Find or Sell any Parts for Your Vehicle in USA

Tungsten4x4 Electricwinch 4000lbs 1.6hp Atv Utv Winch T4000 on 2040-parts.com

US $134.99
Location:

Tallahassee, Florida, United States

Tallahassee, Florida, United States
Condition:New Fits:car, Jeep, ATV, UTV Placement on Vehicle:Front Brand:Tungsten4x4 Warranty:Yes Manufacturer Part Number:TS40 UPC:858150005082

   
Details  
  • 1.6 HP, 12V permanent magnetic motor and 3-Stage Planetary Gear System.
  • Rated line pull of 4000 lbs, hawse fairlead included.
  • Completely waterproof,IP67 rating. 
  • Conveniently and safety.
  • Automatic braking locks rope to prevent free spooling.
  • Shippment: American Mainland Only.  

   
 Specifications   
  • Rated line pull: 4000 lbs 
  • Permanent magnetic motor: 1.6 HP/1.2 KW, DC 12V 
  • Wire rope: 6/25" x 32.8′ 
  • Gear Ratio: 198 : 1 
  • Drum size: 1.97" x 3" 
  • Bolt pattern: 4.88 x 3" 
  • Dimensions: 13.15" x 4.49" x 4.72" 
  • Item Weight: 22 lbs 

 photo T4000 Atv Utv Winch_zpsoblglqoj.jpg
 photo T4000 Atv Utv Winchb_zpsx3mseubl.jpg
 photo T4000 Atv Utv Wincha_zpsb6fyycgg.jpg
 photo T4000 Atv Utv Winchb_zpsx3mseubl.jpg
 photo T4000 Atv Utv Winchd_zpssryka3m4.jpg
 photo T4000 Atv Utv Winche_zps0uo9i9yr.jpg
   
Product Description 
With the Tungsten4x4 4,000lb capacity winch, you’ll never be stuck again! Tungsten4x4 4,000lb capacity, and the internal components make this design extremely durable yet surprisingly affordable.

Designed to be used for the ATV, UTV and car, boat, multi purpose utility trailers. This compact winch has a higher level of ability for those who require the extra power for tougher jobs. Simple and easy to use, this winch will make your day smoother when hauling a load on board or when used for self recovery. By using only the best quality electrical components  in the business, the Tungsten4x4 Performance 4,000lb winch will last for years to come, and still retains the BEST WARRANTY in the business.

So don't miss your chance to buy the Tungsten4x4 Winch, far below their retail value.

   
Seller Warranty Description 

TUNGSTEN LLC. offers a limited THREE (3) years warranty to the original retail purchaser or online shopping for each new TUNGSTEN winch, used as a recreational recovery winch only, against manufacturing defects in workmanship and materials on all mechanical components. Electrical components consisting of motors, solenoids, wiring, wire connectors and associated parts have a limited ONE (1) year warranty. There is no applicable warranty after initial use. Warranty registration cards for each winch must be submitted at the time of purchase or within 30 days by the end user. Registration cards must reference winch serial number (appeared on the side of box and drum support) to be valid. Warranty will only be valid for the original purchaser of the winch and installed on the vehicle for which it was original registered. The owner will be responsible for removing the winch and returning it to TUNGSTEN freight prepaid unless a determination is made that replacement parts can be sent out which will remedy the problem. TUNGSTEN will repair or replace any or all winch parts, which after inspection determines to be defective. TUNGSTEN electric winches are intended for recreational self recovery usage. The warranty is void if the winch is used in commercial or industrial applications. The obligation under this warranty, statutory or otherwise, is limited to the replacement or repair at the manufacturer's factory, or at a point designated by the manufacturers, upon inspection of such part(s) as shall appear to the manufacturer, upon inspection of such part(s), to have been defective in material of workmanship. This warranty does not obligate TUNGSTEN LLC. to bear the cost of labor or transportation charges in connection with the replacement or repair of defective parts, nor shall it apply to a product upon which repairs or alterations have been made, unless authorized by the manufacturer, or for equipment misused, neglected or improperly installed.

BMW 1 Series ‘M’ won’t happen – BMW 135is instead

Fri, 05 Mar 2010

BMW are planning a hotter 1 Series - the BMW 135is The rumourmill in this business is always rife with what people think is going to happen in the car industry. One of the persistent rumours over the last year has been the return of the BMW M1 moniker to a performance BMW. And we buy in to that.

News watch Jan 2011: today's auto industry news

Fri, 28 Jan 2011

Welcome to CAR Magazine's news aggregator as we round up the daily stories in the auto industry. Top tip: news summaries are added from the top hour-by-hourFriday 28 January 2011• Mazda has signed a deal to supply Nissan with its 5/Premacy MPV from May 2011. Nissan will sell a 'cleary differentiated' version of the people carrier in Japan (Mazda) • VW has begun construction of a new engine plant in Silao, Mexico.

Jaguar XKR GT3 (2007): first news and photos

Fri, 12 Jan 2007

By Tim Pollard First Official Pictures 12 January 2007 10:26 Jaguar XKR GT3: the lowdown The Jaguar XK coupe has been sent on a course of steroids for its race-car transformation. The XKR GT3 was unveiled at the Autosport International Show and will compete in this season's FIA GT3 European Championship. It keeps the 4.2-litre supercharged V8 of the Jaguar XKR road car, but has been tuned to produce at least 475bhp in race trim.