speed Works, Inc. warrants to the original purchaser of (Products) that we will, at our option, repair or replace the Product without charge if the product fails directly as a result of a defect in its manufacture or material used in its manufacture, during the first year after you purchase the product and upon Your presentation to us of proof of purchase. This warranty terminates 1 year after you purchased the product.

2. To the fullest extent permitted by law this warranty does not cover any defect or damage caused by: (a) any act of God, any natural occurrence or any other circumstance beyond our control; or (b) physical abuse, negligence, vandalism, misuse, accidents, exposure to excessive heat, exposure to excessive

moisture, the use of solvents or inappropriate cleaning products/materials, improper maintenance, unauthorized alteration or repair, and/or normal ‘wear and tear’, including without limitation, scratches, stains, dents, and scuffs on the Product (regardless of whether this was caused by You); or (c) use of the

Products for any purpose other than the use for which the Product was intended; or (d) failure to follow the installation instructions of the Product; or (e) general fading and discoloration; (f) variation in color, pattern and shade in the Product against the sample product, displays and/or printed illustrations; or (g)

excessive moisture, excessive heat, or excessive weight; (h) failure to follow any procedures recommended by Us for the fabrication and installation of the Product; (i) non required use of any adhesive, caulk, or other accessory, used to install the Product; (j) faulty workmanship by any person

subsequent to our supply of the Product; (k) anything which has been disclosed as a feature or limitation of the Product (regardless of whether such disclosure is made verbally or in writing); or (l) a defect which is, in Our opinion, trivial or insubstantial.

3. This warranty applies only to Products: (a) which have been purchased from directly from us or our authorized representatives; (b) which have not been moved from their original place of installation or at any time been reinstalled; (c) which have been installed, handled and used in strict compliance with Our recommendations, instructions and directions contained at www.extremeautoproducts.com or provided to you in writing by us; and (d) where you gave use written notice of Your complaint within 7 days of first becoming aware of it.

4. If we determine that a replacement product is not available in the same color, shape, finish or size as the Product covered by this warranty, We reserve the right to provide a replacement product of as close a size, color, shape and finish as is reasonably possible from Our current stock range in satisfaction of

Our obligations under this warranty.

5. To the extent permitted by law, We will not be liable in respect of the warranty (a) for loss caused by the fact that We no longer stock a type or color match of Product; (b) for injury or damages of any kind or nature to person or property; (c) for any special or consequential damages; caused as a result of a defect in a Product.

6. Subject to any condition or warranty implied in Your favor at law which cannot lawfully be excluded, to the fullest extent permitted by applicable law, Our liability under this warranty or in connection with the Product is limited to: In the case of Products: (i) the replacement of the Products or the supply of equivalent products; (ii) the repair of the Products; (iii) the payment of the cost of replacing the Products or acquiring equivalent products; or (iv) the payment of the cost of having the Products repaired, at Our election.

7. Neither party may transfer or assign this warranty.

8. To be eligible for this warranty, you must contact us here on eBay within 30 days of purchasing a Product. To the extent permitted by law this warranty (and its exclusions, limitations and reservations) is the sole warranty for the Products and we disclaim any other implied warranty or claimed in respect of the Product. This warranty cannot be altered or modified by any party and prior to such time may only be altered or modified by us in writing.

9. Any question with regard to this warranty should be addressed to us here through eBay

           
         
                                                                                       
  
 Spicy Auction Templates
  
 

Ferrari will launch first hybrid in 2013

Wed, 25 Apr 2012

Ferrari will offer its first gasoline-electric hybrid system in 2013. The technology will be featured in the as-yet-unnamed car that will replace the limited-edition Enzo. "We are entering the market with our Formula One-derived hybrid system, which will slash fuel consumption and increase performance," Ferrari CEO Amedeo Felisa told Automotive News Europe on the sidelines of the Beijing motor show.

Rolls-Royce Phantom Drophead Coupe

Tue, 09 Jan 2007

By Ben Oliver Motor Shows 09 January 2007 05:53 Drophead Coupe makes waves in Detroit CAR Online brought you the first pictures of the new open-top Phantom and exclusive video footage last month, but this £260,000 monster still stole the Detroit show when Rolls-Royce chairman Ian Robertson officially unveiled it in what will be by far its biggest market. The 100EX concept on which the production car is based stole the 2004 Geneva show too, and features which we all thought would only be seen on the concept, such as the teak ‘decking’ on the hood cover and the rear-hinged suicide doors, have made it to the finished car. Production starts at Goodwood this summer.

University of Huddersfield Degree Show 2004

Sat, 13 Nov 2004

Nov 13, 2004 - Final year undergraduate students from Britain's University of Huddersfield displayed their work at their annual degree show exhibition in Huddersfield, and also at the New Designers exhibition held in July at the Business Design Centre in London. With 19 graduating students from the BA(Hons) Transport Design course, the range of design projects reflects the broad nature of the discipline; with projects ranging from automotive exteriors and interiors, motorcycles, bridges and urban transportation interfaces. All final year projects have a strong design research element where a student's detailed knowledge and understanding of future market, social and environmental trends validates the project and the core design concept.