Find or Sell any Parts for Your Vehicle in USA

Turbocharger Chra Core Cartridge For 03-06 Hyundai Terracan 28201-4x700 Sales on 2040-parts.com

Location:

HK, Hong Kong

HK, Hong Kong
Condition:New Brand:MaxSpeedingRods Performance Parts Surface Finish:Brand New Manufacturer Part Number:RHF5, KHF5-2B, RHF5-2B Warranty:Yes Interchange Part Number:28200-4X400 282004X400 Fit 1:Hyundai Terracan 2.9 CRDi 2.9L J3 CR 01 -06 Other Part Number:28201-4X710, 28201-4X701 28201-4X700 UPC:Does not apply

Untitled Document
Free US Shipping Fast international shipping 30 Days Return Policy Secure Shopping
  • Check Description
    Please use the compatibility guide as a reference only. All the key information shows in the item description. Please read through all item information carefully as variants are very common.

     

  • BE SURE
    Please double check all item information in the listing before the purchasing. For anything you concern, but not in the description, please consult our sales representative by eBay message

     

  • BUY WIHT CONFIDENCE
    One determined this is the correct item for you, please select the quantity and click the “Buy It Now” button to place the order

     

     

KHF5-2B Turbo CHRA Cartridge for Hyundai Terracan 2.9 CRDi 282014X710 282014X700
  • KHF5-2B Turbo CHRA Cartridge for Hyundai Terracan 2.9 CRDi 282014X710 282014X700
  • KHF5-2B Turbo CHRA Cartridge for Hyundai Terracan 2.9 CRDi 282014X710 282014X700
  • KHF5-2B Turbo CHRA Cartridge for Hyundai Terracan 2.9 CRDi 282014X710 282014X700
  • KHF5-2B Turbo CHRA Cartridge for Hyundai Terracan 2.9 CRDi 282014X710 282014X700
  • KHF5-2B Turbo CHRA Cartridge for Hyundai Terracan 2.9 CRDi 282014X710 282014X700
  • KHF5-2B Turbo CHRA Cartridge for Hyundai Terracan 2.9 CRDi 282014X710 282014X700

MaXpeedingRods

MaXpeedingRods

KHF5-2B Turbo CHRA Cartridge for Hyundai Terracan 2.9 CRDi 282014X710 282014X700
Description
Application 

Hyundai    Terracan 2.9 CRDi    2.9L    J3 CR    01 -06

 

 
Turbo Part Number & OEM Number

KHF5-2B, RHF5-2B, 28200-4X400, 28201-4X701, 28201-4X700, 28201-4X710

 

 

Note

* Bearing Type: Journal Bearing
* Accessories: You will get exactly as shown in the picture above
* Please confirm your old turbo part number matches up with one of the part numbers above
* It is for repairing or rebuilding the complete turbo
* Professional installation is highly recommended (No Instruction Included)


  • FAQ
  • Shipping
  • Return
  • Warranty
  • Contact us
  • Feedback



    • Installation/Fitting Tips
    • 1.Why turbos fail? – Diagnosis

      Investigate cause of original turbo failure before fitting replacement
      Most turbo failures are due to – Oil Starvation/Contamination, Electronics sensors, Air leaks over speeding turbo, or foreign matter entering compressor housing. Breather problems.

      2.Rectify Malfunction

      Upon completion of diagnosis and conclusion of malfunction or component failure, either you must rectify the malfunction or replace the failed components with new components. Check for foreign particles. All BEFORE you fit the new turbo.

      3.Replace Components

      Before fitting your new Turbo, you must Replace Components listed below
      OIL FEED PIPE (from engine to top of turbo), replace banjo bolts and oil drain
      Replace Turbo oil drain hose (check clear / check no damage to pipe)
      NEW OIL PUMP
      Oil and oil filter (correct grade as per manufacturers recommendation)
      Air filter
      Gaskets and washers, O rings
      Diesel Particulate Filter liquid level sensor topped up with fluid level

      4.Clean or Replace

      Diesel Injectors – Clean, Test, Replace
      Air box and air intake hose to turbo (Pressure Test)
      Oil cooler/ intercooler/ hose, from turbo to intercooler (damage or air leak). Get Pressure Tested
      E.G.R VALVE – Check correct operation, clean or replace if necessary
      Breather system, cam cover (rocker cover) – check for blockage
      Clean Inlet/exhaust manifolds, check for carbon deposits/cracks/clean head faces/replace gaskets
      Ensure the exhaust and/or catalytic converter/diesel particulate filter (DPF) are not fully or partly blocked
      Before fitting Turbo – check no debris enters turbo, check all gaskets fit with gas tight seal
      Flush Engine

      5.Fit and Test Turbo

      Check OIL PRESSURE is within manufacturers Tolerances
      Start engine and allow to idle for 3-5 mins before driving (do not let engine idle unnecessarily)
      Check for Oil/Gasket/Air Leaks, All OBVIOUS locations on engine
      Plug into diagnostic machine to check for any fault codes (rectify or repair as per diagnosis, before road test).

      A professional mechanic or turbo tuning shop is only recommended for the turbo fitting job of your car. The external influence on the failure of the turbo is not included in the warranty. And only with the turbo properly fitted, you will have your car return to the road earlier.

    • Troubles shooting
    • Turbochargers are very reliable: only 1% of turbo failures are due to bad manufacturing or manufacturing errors and therefore problems relating to the engine are far more common causes for turbo failures. Before removing your turbocharger from the vehicle, please check try one of these recommended remedies

      1.Engine Lacks Power
      Worn internal engine components
      Low Boost
      Air filter/pipe blocked
      Air pipe leaking from filter to turbo
      2.Turbo Noisy
      Air leak – exhaust gases leaking from manifold or pipes
      Air filter/pipe blocked
      Air pipe leaking from filter to turbo
      3.Exhaust Smoke
      Check intercooler
      Check head gasket
      Check turbo internal components
      Insufficient oil supply to turbocharger
      Actuator arm stuck in overboost
      4.Boost pressure too high
      Boost pressure control valve is closed- Hoses split or incorrectly fitted
      Check fuel system
      Wastegate activator diaphragm split or incorrectly fitted
      Check fuel system
      5.Excessive Engine Oil Consumption
      Fuel system defective
      Replace or adjust faulty components
      Check Air pipe from turbo to inlet manifold
      Check hoses and intercooler for leaks and replace
      Incorrect operation of crankcase breather system
      Check breather hoses, pipes and one way valves breather system

      More often than not a defective turbocharger is the consequence of some other primary engine defect which cannot be cured just by replacing the turbocharger. Before you fit a new turbo, find out what caused the first unit to fail or you risk the replacement failing too.

  • US Domestic Shipping Notice - All items will be dispatched within 24hrs(Mon-Fri)

    Our carrier collects all the parcels at 4:30am PDT, any payment paid after 5:00am PDT will be shipped the next day at 4:30am PDT.

    If you paid Item Shipped On Est.Delivery Time
    Before Apr. 1st at 4:30am Apr. 1st at 5:00am Apr. 5th - Apr. 7th
    After Apr. 1st at 4:30am Apr. 2nd at 5:00am Apr. 6th - Apr. 8th
    If our estimated delivery time and eBay’s are contradictory,please refer to the standard delivery time of ours.

    Estimated Delivery Time

    From To Service Est.Delivery Time
    US US UPS or Fedex Ground 3-5 Business days
    Outside of US DHL FedEx 4-7 Business days

    Please provide the following shipping information for your order


    Otherwise your shipment will be deferred. We are not responsible for any shipping lost caused by wrong shipping information




    International Shipment

    For international shipment, we do not cover any import taxes or duties. Import tax is charged by the government, not us. Our item price and shipping cost do not include any import tax which will be charged by the shipping company when you got the parcel. Please be noted that is not the extra shipping fee.

  • At MaXpeedingRods, we hope that you are happy with your purchases. We understand sometimes you may need to return or cancel your order. Before you return any item(s) , please read the following policy:
    1. We are happy to offer 30 days returns policy to all our eBay customers.
    2. Please contact us for the return procedure:
    Please contact us for the returns shipping address - Do Not return the item(s) to the address which shows on the eBay invoice directly.
    Please contact our sales representative to obtain a Return Authorization Number. You must print out the return label we provided and put on the packing box. - To get the Return Authorization Number, our sales representative may ask you to provide the video or picture to show the item condition of the item. Any returned item(s) without Return authorization number will be rejected.
    3. Please return your item(s) in original packaging and ensure that all packages are securely wrapped.
    4. The customer is responsible for all postage costs for products returned under our Returns Procedure unless this has been specifically agreed and confirmed in advance with our sales representative.
    5. MaXpeedingRods will not accept responsibility for loss or damage of goods during transit, please ensure that the insurance cover option is taken where possible.
    6. Upon receipt, all products will be inspected at our discretion in 3-5 business days. Then, we will keep you informed the update of results.
  • All MaXpeedingRods products have 12 months warranty (unless otherwise stated). In the very unlikely event that you have a problem with our product, please contact us via eBay messages.
    Full details of warranty are as follows:
    If Goods become faulty during the period of the warranty for reasons unconnected with your acts, omissions or misuse of the Goods, you must notify us in writing and/or by completing a warranty claim form (including a description of the fault) and return such Goods to us. Such Goods shall be followed the return procedure and returned to the manufacturer for review, testing and examination, and the manufacturer will not arrange collection for the product. Based on the manufacturers' opinion, we will be afforded reasonable opportunity and facilities to investigate any claims made under the Warranty.
    The above warranty is given by us subject to you having no liability in respect of any defect arising from wear and tear, willful damage, negligence, tampering of the Goods, incorrect fitting of the Goods by you and/or a third party, abnormal working conditions, failure to follow our and/or the Goods' manufacturers' instructions (whether oral or in writing), misuse or alteration or repair of the Goods without our approval.
  • We encourage our customers to contact us with any eBay related enquiries by using the eBay messaging system. We aim to reply to all messages within 24 hours.
    Our eBay team is available Monday - Friday between 6:00PM - 10:00AM (PDT) but are OFF on the weekends, so messages sent after business hours especially on Friday, will be answered the following Monday.
  • FAQ



    • Installation/Fitting Tips
    • 1.Why turbos fail? – Diagnosis

      Investigate cause of original turbo failure before fitting replacement
      Most turbo failures are due to – Oil Starvation/Contamination, Electronics sensors, Air leaks over speeding turbo, or foreign matter entering compressor housing. Breather problems.

      2.Rectify Malfunction

      Upon completion of diagnosis and conclusion of malfunction or component failure, either you must rectify the malfunction or replace the failed components with new components. Check for foreign particles. All BEFORE you fit the new turbo.

      3.Replace Components

      Before fitting your new Turbo, you must Replace Components listed below
      OIL FEED PIPE (from engine to top of turbo), replace banjo bolts and oil drain
      Replace Turbo oil drain hose (check clear / check no damage to pipe)
      NEW OIL PUMP
      Oil and oil filter (correct grade as per manufacturers recommendation)
      Air filter
      Gaskets and washers, O rings
      Diesel Particulate Filter liquid level sensor topped up with fluid level

      4.Clean or Replace

      Diesel Injectors – Clean, Test, Replace
      Air box and air intake hose to turbo (Pressure Test)
      Oil cooler/ intercooler/ hose, from turbo to intercooler (damage or air leak). Get Pressure Tested
      E.G.R VALVE – Check correct operation, clean or replace if necessary
      Breather system, cam cover (rocker cover) – check for blockage
      Clean Inlet/exhaust manifolds, check for carbon deposits/cracks/clean head faces/replace gaskets
      Ensure the exhaust and/or catalytic converter/diesel particulate filter (DPF) are not fully or partly blocked
      Before fitting Turbo – check no debris enters turbo, check all gaskets fit with gas tight seal
      Flush Engine

      5.Fit and Test Turbo

      Check OIL PRESSURE is within manufacturers Tolerances
      Start engine and allow to idle for 3-5 mins before driving (do not let engine idle unnecessarily)
      Check for Oil/Gasket/Air Leaks, All OBVIOUS locations on engine
      Plug into diagnostic machine to check for any fault codes (rectify or repair as per diagnosis, before road test).

      A professional mechanic or turbo tuning shop is only recommended for the turbo fitting job of your car. The external influence on the failure of the turbo is not included in the warranty. And only with the turbo properly fitted, you will have your car return to the road earlier.

    • Troubles shooting
    • Turbochargers are very reliable: only 1% of turbo failures are due to bad manufacturing or manufacturing errors and therefore problems relating to the engine are far more common causes for turbo failures. Before removing your turbocharger from the vehicle, please check try one of these recommended remedies

      1.Engine Lacks Power
      Worn internal engine components
      Low Boost
      Air filter/pipe blocked
      Air pipe leaking from filter to turbo
      2.Turbo Noisy
      Air leak – exhaust gases leaking from manifold or pipes
      Air filter/pipe blocked
      Air pipe leaking from filter to turbo
      3.Exhaust Smoke
      Check intercooler
      Check head gasket
      Check turbo internal components
      Insufficient oil supply to turbocharger
      Actuator arm stuck in overboost
      4.Boost pressure too high
      Boost pressure control valve is closed- Hoses split or incorrectly fitted
      Check fuel system
      Wastegate activator diaphragm split or incorrectly fitted
      Check fuel system
      5.Excessive Engine Oil Consumption
      Fuel system defective
      Replace or adjust faulty components
      Check Air pipe from turbo to inlet manifold
      Check hoses and intercooler for leaks and replace
      Incorrect operation of crankcase breather system
      Check breather hoses, pipes and one way valves breather system

      More often than not a defective turbocharger is the consequence of some other primary engine defect which cannot be cured just by replacing the turbocharger. Before you fit a new turbo, find out what caused the first unit to fail or you risk the replacement failing too.


  • Description
    Application 

    Hyundai    Terracan 2.9 CRDi    2.9L    J3 CR    01 -06

     

     
    Turbo Part Number & OEM Number

    KHF5-2B, RHF5-2B, 28200-4X400, 28201-4X701, 28201-4X700, 28201-4X710

     

     

    Note

    * Bearing Type: Journal Bearing
    * Accessories: You will get exactly as shown in the picture above
    * Please confirm your old turbo part number matches up with one of the part numbers above
    * It is for repairing or rebuilding the complete turbo
    * Professional installation is highly recommended (No Instruction Included)


  • Shipping

    US Domestic Shipping Notice - All items will be dispatched within 24hrs(Mon-Fri)

    Our carrier collects all the parcels at 4:30am PDT, any payment paid after 5:00am PDT will be shipped the next day at 4:30am PDT.

    If you paid Item Shipped On Est.Delivery Time
    Before Apr. 1st at 4:30am Apr. 1st at 5:00am Apr. 5th - Apr. 7th
    After Apr. 1st at 4:30am Apr. 2nd at 5:00am Apr. 6th - Apr. 8th
    If our estimated delivery time and eBay’s are contradictory,please refer to the standard delivery time of ours.
  • Return
    At MaXpeedingRods, we hope that you are happy with your purchases. We understand sometimes you may need to return or cancel your order. Before you return any item(s) , please read the following policy:
    1. We are happy to offer 30 days returns policy to all our eBay customers.
    2. Please contact us for the return procedure:
    Please contact us for the returns shipping address - Do Not return the item(s) to the address which shows on the eBay invoice directly.
    Please contact our sales representative to obtain a Return Authorization Number. You must print out the return label we provided and put on the packing box. - To get the Return Authorization Number, our sales representative may ask you to provide the video or picture to show the item condition of the item. Any returned item(s) without Return authorization number will be rejected.
    3. Please return your item(s) in original packaging and ensure that all packages are securely wrapped.
    4. The customer is responsible for all postage costs for products returned under our Returns Procedure unless this has been specifically agreed and confirmed in advance with our sales representative.
    5. MaXpeedingRods will not accept responsibility for loss or damage of goods during transit, please ensure that the insurance cover option is taken where possible.
    6. Upon receipt, all products will be inspected at our discretion in 3-5 business days. Then, we will keep you informed the update of results.
  • Warranty
    All MaXpeedingRods products have 12 months warranty (unless otherwise stated). In the very unlikely event that you have a problem with our product, please contact us via eBay messages.
    Full details of warranty are as follows:
    If Goods become faulty during the period of the warranty for reasons unconnected with your acts, omissions or misuse of the Goods, you must notify us in writing and/or by completing a warranty claim form (including a description of the fault) and return such Goods to us. Such Goods shall be followed the return procedure and returned to the manufacturer for review, testing and examination, and the manufacturer will not arrange collection for the product. Based on the manufacturers' opinion, we will be afforded reasonable opportunity and facilities to investigate any claims made under the Warranty.
    The above warranty is given by us subject to you having no liability in respect of any defect arising from wear and tear, willful damage, negligence, tampering of the Goods, incorrect fitting of the Goods by you and/or a third party, abnormal working conditions, failure to follow our and/or the Goods' manufacturers' instructions (whether oral or in writing), misuse or alteration or repair of the Goods without our approval.
  • Contact us
    We encourage our customers to contact us with any eBay related enquiries by using the eBay messaging system. We aim to reply to all messages within 24 hours.
    Our eBay team is available Monday - Friday between 6:00PM - 10:00AM (PDT) but are OFF on the weekends, so messages sent after business hours especially on Friday, will be answered the following Monday.
  • Feedback

Other items you might also like

Turbo Chargers & Parts for Sale

Lamborghini could launch an SUV in 2017, Winkelmann says

Thu, 12 Apr 2012

Lamborghini could launch an SUV in 2017, CEO Stephan Winkelmann told a German newspaper. The Italian supercar brand will unveil a concept for the vehicle at the Beijing motor show on April 23 to test public reaction, according to a report in the German business daily Handelsblatt on Thursday. Winkelmann wants the SUV as a third model line along with the Gallardo and Aventador super cars to help make the brand profitable.

One-off Mustang GT raffled for Multiple Sclerosis Society

Thu, 08 May 2014

Ford Motor Co. is teaming up with the National Multiple Sclerosis Society in an effort to raise money for future research and aid those affected by MS. The Mustang raffle is set for Aug.

Vauxhall VXR8 (2007): first official pictures

Mon, 26 Feb 2007

By Tim Pollard First Official Pictures 26 February 2007 08:01 Vauxhall VXR8: the lowdown Fans of the recently departed Monaro, rejoice! Vauxhall has today announced its replacement, and it's another hairy-chested, Aussie bruiser: this VXR8 four-door. Although lacking the badge pedigree of the Lotus Carlton, comparisons with the fabled 1990s hot saloon aren't wide of the mark.