Find or Sell any Parts for Your Vehicle in USA
Car & Truck Parts > Suspension & Steering > Caster/Camber Kits

Traction Control+strut Bar+6pc Blue Front+rear Camber Kits 88-91 Civic/crx Ed/ee on 2040-parts.com

US $696.98
Location:

Rowland Heights, California, United States

Rowland Heights, California, United States
TRACTION CONTROL+STRUT BAR+6PC BLUE FRONT+REAR CAMBER KITS 88-91 CIVIC/CRX ED/EE, US $696.98, image 1
Condition:New Brand:Speed Daddy Surface Finish:Powder-Coated Manufacturer Part Number:SPK11PCHC88CBKF+ALU+9501BL Coupe Sedan Hatchback Color:Blue Interchange Part Number:Powder-Coated Stainless Steel Alloy Suspension Kit Materials:Stainless Steel Alloy Camber Kits Other Part Number:CNC Machined Camber Control Kit/Arm/Bar/Brace Instruction Included:No Placement on Vehicle:Rear UPC:DOES NOT APPLY Part Brand:speed_daddy

Wheel Hub Quick Release, Racing Seat Combos items in Speed Daddy Com store on eBay!
STORE CATEGORY
NEWSLETTER!
Add my Store to your Favorites and receive my email newsletters about new items and special promotions!

General Interest
WE ACCEPT
TRACTION CONTROL+STRUT BAR+6PC BLUE FRONT+REAR CAMBER KITS 88-91 CIVIC/CRX ED/EE
Description


Adjustable Light Weight Traction Control Bar

A traction control bars are used in stiffening the suspension systems of vehicles. It utilizes coil springs as part of their suspension system with a pair of traction bars being used in the place of the lower control arms. Each traction bar comprises a rigid, elongated control arm and a frame member, with the control arm pivotally connected at its normally forward end to the frame member. The latter is fixedly connected to a vehicle's axle housing while the control arm extends forwardly to the frame for pivotal connection at its forward end to a forward, lower control arm bracket. The frame is provided with vertically oriented adjusting bolts for engagement with the control. For racing usage, the adjusting bolts are locked against the control arm to prevent it from moving vertically toward the frame and, for street uses, the adjusting bolts are backed off from contact with the control arm to allow vertical movement of the arm toward the frame.


Specifics and Benefits:

  • Reinforces Traction of Rear Tires by Enforcing their Contact with the Ground
  • Reduces Front Vehicle Crash mount and Overall Weight
  • Helps Eliminate Scraping with Lowering Vehicles
  • 3 Adjustable Ride Height Settings
  • Made with Lightweight Steel Alloy with Polished Finish
  • Includes Aluminum Rods
  • Nuts and bolts are Included


    4-Piece 40mm Anodized Aluminum Strut Bars

    A strut bar, strut brace, or strut tower brace (STB) is a car suspension accessory usually used in conjunction with MacPherson struts on monocoque or unibody chassis to provide extra stiffness between the strut towers.

    This Combo includes:

  • 1 X Front Upper Strut Tower Bar
  • 1 X Front Lower Strut Bar
  • 1 X Rear Upper Strut Bar
  • 1 X Rear Lower Tie Bar


    • Specifics and Benefits:

  • Enhances Steering Response and Stability
  • Increases Stiffness and Reduces Body Rolling during Corning
  • Made of Light Weight and High Quality T6061 Aluminum
  • Direct Bolt-On Design Improving Ease of Installation
  • 35mm Width Front and Rear Lower Tie Bars/ 23mm Width Diameter Front Tower and Rear Upper Bars


    4-Piece Adjustable High Strength Front Camber Kit

    When a car’s suspension is upgraded with lowering springs, the result is a lower ride height, a more aggressive look, and better handling due to the lowered center of gravity. While those things are great improvements for the car, the tires suffers from increased wearing and tearing since the tires will slant inwards towards the inside fender. A camber kit will allow the car to remain at the lowered ride height while correcting the angle of the tire closer to the spec it was supposed to be.


    Specifics and Benefits:

  • Corrects Camber +1.25/- 3.00 Degrees and brings Quicker Response
  • Ensure Even or Desired Contact with the Ground;
       i.e. Tires Wear more Evenly and Increases Traction and Handling
  • Made of High Quality Lightweight CNC Machined Steel Alloy Material
  • OE Type Powder-Coated Bushing Finish for the Highest Durability
  • Direct Bolt-On Installation or Replacement



    • Adjustable High Strength Rear Camber Kit

    When a car’s suspension is upgraded with lowering springs, the result is a lower ride height, a more aggressive look, and better handling due to the lowered center of gravity. While those things are great improvements for the car, the tires suffers from increased wearing and tearing since the tires will slant inwards towards the inside fender. A camber kit will allow the car to remain at the lowered ride height while correcting the angle of the tire closer to the spec it was supposed to be.


    Specifics and Benefits:

  • Corrects Camber +4.00 / - 4.00 Degrees and brings Quicker Response
  • Improves Rear Suspension, Handling, Predictable Response and even Prevents Premature Tire Wearing.
  • Ensure Even or Desired Contact with the Ground;
       i.e. Tires Wear more Evenly and Increases Traction and Handling
  • Made of High Quality Lightweight CNC Machined Steel Alloy Material
  • OE Type Powder-Coated Bushing Finish for the Highest Durability
  • Design for Street, Track or Drift Racing Precise Adjustments with Long Service Life
  • Direct Bolt-On Installation or Replacement



    • 100% Brand New
    Professional Installation is Highly Recommended (No Instruction Included)



    Package Includes:

  • 1 X Complete Set of Front + Rear & Upper + Lower Strut Bars
  • 1 X Set of Traction Control Bar and Arms
  • 1 X Set (4 Pieces) of Front Camber Kits
  • 1 X Pair (Left + Right) of Rear Camber Kits
  • Necessary Hardware as Shown in the Picture Above


    • Application:

  • 88 - 91 Honda Civic - ED3/ ED4/ ED6/ ED7
  • 88 - 91 Honda CR-X - ED8/ ED9/ EE2/ EE4


    •    Alignment is Highly Recommended After Install


    Our Installation Demonstration of This Item:


    Related Products
    DOMESTIC LOWER 48 US STATES:



    SALES TAX:    		 FREE



    CA ONLY
    VERY IMPORTANT:
    Double check shipping address. We are not responsible for incorrect or undeliverable addresses.

    Please use Shipping & Payments tab on top of page for shipping details for your location.

    Shipping to PR, HI, AK and PO Box addresses will be charged the same as shipping to Canada. GU, VI, SAIPAN will be charged the same as international shipping rate.

    For Canada shipping please select the lowest price. We do not offer expedited shipping.

    US Territories such as GU, VI, SAIPAN will be charged the same as international shipping rate. Transaction will be held until a full shipping amount received.

    Some of the packages cannot be delivered to a PO Box. Customer is responsible to ensure PO Box address given is deliverable by the shipping company. Package will be held until a valid physical address is provided.

    Customer assumes shipping charges incurred in shipping to undeliverable address.

    International buyers are responsible for all customs duties, taxes, and other applicable fees incurred by the country's customs/border regulations. Please contact customs for more information.

    We ship 98% of all orders the same or next business day after payment received/cleared. Please understand that once orders are shipped, we cannot control the transit times thereafter. Most orders will ship via USPS First Class/Priority Mail or FedEx/UPS or the best suitable carrier for the specific size of the product.

    We are not responsible for any changes to address after item has been shipped.

    Caster/Camber Kits for Sale

    Durheimer succeeds Paefgen at Bentley, Bugatti

    Mon, 29 Nov 2010

    Porsche R&D chief Wolfgang Durheimer has been named the new head of Bentley and Bugatti to replace Franz-Josef Paefgen, who is retiring. Durheimer, 52, also becomes head of motorsports for the Volkswagen Group, beginning in February. Paefgen, 64, has lead Bentley since 2002 and Bugatti since 2007.

    Ford launches Cobra Jet and Boss Mustangs

    Thu, 09 Dec 2010

    Two new potent Mustangs that channel the past but pack serious modern muscle will soon be available for enthusiasts. Ford revealed the 2012 M-FR500 Cobra Jet Mustang for drag racing at the Performance Racing Industry Show in Orlando on Thursday. For road racers, the Blue Oval is adding the 2011 Mustang Boss 302S.

    Mercedes A45 AMG: Official

    Wed, 13 Feb 2013

    The Mercedes A45 AMG – Mercedes’ first ’Hot Hatch’ – has been revealed ahead of a debut at Geneva 2013. It gets 355bhp and does 0-62mph in 4.6 seconds. The 2.0 litre turbo 4-cylinder engine under the bonnet of the A45 produces a very healthy 355bhp and 332lb/ft of torque, enough to scoot the A45 AMG to 62mph in 4.6 seconds yet still returns official economy of 34mpg.

    2040Parts.com © 2012-2025. All Rights Reserved.

    Designated trademarks and brands are the property of their respective owners.

    Use of this Web site constitutes acceptance of the 2040Parts User Agreement and Privacy Policy.

    0.047 s, 11830 u