Find or Sell any Parts for Your Vehicle in USA

Used Yamaha Parts Jet Pump Assembly Reverse Drift Impeller + 2000 Gp 1200 R Pv on 2040-parts.com

US $600.00
Location:

Heber Springs, Arkansas, United States

Heber Springs, Arkansas, United States
Part in used condition. Will show signs of use. May be dirty/stained. May have scratches/scuffs/etc, or other typical signs of use.
Manufacturer Part Number:66V-51312-00-94 66V-45511-00-00 66V-R1321-00-00 Brand:Yamaha Warranty:No

PLEASE READ FULL DESCRIPTION

GhettoWorks Marine & More: Watercraft Sales & Service

Part Name: Complete Jet Pump with Reverse
Part Number:  66V-R1321-00-00
Removed From: 2000 Yamaha GP 1200 R
Description:  Complete jet pump assembly with drive shaft and reverse.  Blade and housing will show typical wear, typical wear to the drift shaft/splines, etc.  Some nicks on the blade possible, some wear to housing (as these models don't have removable wear rings like other models).  But all in all decent shape given the age, seems to spin freely.  Will show typical signs of use/wear, scratches, scuffs, etc.  May be a bit dirty from use/storage.  Used parts may have some dirt/grease, etc. which is to be expected of used parts removed from machines.  Removed from a 2000 Yamaha GP 1200R with 295.7 hours.  All electronics were tested good, everything worked as it should, but the rear cylinder had zero PSI and we decided not to replace the engine but part out the PWC instead.  It looks like the rear cylinder was not getting oil as when we pulled the crankshaft the rear assembly was bone dry.  It did not throw a rod like most 1200s do, however, so it left the engine in good core for rebuild condition.  Includes:
66V-51312-00-94 Impeller Housing
66V-51315-00-94 Impeller Duct 
66V-46882-00-00 Filter 
66V-42414-00-00 O-Ring x2
66V-45214-00-94 Water Inlet Cover
93306-205U0-00 Bearing
65V-45538-00-00 Spacer
93306-304U1-00 Bearing
93101-28M66-00 Oil Seal
93101-28M65-00 Oil Seal
66V-45511-00-00 Drive Shaft
9299R-16600-00 Washer
9531P-16700-00 Nut
65A-R1326-00-00 Cap Kit
93210-46M16-00 O-Ring
90119-069UB-00 Bolt with Washer x2
66V-R1321-00-00 Impeller 
66V-R1348-00-00 Spacer
67X-51318-00-94 Nozzle
66V-R1313-01-00 Deflector Nozzle
90119-089UE-00 Bolt with Washer x2
90387-08M06-00 Collar x2
66G-51190-00-94 Ring Trim
GH3-U146E-00-00 Joint Stud Ball

According to World of Powersports Parts Charts this part will fit on the following models:
2000 Yamaha GP 1200 R
NOTE: The assembly as a whole will only for sure fit on a 2000 GP 1200R like it was removed from.  Individual parts will likely have many different fits, but with so many part #’s included it is too difficult to cross reference them all to other models.  Please use the provided part #’s to determine if this will work for your year and model.  Most of the main parts are likely compatible with several other Yamaha 1200 models but some of the smaller parts may not have many, if any, other models they fit.

ALSO NOTE: We may remove the drive shaft before shipping.  We will try to leave it attached if we can, but in order to minimize chances of damage and to make the box not quite so large, we may remove the drive shaft before shipping.  So be aware of the potential to have to reinstall the drive shaft before installation; it will be included as shown but may be removed for actual shipment.

We recommend you check with your local dealer or refer to OEM Parts charts to insure that this item will fit your unit. It is buyer’s responsibility to research their items before purchase. We can not accept returns because wrong part was ordered. Please contact us with any questions/concerns you may have about this item before making a purchase.

These items retail for more then $2,046.95 plus tax purchased in new condition from a local dealership. All parts removed for sale on e-Bay were tested (if possible/applicable) and deemed to be in usable condition at time of removal. Used items will likely be somewhat dirty, and will show signs of use such as stains, scratches, scuffs, etc.  These items are not new, and will not appear new, but will provide a less expensive alternative to purchasing new parts for your repairs.

Items are sold AS IS in USED condition without warranty; we do not accept returns at this time. We encourage you to contact us if you are dissatisfied with your purchase before leaving feedback. But assume that unless prior arrangements are made, we do not accept returns. Items are tested, if possible/applicable, to be in usable condition before being removed. Any flaws, if applicable, will be noted in the descriptions above. We can not accept returns if the item does not work for you; please insure proper compatibility before making a purchase. Due to their sensitive nature, we do not accept returns on any electrical parts whether they are in new or used condition.  We make certain that all items are in usable condition when they leave our dealership, so we can make no guarantees if you receive an item that does not work or fit in your machine.  Items may need some cleaning and will likely have scuffs/scratches/normal wear as they are in used condition, but should be in good, usable condition.

GhettoWorks currently will ship to the United States and certain international locations only.  If your country is in the exclusions list we do not currently ship to your location.  However, items which are eligible for the Global Shipping Program may be able to ship to your country even if you are in the exclusions list, so feel free to contact us for more details; not all items are Global Shipping Program eligible as determined by eBay.  For any international purchase, please note that import duties, taxes, and any other charges are not included in the item price or shipping cost. You may be charged an additional amount for import duties/fees which we have no control over.  Any such additional charges are buyer’s responsibility.  Please also be aware that these items were made for use within the United States; if you are an international customer, please be aware that you may need to check compatibility as these items may have different specifications or standards then items made for international use.  GhettoWorks is not responsible for any compatibility issues arising from international standards being different than components made for use within the United States.

Shipping will include delivery confirmation (or signature confirmation above 250.00 purchase price), and packaging. We will try to combine shipments when possible when you order multiple items although combined shipping is typically not available on large items like seats/hoods. Please contact us for a shipping quote if you are interested in combined shipments.

Please note that any free shipping offers will apply within the Continental United States ONLY.  All shipments to Alaska, Hawaii, APOs/FPOs, or any U.S. Territories will require additional shipping charges.  Please contact us for a shipping quote if you are unsure, as any free shipping offers will only be honored within the Continental United States.  We reserve the right to charge additional shipping charges to any non-Continental United States shipments.  We will try to keep any additional shipping charges for all other locations to a minimum.

Many of the parts we sell on eBay are quite large, which causes the shipping containers/boxes necessary to ship them to occasionally be oversized.  Unfortunately this means that on our larger items like Hoods/Cowlings and Seats, etc, shipping tends to run a little higher then normal.  We are very sorry about this, but we can not control UPS or the Post Office’s rates which seem to continue to climb higher and higher.  We do our best to keep shipping costs as low as possible.  We are not trying to make money off the postage, we merely are making sure that all the costs of shipping and handling (including packing materials and time to process items) are covered.  Please keep this in mind and don’t hold increasing shipping costs against us when leaving feedback and ratings; we strive for 5-star service wherever possible.  If there is ever a suggestion on how we can improve service to you, our loyal customers, please do not hesitate to contact us.  We value all feedback and comments!

We are more then happy to arrange for free local pickup if you are in our area on any item purchased. This can save shipping charges if you are a local customer or plan to be in the Heber Springs area. However, please note that any item picked up at our dealership, or items shipped to an Arkansas address may be assessed sales tax at the rate appropriate for your local area. Heber Springs sales tax rate is 9.125%; your rate may differ depending on city/county. Any purchase(s) shipped to any non-Arkansas address will not be assessed sales tax.

We accept payment via PayPal, or cash in person if you are picking your purchase(s) up locally.

Our hours of operation change periodically throughout the year; please feel free to contact us if you want to know our current hours of operation. Items typically can not be processed on Sunday or Monday - Saturday processing may or may not be available depending on the time of year.  We will do our best to get your item ready and shipped as soon as possible. Depending on time of day, we try to get items ready same business day when possible. When not possible we do our best to get everything out the next business day; typically your wait will not exceed two business days (not including weekends/holidays). We will notify you if there is any reason why your item can not be shipped promptly. We try to answer all questions promptly.  Please buy with confidence. If you have any questions, do not hesitate to send us a message.

We have many used personal watercraft (SeaDoo, Yamaha, and Kawasaki Brand) which we have to part out. If you are looking for something specific, please contact us. We are more then happy to list anything we have that you may be interested in.

Please note: We provide photos that we have taken ourselves of our exact items so that you can see exactly what you are getting.  Please be aware that on some of our items we may have multiple quantities available. Unless otherwise stated the buy it now price is for one single item. Please note that on items with multiple quantities available, you may receive an item that is slightly different then pictured but that will be of comparable quality.  Please also note that colors are often not reflected well in images due to lighting/camera flash. If you are concerned about the color of an item please feel free to contact us before purchase to verify you are ordering the exact colored item you are intending. This is usually only a concern on items such as seats/hoods/covers but if you are concerned about item color please don't hesitate to contact us ahead of time.

Ignition & Starting Systems for Sale

Audi A3 gets more powerful 2.0 litre TDI & LED lights

Sat, 03 Aug 2013

The Audi A3 (pictured) gets a new 181bhp TDI and LED headlights It still seems astonishing that car makers can match really quite powerful performance with almost parsimonious fuel consumption, but modern turbo diesels and high pressure fuel injection are delivering seemingly silly combinations of performance and economy. Like the 2.0 litre diesel Audi are now offering in the new A3. The new 2.0 litre diesel, which is now available on the new A3 and Sportback (with the A3 saloon to follow) – gets a very decent 181bhp and 280lb/ft of torque, which is enough to hit 62mph in just 7.3 seconds.

New Ford Mustang leaks out ahead of official reveal

Wed, 04 Dec 2013

The first photo of the 2015 Ford Mustang Ford has been busy getting ready for a reveal of the new 2015 Ford Mustang on the 5th December, but their powder has been made a little damp by scanned images from Autoweek’s story on the new Mustang leaking out ahead of publication. The new Mustang still looks like a Mustang, but in a  nod to Ford’s European styling mantra it gets a version of the Aston Martin like grill now proliferating across Ford’s European range together headlights incorporating LEDs. At the back, the new Mustang has the required three bar lights and a new diffuser, whilst the interior looks decent quality if a little retro in style.

Dinan S3 boosts BMW 550i to M5 levels

Thu, 06 Jun 2013

Dinan introduced the 2013 BMW 550i S3 on Tuesday. The tuner upgrades the already quick sedan to 542 hp, but claims to retain enough refinement to be a daily driver. The upgrade is also factory backed for four years or 50,000 miles by Dinan's nationwide network of service centers.