Toyota 4runner 2.7l 1996-99, Tacoma 2.4l, 2.7l 1995-98 Starter - Lester 17668 on 2040-parts.com
South El Monte, California, US
ONE YEAR WARRANTY Why purchase a REMANUFACTURED Starter assembly instead of a CHINA NEW? OUR Remanufactured assemblies are built using the original OE "core", and maintain the highest quality materials as built into the original unit. China NEW are built using Chinese materials- not to OE material specifications, for example: a. Copper purity in starter armature, field coil and solenoid are not to the original OE specifications (less conductivity) b. Starter copper windings (length) in armature, solenoid, field coil not to OE specifications (less output) c. Starter brushes often soft or brittle density (not to OE specifications (shorter life) d. Housings- aluminum purity not to OE specifications -tooling not to OE specifications- reverse engineered from core sample. e. Internal components- Not to OE specifications, designed by China factory based on their reverse engineering designs. In general, China created specifications, tested to China specifications, and built with China labor results in the lowest “acceptable” cost to US Distributors. These China assemblies are not equal to the original assembly specifications and original components. With our remanufactured from original OE assemblies, you receive the quality, value and durability you expect. This STARTER is Remanufactured from a DENSO OSGR series starter core, and meets or exceeds all TOYOTA/DENSO original factory assembly specifications. This Starter fits the following vehicle application and model years: (1999-96) Toyota 4Runner 2.7L
(1998-95) Toyota T100 Pickup 2.7L w/AT
(2004-95) Toyota Tacoma 2.4L, 2.7L
THIS STARTER REPLACES THE FOLLOWING PART NUMBERS:
Denso 228000-257, 228000-261, 228000-374
Toyota 28100-0C010, 28100-75070, 28100-75090
The assembly listed is a correct replacement for the original assembly that came with your vehicle.
As a Supplier of both NEW and REMANUFACTURED assemblies, we have the expertise and knowledge based on years of experience in building, assembling and both starter motors and alternators. We have our own in house production lines that produce both NEW and REMANUFACTURED assemblies. Both are built with the same care and attention to detail necessary to insure Quality, Durability, and Long Life. Our team has over 20 year’s average experience PE in building and remanufacturing these assemblies. With this strong background of experience, we know where the critical components and potential failure issues are, and build with this knowledge to prevent future similar failures.
Our assembly lines have computerized test stands that have the identical testing parameters as those on the test stands in the original production factories. The assemblies are tested through the complete range of operation, (simulation of vehicle operation) and output curves are then compared by computer to insure compliance with individual specifications and ranges. Only then after passing this comprehensive testing are our assemblies released.
We take no short cuts or supply modified assemblies. In our remanufacturing process, all assembly cores are completely torn down to sub-component level. All components are then tested to the original component specifications, and those that do not meet specifications are 100% replaced. Using the original "cores" provides you with the confidence that you are receiving the best assembly.
Our assembly internal components are identical to the original. Copper windings are to the Original specification and correct purity. Brushes meet the original specifications. The pinion is correctly tempered and hardened to OE specification. The starter solenoid has the same gauge copper wire and correct "length" in windings as the original solenoid. With our assemblies, you can be assured you are receiving the highest quality at competitive pricing!
All Remanufactured assemblies are produced in the US with our US Production team!!
New assemblies are built to our specific specifications and tested 100% on our computer test stands before released from production. We have our own brand, Installer’s Select, which is know industry wide and respected as a high quality line of starters and alternators.
Should you have any questions, or require technical assistance, please call our technical Service Team at
626-442-1118
for a fast response to your inquiry.
ASSEMBLIES ARE SHIPPED FREIGHT PREPAID,
AND CARRY A 12 MONTH WARRANTY
Other for Sale
porsche 912 generator bosch 12v gr15x 1969 oem(US $129.00)
Saab 9-5 alternator/generator bosch 98 99 00 01 02 03 130amp 3.0l(US $115.00)
ac delco 10068600 starter shield(US $15.00)
New oem dual alternator to voltage regulator wiring f250 350 450 f550 super duty(US $44.00)
Taylor cable battery terminal eyelet-style brass 1-1/0 gauge 3/8" hole each(US $15.97)
Taylor cable 21412 battery terminal post-style brass 1-1/0 gauge each(US $15.97)
Volkswagen XL1 Super Efficient Vehicle (SEV) spy video
Fri, 23 Mar 2012Volkswagen XL1 caught on video The Volkswagen XL1 – a super efficient diesel hybrid – caught on video winter testing and undisguised. The VW XL1 arrived at the Qatar Motor Show in 2011, a two-seater diesel-electric hybrid with a design that looks like it came from a 1920s view of the future, and claims of a gazillion miles to the gallon. At the time VW debuted the XL1 we reckoned there was as much chance of it going in to production as McLaren’s latest Formula One car making it in to a showroom, and that the XL1 was just a test bed for all the future tech that might just find its way in to Volkswagen’s road cars.
IFR Aspid strikes Spanish gold
Fri, 08 Aug 2008By Tom Richards Motor Industry 08 August 2008 13:32 More than 100 potential IFR Aspid customers have signed up for a two-day test drive following the new two-seater sports car's unveiling at the London motor show last month. Now the Spanish manufacturer is seeking to create an international dealer network.The Aspid has been in secret development for five years, with IFR working hard on making it relevant to the needs to the 21st century. Although there are no definite CO2 figures, a kerbweight of 700kg means the Aspid should be capable 56.4mpg, they say. The chassis and suspension are aluminium, while the bodywork is carbonfibre and the brakes are made from stainless steel. Definitely.
Chevrolet Corvette Grand Sport (2010) first picture
Mon, 27 Apr 2009Corvette Grand Sport (2010) first pictures By Ben Pulman First Official Pictures 27 April 2009 09:14 Despite the hard times, General Motors is pushing ahead with launching new product. Its latest model is this Corvette Grand Sport, and while it won’t revive the company’s fortunes, at least it’ll help ‘Vette enthusiasts forget about the future. It’s a wide-body ‘Vette with track-tuned suspension.