Tribal Low Rider Boat Wrap - Customized For Your Boat - Choose Your Color on 2040-parts.com
US $595.00
Location:
Naples, Florida, United States
Condition:New
Decal Type:Wrap
Country/Region of Manufacture:United States
 |
Tribal Low Rider Boat Wrap Phone (239) 431-7356 Monday-Friday 8am to 5pm (e.s.t) Sold in directional pairs, one left and one right side.
This wrap purchase is for a boat wrap to fit on a boat that is between 18 feet to 20 feet in length
From the rubrail down to the waterline.**
Longer boats may cost a little more. Smaller boat sizes are fine as well. We
will customize the wrap AFTER purchase to fit the actual year, make and
model of your specific boat
to show the most available image area to
achieve the best visual display. Our boat wraps can be fitted to accommodate most boat models.
Once ordered and paid for, you will NEED to
provide the
year, make, model, length of your boat and a side shot picture
as well as very accurate dimensions.
SEE EXAMPLE OF HOW TO MEASURE BELOW
Please email us with details.
Once you have approved the layout, we will manufacture it and ship within 36-48 hours. All products made on site.
Wrap will have excess in the front and rear as well as the top and bottom to allow for appropriate amount of trim.
Set up to be trimmed at the nose and a few inches around the back toward the motor. Your graphics color may vary slightly from what you see depending on you monitor Setting.
(boat not included, ha!)
Material is 3M IJ180 cv3 cast boat wrap vinyl film with 3M 8518 cast overlaminate for maximum UV protection.
Shipping to the lower 48 U.S. only. No shipping to Hawaii and Alaska. |
|
Please try to follow these instructions to ensure success.
1. Specify the color or design you prefer, such as “Green” or "Diver & Octopus".
2. Submit an image of the boat. Make it a nice side shot like this example.
Submit images and artwork to:
3. Take some dimensions of the boat hull. Be sure to include the length along the rubrail,
the max depth from the rubrail down to the waterline edge where the wrap will end,
then along the hull every 2 feet or so as shown in the diagram.
4. Your wrap print will ALWAYS have more length and width than the actual dimensions
you send for “wiggle room” and proper trimming.
5. Be sure to include the year, make and model of your boat.
6. We submit a final mockup layout for your written approval showing the wrap you
chose superimposed on the image of your boat hull.
7. Once we receive your approval the finished boat wrap is produced
and shipped within 36 to 48 hours.
YOUR WRAP WILL COME IN A RECTANGLE SHAPE AS SHOWN IN THE ABOVE
EXAMPLE. THIS ALLOWS FOR PLENTY OF TRIM AREA.
** 3b. If you want your boat wrap to go up
over the rubrail into the gunwales, or if you want the bow or stern
wrapped as well, you need to provide those dimensions as well. This will add to the cost. You can
use the below diagram as a reference to ensure your wrap fits and
presents itself the best.
|
We have many variations of our graphics and also provide custom colors upon request.
If you have any questions, Please don't hesitate to call.
|
|
|
|
Decals for Sale
Mon, 13 Sep 2010
Lexus plans to introduce hybrid versions of existing vehicles with each full model change, the brand's r&d chief says. Leveraging the electric-gasoline drivetrain technology of Lexus' parent company, Toyota, will be key to differentiating the brand from European rivals, said Kiyotaka Ise, Toyota Motor Corp. managing officer in charge of Lexus development.
Wed, 31 Jul 2013
The Jaguar XKR-S GT (pictured at Goodwood FoS) will be available in the UK
At the New York Auto Show in the spring, the Jaguar XKR-S GT was revealed as a track inspired, but road legal, version of the XKR-S to be sold in limited numbers and only for the US market. At first we thought the XKR-S GT was destined for both the US and UK, but it quickly became clear that Jaguar intended their XKR-S GT just for the US. Which seemed a shame.
Fri, 01 Nov 2013
PORSCHE has taken the wraps off its new Panamera Turbo S, built for those who think the regular Turbo is neither fast nor exclusive enough. Prices will start at more than £131,000 for the car, which uses a twin-turbocharged 562bhp V8 petrol engine and four-wheel drive to catapult its two-tonne bulk to 62mph in just 3.8 seconds, on the way to a top speed of 192mph. Fuel economy is recorded as 27.7mpg on the European standard ‘combined cycle’ average, but drivers in the real world should expect around 20.
Twist boat wrap - customized for your boat - choose your color(US $595.00)
Nos original vintage chris craft metal emblem plates 1 pair 04 44-30302 rwb ds(US $225.00)
Caravelle interceptor 232 'tribal" graphics(US $150.00)
Genesis tribal grunge checkered racing flag boat wrap - customized for your boat(US $595.00)
3 tracker marine black bass buggy marine vinyl decals 18 x 2 1/2 inch(US $29.99)
Jet 4 tribal metal boat wrap - customized for your boat(US $595.00)